CISCO-WAN-RPM-CONN-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

cwRpmChanExtTable

table
.1.3.6.1.4.1.351.150.9.1.1.1 · 1 row entry · 10 columns
Open in standard view 
This table together with the 'cwAtmChanCnfgTable' support
provisioning of PVC endpoints and SPVCs on an RPM.  This
table contains objects that are specific to RPM.
This table is an augmentation to the 'cwAtmChanCnfgTable'.
cwRpmChanExtEntry entry .1.3.6.1.4.1.351.150.9.1.1.1.1
Each entry contains RPM specific parameters for a
connection endpoint on an RPM.
Indexes
No indexes recorded
Column Syntax OID
cwrChanSubInterface
The RPM's backplane sub-interface for which this channel
is configured. Sub-interface 0 means the switch port.
Unsigned32r/w
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.351.150.9.1.1.1.1.1
cwrChanVcd
Virtual Circuit Descriptor. A unique number which identifies
a connection.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.351.150.9.1.1.1.1.2
cwrChanAalEncapType
ATM adaptation layer (AAL) and Encapsulation type.

aal5ciscoPPP - For Cisco PPP over ATM.
'cwrChanVirtualTemplate' is required to be
set for this type.
aal5muxAPO…
Enumerationr/w
Enumerated Values:
1aal5ciscoPPP
2aal5muxAPOLLO
3aal5muxAPPLETALK
4aal5muxDECNET
5aal5muxIP
6aal5muxIPX
7aal5muxPPP
8aal5muxVINES
9aal5muxXNS
10aal5nlpid
11aal5snap
12ilmi
13qsaal
 .1.3.6.1.4.1.351.150.9.1.1.1.1.3
cwrChanVirtualTemplate
This object identifies the virtual template.

The non-zero value need to be specified for
Cisco PPP or MUX-type PPP encapsulation
(i.e. cwrChanAalEncapType = aal5ciscoPPP or
aal5muxPPP).

…
Unsigned32r/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.351.150.9.1.1.1.1.4
cwrChanInArpInterval
This specifies how often Inverse ARP datagrams will be sent
on this channel. 0 will disable the InArp for this channel.
This object is only supported for aal5snap encapsulation
(i.e. cwrChanAalEncapType = aal5snap).
minutesUnsigned32r/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.351.150.9.1.1.1.1.5
cwrChanOamLoopbkTxInterval
This specifies how often to generate an OAM F5 loopback cell
from this channel. 0 will disable generation of OAM F5
loopback cells.
secondsUnsigned32r/w
Constraints:
range: 0-600
 .1.3.6.1.4.1.351.150.9.1.1.1.1.6
cwrChanOamManage
This enables/disables OAM management for this channel.
If set to true(1), OAM management is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.351.150.9.1.1.1.1.7
cwrChanOamRetryUpCount
Number of consecutive end-to-end F5 OAM loopback cell
responses that must be received in order to change a PVC
connection state to up.
This object only applies if OAM management is enabled
(i.e. cwrChanOAMManage = true).
Unsigned32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.351.150.9.1.1.1.1.8
cwrChanOamRetryDownCount
Number of consecutive end-to-end F5 OAM loopback cell
responses that are not received in order to change a PVC
connection state to down.
This object only applies if OAM management is enabled
(i.e. cwrChanOAMManage = tru…
Unsigned32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.351.150.9.1.1.1.1.9
cwrChanOamRetryInterval
The frequency that end-to-end F5 OAM loopback cells are
transmitted when a change in UP/DOWN state of a PVC is
being verified.
This object only applies if OAM management is enabled
(i.e. cwrChanOAMManage = true).
secondsUnsigned32r/w
Constraints:
range: 1-1000
 .1.3.6.1.4.1.351.150.9.1.1.1.1.10