ds0SeizedCode

CISCO-VISM-DSX0-MIB · .1.3.6.1.4.1.351.110.4.7.1.1.4
Commands MIB view Table view

Object

column r/w Integer32 
This object contains the code transmitted in the
ABCD bits when the ds0 is connected and
ds0TransmitCodesEnable is enabled.  The object is
a bitmap and the various bit positions are:
   Bit 0 (value 1)     D bit
   Bit 1 (value 2)     C bit
   Bit 2 (value 4)     B bit
   Bit 3 (value 8)     A bit
	This object is useful for ds0 conditioning to be
	done if an alarm condition is detected from the
	network side. DS0 conditioning is implemented in
the trunking application only.
              
This object is not applicable in the CAS backhaul
	application.
              
From vism 2.0.3 release onwards this object can
be configured in any mode, but will be applicable
only in trunking application and will be ignored
in other applications.

Context

MIB
CISCO-VISM-DSX0-MIB
OID
.1.3.6.1.4.1.351.110.4.7.1.1.4
Type
column
Access
readwrite
Status
current
Parent
dsx0VismCnfEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VISM-DSX0-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VISM-DSX0-MIB::ds0SeizedCode'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-VISM-DSX0-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VISM-DSX0-MIB::ds0SeizedCode.<ds0IfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VISM-DSX0-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VISM-DSX0-MIB::ds0SeizedCode'

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-15

Conformance

Member of
ciscoVismDsx0ConfGroup ciscoVismDsx0ConfGroup2