CISCO-WAN-CES-PORT-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
cesmPortCnfGrpTable
table.1.3.6.1.4.1.351.110.5.3.1.1.1
·
1 row entry
·
10 columns
The config table is for CES logical port. This is used for configuring the port type and number of DS0s and number of Subcircuits in DS0 on the CES port.
An entry for each logical port. Each entry
contains information on the port type, DS0s
configured and number of DS0 subcircuits.
contains information on the port type, DS0s
configured and number of DS0 subcircuits.
Indexes
cesPortNum
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
cesPortNum
This object identifies the logical port number.
The range support depends upon the type of the service module(Card). - 8 port T1 Card, range is 1..192. - 8 port E1 Card, range is 1..248. - 1 port T3 Card, range is… |
Integer32 Constraints: range: 1-2048 |
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.1 |
||||||||||||||||
|
cesPortRowStatus
This variable enables or modifies the port
1 - add : Add a logical port 2 - del : Delete a logical port 3 - mod : Modify a logical port. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.2 |
||||||||||||||||
|
cesPortLineNum
This object represents the line number to
which this port is associated. The supported range depends upon the type of service module(card). |
Integer32r/w Constraints: range: 1-128 |
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.3 |
||||||||||||||||
|
cesPortType
This object represents port type whether it is
carrying subrate circuits. structured : This is for SDT(Structured Data Transfer). This type of port supports following … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.4 |
||||||||||||||||
|
cesPortDs0ConfigBitMap
This represents bit map of DS0s for a line which
are used to form this logical port. Bit 0 represents DS0-1. |
Integer32r/w Constraints: range: 0-16777215 |
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.5 |
||||||||||||||||
|
cesPortNumOfDs0Slot
This represents number of DS0 time slots
configured to this Port. If the cesPortType is strau(4), then this can not have more than 1 DS0 time slot. |
Integer32r/w Constraints: range: 1-32 |
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.6 |
||||||||||||||||
|
cesPortNumOfSCIPerDS0
This object represents number of subcircuit in
the DS0 time slot. This is applicable only when cesPortType is strau(4). 8 = there are 8 no .of 8kbps links (1 bit) 4 = there are 4 no .of 16kbps lin… |
Integer32r/w Constraints: range: 1-8 |
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.7 |
||||||||||||||||
|
cesPortSpeed
This object identifies the configured speed
of port. Max speed for T1 = 1544 Max speed for E1 = 2038 Max speed for T3 = 44736 Max speed for E3 = 34368. |
kbpsInteger32 Constraints: range: 0-44736 |
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.8 |
||||||||||||||||
|
cesPortState
This variable indicates the state of the
logical port. The possible values are : notConfigured (1) : Port is not configured active (2) : Port is in active state remoteLoopback (3) : Remote Loopback is se… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.9 |
||||||||||||||||
|
cesPortBERTEnable
This variable enables/disables BERT.
This object is not supported in CESM-T3E3. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.351.110.5.3.1.1.1.1.10 |