x21LineRate

CISCO-WAN-FR-X21-MIB · .1.3.6.1.4.1.351.110.4.5.1.1.1.4

Object

column r/w Enumeration

This variable configures the X.21/HSSI/V.35 line-rate.
Note that enumerations 51 through 108 are supported
only by FRSM-HS2/HS2B card.
              
default is r48Kbps on FRSM-HS2B-12IN1
default is r52Mbps on FRSM-HS2/HS2B-HSSI

Context

MIB: CISCO-WAN-FR-X21-MIB
OID: .1.3.6.1.4.1.351.110.4.5.1.1.1.4
Type: column
Access: readwrite
Status: current
Parent: x21CnfGrpEntry
Table: x21CnfGrpTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	r48Kbps
`2`	r56Kbps
`3`	r64Kbps
`4`	r112Kbps
`5`	r128Kbps
`6`	r168Kbps
`7`	r192Kbps
`8`	r224Kbps
`9`	r256Kbps
`10`	r280Kbps
`11`	r320Kbps
`12`	r336Kbps
`13`	r384Kbps
`14`	r392Kbps
`15`	r448Kbps
`16`	r512Kbps
`17`	r768Kbps
`18`	r1024Kbps
`19`	r1536Kbps
`20`	r1544Kbps
`21`	r1792Kbps
`22`	r1920Kbps
`23`	r1984Kbps
`24`	r2048Kbps
`25`	r3097Kbps
`26`	r3157Kbps
`27`	r4096Kbps
`28`	r4645Kbps
`29`	r4736Kbps
`30`	r6195Kbps
`31`	r6315Kbps
`32`	r7744Kbps
`33`	r7899Kbps
`34`	r8192Kbps
`35`	r9289Kbps
`36`	r9472Kbps
`37`	r10240Kbps
`38`	r10890Kbps
`39`	r11060Kbps
`40`	r12390Kbps
`41`	r12630Kbps
`42`	r13900Kbps
`43`	r14220Kbps
`44`	r14340Kbps
`45`	r15490Kbps
`46`	r15800Kbps
`47`	r16380Kbps
`48`	r20030Kbps
`49`	r24990Kbps
`50`	r52Mbps
`51`	r17370Kbps
`52`	r18950Kbps
`53`	r20530Kbps
`54`	r22100Kbps
`55`	r23680Kbps
`56`	r3088Kbps
`57`	r4632Kbps
`58`	r6176Kbps
`59`	r7720Kbps
`60`	r9264Kbps
`61`	r10808Kbps
`62`	r12352Kbps
`63`	r13896Kbps
`64`	r15440Kbps
`65`	r16984Kbps
`66`	r18528Kbps
`67`	r20072Kbps
`68`	r21616Kbps
`69`	r23160Kbps
`70`	r24704Kbps
`71`	r26248Kbps
`72`	r27792Kbps
`73`	r29336Kbps
`74`	r30880Kbps
`75`	r32424Kbps
`76`	r33968Kbps
`77`	r35512Kbps
`78`	r37056Kbps
`79`	r38600Kbps
`80`	r40144Kbps
`81`	r41688Kbps
`82`	r43232Kbps
`83`	r44776Kbps
`84`	r46320Kbps
`85`	r47864Kbps
`86`	r49408Kbps
`87`	r50952Kbps
`88`	r6144Kbps
`89`	r12288Kbps
`90`	r14336Kbps
`91`	r16384Kbps
`92`	r18432Kbps
`93`	r20480Kbps
`94`	r22528Kbps
`95`	r24576Kbps
`96`	r26624Kbps
`97`	r28672Kbps
`98`	r30720Kbps
`99`	r32768Kbps
`100`	r34816Kbps
`101`	r36864Kbps
`102`	r38912Kbps
`103`	r40960Kbps
`104`	r43008Kbps
`105`	r45056Kbps
`106`	r47104Kbps
`107`	r49152Kbps
`108`	r51200Kbps

Related Objects

Sibling Objects

Object	Type	Syntax	OID
x21LineNum This object is the identifier of a X.21 interface. FRSM-HS2/HS2B-HSSI supports a range from 1 to 2. FRSM-HS2B-12IN1 supports a range from 1 to 8.	column	Integer32	`.1.3.6.1.4.1.351.110.4.5.1.1.1.1`
x21LineInterfaceType This object indicates serial interface type. Default is hssi(1). This object is not is configurable in FRSM-HS2 and FRSM-HS2B-HSSI. It will be set to hssi(1) by …	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.10`
x21ClkFrequencyThreshold This object indicates user configurable percentage of clock frequency, which is used by DTE clock monitoring to declare clock rate out of bound alarm. This object is valid only fo…	column	Integer32	`.1.3.6.1.4.1.351.110.4.5.1.1.1.11`
serialLineRate Line rate for X.21/HSSI/V.35 interfaces in bps. This object is supported only by FRSM-HS2/B card, only multiples of 1000 are accepted. Default is 48Kbps for X.21…	column	Integer32	`.1.3.6.1.4.1.351.110.4.5.1.1.1.12`
serialLineRateVariation This object indicates line rate variation of HSSI/X.21/V.35 DCE interfaces in ppm (parts per million). i.e. clock generated from DCE hardware interface = (serialLineRate +/- (s…	column	Integer32	`.1.3.6.1.4.1.351.110.4.5.1.1.1.13`
x21LineEnable This variable disables, enables or modifies a line 1 - disable 2 - enable 3 - modify Default is enable.	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.2`
x21LineType This variable indicates the type X21 line type. The line-type affects the clock -- the DCE device always provides the clock and DTE accepts it. dteST is only applicable to V.35 in…	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.3`
x21LineLoopbackCommand This variable represents the loopback state x21NoLoop Not in the loopback state. Normal traffic can be sent x21DiagnosticMetallicLoop Loopbacks the line on the back-card tow…	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.5`
x21LineSendCode This variable indicates what type of code is being sent across the X.21/HSSI interface by the device. The values mean: x21NoCode: No loopback. …	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.6`
x21LineLoopbackCodeDetection Enable detection of line Loopback Codes. The loopback detection is implemented only in HSSI DCE mode. Default is codeDetectDisabled.	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.7`
x21ConnectorType back card type This object is not used by FRSM-HS2/HS2B	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.8`
x21InvertClock This object configures two options: a) To invert the clock sent by HS1/HS2B with the TX data or not. b) If DCE,to expect the receive clock looped back from DTE or not. …	column	Enumeration	`.1.3.6.1.4.1.351.110.4.5.1.1.1.9`