x21CnfGrpEntry
CISCO-WAN-FR-X21-MIB ·
.1.3.6.1.4.1.351.110.4.5.1.1.1
Object
row
An entry in the X21 Configuration table.
Context
- MIB
- CISCO-WAN-FR-X21-MIB
- OID
.1.3.6.1.4.1.351.110.4.5.1.1.1- Type
- row
- Status
- current
- Parent
- x21CnfGrpTable
- Table
- x21CnfGrpTable
- Children
- 13
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x21LineNum This object is the identifier of a X.21 interface.
FRSM-HS2/HS2B-HSSI supports a range from 1 to 2.
FRSM-HS2B-12IN1 supports a range from 1 to 8. | column | Integer32 | .1.3.6.1.4.1.351.110.4.5.1.1.1.1 |
| x21LineInterfaceType This object indicates serial interface type.
Default is hssi(1).
This object is not is configurable in FRSM-HS2
and FRSM-HS2B-HSSI. It will be set to hssi(1) by
… | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.10 |
| x21ClkFrequencyThreshold This object indicates user configurable percentage of
clock frequency, which is used by DTE clock monitoring
to declare clock rate out of bound alarm. This object
is valid only fo… | column | Integer32 | .1.3.6.1.4.1.351.110.4.5.1.1.1.11 |
| serialLineRate Line rate for X.21/HSSI/V.35 interfaces
in bps. This object is supported only by
FRSM-HS2/B card, only multiples of
1000 are accepted.
Default is 48Kbps for X.21… | column | Integer32 | .1.3.6.1.4.1.351.110.4.5.1.1.1.12 |
| serialLineRateVariation This object indicates line rate variation of
HSSI/X.21/V.35 DCE interfaces in ppm (parts
per million). i.e. clock generated from DCE hardware
interface = (serialLineRate +/- (s… | column | Integer32 | .1.3.6.1.4.1.351.110.4.5.1.1.1.13 |
| x21LineEnable This variable disables, enables or modifies a line
1 - disable
2 - enable
3 - modify
Default is enable. | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.2 |
| x21LineType This variable indicates the type X21 line type.
The line-type affects the clock -- the DCE device
always provides the clock and DTE accepts it.
dteST is only applicable to V.35 in… | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.3 |
| x21LineRate This variable configures the X.21/HSSI/V.35 line-rate.
Note that enumerations 51 through 108 are supported
only by FRSM-HS2/HS2B card.
default is r48Kbps on FRSM-HS… | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.4 |
| x21LineLoopbackCommand This variable represents the loopback state
x21NoLoop
Not in the loopback state. Normal traffic can be sent
x21DiagnosticMetallicLoop
Loopbacks the line on the back-card tow… | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.5 |
| x21LineSendCode This variable indicates what type of code is
being sent across the X.21/HSSI interface by the
device. The values mean:
x21NoCode: No loopback.
… | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.6 |
| x21LineLoopbackCodeDetection Enable detection of line Loopback Codes.
The loopback detection is implemented only in HSSI
DCE mode.
Default is codeDetectDisabled. | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.7 |
| x21ConnectorType back card type
This object is not used by FRSM-HS2/HS2B | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.8 |
| x21InvertClock This object configures two options:
a) To invert the clock sent by HS1/HS2B with the
TX data or not.
b) If DCE,to expect the receive clock looped back
from DTE or not.
… | column | Enumeration | .1.3.6.1.4.1.351.110.4.5.1.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| x21LineNum This object is the identifier of a X.21 interface.
FRSM-HS2/HS2B-HSSI supports a range from 1 to 2.
FRSM-HS2B-12IN1 supports a range from 1 to 8. | column | Integer32 | .1.3.6.1.4.1.351.110.4.5.1.1.1.1 |