CISCO-VISM-SESSION-MIB
The MIB module contain the RUDP session parameter.
The relationship between session set, session group and RUDP
session is that: For fault tolerant case each session set
contains two groups. Each group connects to one MGC(Media
Gateway Controller), One active, one standby. If one MGC
fails, the other MGC will inform the session mamager to
switch over. If the set configuration is non-fault tolerant,
each set contains one group.
Each session group contains upto four RUDP sessions.
Session set is explicitly created first, then session group
can be created in this set. After session group is
created, session can be created in the group.
For deletion, session has to be deleted first. However, the
last session can not be deleted if there is still LAPD(Link
Access Procedure on the D-channel) entry. A group can only
be deleted if there is no more session in it. Session set
will be deleted when the last group in the set has been
deleted.
- Source file
CISCO-VISM-SESSION-MIB- Last revised
- Identity
ciscoVismSessionMIB- Base OID
1.3.6.1.4.1.351.150.95
Imported Objects
| BASIS-MIB | voice |
| CISCOWAN-SMI | ciscoWan |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | DisplayString TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VISM-SESSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VISM-SESSION-MIB::ciscoVismSessionMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VISM-SESSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VISM-SESSION-MIB::ciscoVismSessionMIB'
Objects (66)
Showing 66 of 66 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.351.110.5.5.11 |
||
.1.3.6.1.4.1.351.110.5.5.11.1 |
||
.1.3.6.1.4.1.351.110.5.5.11.1.1 |
||
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.1.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.1.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.1.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.1.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.1.1.5 |
|
.1.3.6.1.4.1.351.110.5.5.11.1.1.6 |
||
.1.3.6.1.4.1.351.110.5.5.11.1.1.7 |
||
.1.3.6.1.4.1.351.110.5.5.11.1.1.8 |
||
.1.3.6.1.4.1.351.110.5.5.11.2 |
||
.1.3.6.1.4.1.351.110.5.5.11.2.1 |
||
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.3 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.4 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.5 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.6 |
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.7 |
||
.1.3.6.1.4.1.351.110.5.5.11.2.1.8 |
||
|
OctetString
|
.1.3.6.1.4.1.351.110.5.5.11.2.1.9 |
|
.1.3.6.1.4.1.351.110.5.5.11.3 |
||
.1.3.6.1.4.1.351.110.5.5.11.3.1 |
||
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.1 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.10 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.11 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.12 |
|
|
bytesInteger32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.13 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.14 |
|
|
millisecondsInteger32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.15 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.16 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.17 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.18 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.19 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.2 |
|
|
millisecondsInteger32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.20 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.21 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.22 |
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.23 |
||
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.3 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.4 |
|
|
Enumeration
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.5 |
|
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.6 |
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.7 |
||
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.8 |
|
.1.3.6.1.4.1.351.110.5.5.11.3.1.9 |
||
.1.3.6.1.4.1.351.110.5.5.11.4 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1 |
||
|
Integer32
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.1 |
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.10 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1.11 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1.12 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1.13 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1.2 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1.3 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.4 |
|
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.5 |
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.6 |
||
|
packetsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.7 |
|
.1.3.6.1.4.1.351.110.5.5.11.4.1.8 |
||
.1.3.6.1.4.1.351.110.5.5.11.4.1.9 |
||
.1.3.6.1.4.1.351.150.95 |
||
.1.3.6.1.4.1.351.150.95.2 |
||
.1.3.6.1.4.1.351.150.95.2.1 |
||
.1.3.6.1.4.1.351.150.95.2.2 |
Dependencies (5) 5 direct Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CISCOWAN-SMIcisco
- BASIS-MIBcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- CISCO-VISM-SESSION-MIBciscoselected
Conformance Groups (4)
Compliance Statements (1)
OID
.1.3.6.1.4.1.351.150.95.2.2.1The compliance statement for objects related
to CISCO-VISM-SESSION-MIB.
to CISCO-VISM-SESSION-MIB.
Required groups
| mandatory | ciscoVismSessionSetGrp | |
| mandatory | ciscoVismSessionGrp | |
| mandatory | ciscoVismRudpSessionGrp | |
| mandatory | ciscoVismRudpSessionStatGrp |