managementDomainTftpPathname

CISCO-VTP-MIB · .1.3.6.1.4.1.9.9.46.1.2.1.1.9
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The complete pathname of the file at the TFTP Server
identified by the value of managementDomainTftpServer
in/from which VTP VLAN information for this management
domain is to be stored/retrieved.  If the value of
corresponding instance of managementDomainTftpServer is
0.0.0.0, the value of this object is ignored.

Context

MIB
CISCO-VTP-MIB
OID
.1.3.6.1.4.1.9.9.46.1.2.1.1.9
Type
column
Access
readwrite
Status
current
Parent
managementDomainEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VTP-MIB::managementDomainTftpPathname'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-VTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VTP-MIB::managementDomainTftpPathname.<managementDomainIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VTP-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VTP-MIB::managementDomainTftpPathname'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
vtpBasicGroup
Compliance refinements
vtpMIBCompliance10 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance11 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance12 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance13 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance14 readonly
Write access is not required.
vtpMIBCompliance15 readonly
Write access is not required.
vtpMIBCompliance16 readonly
Write access is not required.
vtpMIBCompliance5 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance6 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance7 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance8 readonly
This object is read-only if vtpVersion
is none(3).
vtpMIBCompliance9 readonly
This object is read-only if vtpVersion
is none(3).