cesPortType

CISCO-WAN-CES-PORT-MIB · .1.3.6.1.4.1.351.110.5.3.1.1.1.1.4

Object

column r/w Enumeration

This object represents port type whether it is
carrying  subrate circuits.
              
structured    : This is  for SDT(Structured Data Transfer).
                This type of port supports following
                features: 
                 * intended to emulate point-to-point
                  fractional DS1 or E1 circuit.
                 * Synchronous timing
                 * Fractional(Nx64 Kbps)DS1/E1 service
                   (Contiguous timeslots only).You can
                   map an Nx64 Kbps channel to any Virtual
                   Channel(VC).
              
unstructured  : This is for unstructured data transfer(UDT)
               All the DS0 time slots are allocated.
               This type of port supports following
               features: 
                * intended to emulate point-to-point
                  DS1 or E1 circuit.
                * Synchronous and Asynchronous timing
              
framingOnVcDisconnect : similar to unstructured during normal
                        operation. In case of channel failure
                        line data will be looped back towards
                        line.
strau          : only one DS0 time slot is allocated.
              
The value strau(4) value is not supported in 
CESM-8T1/E1 or CESM-T3E3.
CESM-T3E3 card supports value unstructured(2) only.

Context

MIB: CISCO-WAN-CES-PORT-MIB
OID: .1.3.6.1.4.1.351.110.5.3.1.1.1.1.4
Type: column
Access: readwrite
Status: current
Parent: cesmPortCnfGrpEntry
Table: cesmPortCnfGrpTable
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	structured
`2`	unstructured
`3`	framingOnVcDisconnect
`4`	strau

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cesPortNum This object identifies the logical port number. The range support depends upon the type of the service module(Card). - 8 port T1 Card, range is 1..192. - 8 port E1 Card, range…	column	Integer32	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.1`
cesPortBERTEnable This variable enables/disables BERT. This object is not supported in CESM-T3E3.	column	Enumeration	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.10`
cesPortRowStatus This variable enables or modifies the port 1 - add : Add a logical port 2 - del : Delete a logical port 3 - mod : Modify a logical port.	column	Enumeration	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.2`
cesPortLineNum This object represents the line number to which this port is associated. The supported range depends upon the type of service module(card).	column	Integer32	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.3`
cesPortDs0ConfigBitMap This represents bit map of DS0s for a line which are used to form this logical port. Bit 0 represents DS0-1.	column	Integer32	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.5`
cesPortNumOfDs0Slot This represents number of DS0 time slots configured to this Port. If the cesPortType is strau(4), then this can not have more than 1 DS0 time slot.	column	Integer32	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.6`
cesPortNumOfSCIPerDS0 This object represents number of subcircuit in the DS0 time slot. This is applicable only when cesPortType is strau(4). 8 = there are 8 no .of 8kbps links (1 …	column	Integer32	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.7`
cesPortSpeed This object identifies the configured speed of port. Max speed for T1 = 1544 Max speed for E1 = 2038 Max speed for T3 = 44736 Max speed for E3 = 34368.	column	kbps Integer32	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.8`
cesPortState This variable indicates the state of the logical port. The possible values are : notConfigured (1) : Port is not configured active (2) : Port is in active state re…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.3.1.1.1.1.9`