vismRudpSessionTransStateTmout

CISCO-VISM-SESSION-MIB · .1.3.6.1.4.1.351.110.5.5.11.3.1.21

Object

column r/w Integer32

This object indicates the number of milliseconds to wait 
for transfer state before an auto reset occurs.The 
value 0 indicates the connection will be auto-reset
immediately and would not be used with redundant links.

Context

MIB: CISCO-VISM-SESSION-MIB
OID: .1.3.6.1.4.1.351.110.5.5.11.3.1.21
Type: column
Access: readwrite
Status: current
Parent: vismRudpSessionCnfEntry
Table: vismRudpSessionCnfTable
Siblings: 22

Syntax

Integer32

Values & Constraints

Object Constraints

range: 0-65535

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vismRudpSessionNum An arbitrary index that uniquely identifies a session.	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.1`
vismRudpSessionRmtPort The port number of MGC for this session. It can be modified after creation. This port number should be unique across other sessions and XGCP/SRCP.	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.10`
vismRudpSessionMaxWindow This object is the maximum number of segments that should be sent without getting an acknowledgment, i.e. the maximum size of the receive window in segments. This is used for fl…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.11`
vismRudpSessionSyncAttempts Maximum number of attempts to synchronize with other side (MGC). This object can be modified after a session is created.	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.12`
vismRudpSessionMaxSegSize The maximum number of octets that can be received by the peer sending the SYN segment.	column	bytes Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.13`
vismRudpSessionMaxAutoReset The maximum number of consecutive auto reset that will be performed before a connection is reset. A value 0 indicates that an auto reset will not be attempted, the connection w…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.14`
vismRudpSessionRetransTmout The timeout value for retransmission of unacknowledged packets. This is a negotiable parameter, MGC and GW must agree on the same value for this parameter.	column	milliseconds Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.15`
vismRudpSessionMaxRetrans The maximum number of times consecutive retransmission will be attempted before the connection is considered broken. A value 0 indicates retransmission should be attempted for…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.16`
vismRudpSessionMaxCumAck This object indicates the maximum number of acknowledgments that will be accumulated before sending an acknowledgment. A value of 0 indicates an acknowledgment segment will be se…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.17`
vismRudpSessionCumAckTmout This object is the timeout value for sending an acknowledgment segment. This value is specified in milliseconds. This parameter should be smaller than vismRudpSessionRetransTmout…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.18`
vismRudpSessionMaxOutOfSeq This object is the maximum number of out of sequence packets that will be accumulated before an EACK(Extended acknowledgement) segment is sent. The EACK segment is used to acknow…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.19`
vismRudpSessionGrpNum This indicates the session group that this session belongs to. Once the entry is created, it cannot be modified.	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.2`
vismRudpSessionNullSegTmout This object specifies the session idle timeout. When the session idle time reaches this idle timeout value, a null segment will be sent to MGC from this GW. segments. This is a ne…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.20`
vismRudpSessionType This object indicates if the session is configured for Trunking or PRI Backhaul. By default the object is set to 'backhaul' and it needs to set to 'lapdTrunking' if LAPD Trunki…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.5.11.3.1.22`
vismRudpSessionRmtGwIp This is the IP address of the remote GW. This will be used only for 'lapdTrunking' applications and the vismRudpSessionType must be set to LAPD Trunking.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.351.110.5.5.11.3.1.23`
vismRudpSessionCnfRowStatus This variable allows the user to add or delete the entry for this table. 'createAndGo': Use this to add a RUDP session in this table. RUDP vismRudpSessionNum, vismRudpSessionGrpN…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.5.11.3.1.3`
vismRudpSessionPriority This object specifies the RUDP session priority for this session. Once a session has been added it can not be modified. When a session fails it indicates which session the sessio…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.4`
vismRudpSessionState This object indicates the current session operational state. The possible operational states are as follows: 'oos': Out of service state. This is the initial state …	column	Enumeration	`.1.3.6.1.4.1.351.110.5.5.11.3.1.5`
vismRudpSessionCurrSession This object indicates which session has got active message from MGC. The session manager will always try to bring the first added session to active. If the current …	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.6`
vismRudpSessionLocalIp The IP address of XGCP gateway.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.351.110.5.5.11.3.1.7`
vismRudpSessionLocalPort The port number of XGCP gateway for this session. It can be modified after creation. This port number should be unique across other sessions and XGCP/SRCP(Simple Resource Coordin…	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.11.3.1.8`
vismRudpSessionRmtIp This is the IP address of the MGC. It is resolved by using vismSessionGrpMgcName in vismSessionGrpTable.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.351.110.5.5.11.3.1.9`