ds0CasWinkBreakTime

CISCO-VISM-DSX0-MIB · .1.3.6.1.4.1.351.110.4.7.1.1.20
Commands MIB view Table view

Object

column r/w millisecondsInteger32 
The wink consists of off-hook A-B bit pattern,
followed by on-hook A-B bit pattern in timed sequence.
This object indicates the minimum duration for which 
the on-hook part of wink signal should persist.
              
This object cannot be configured if the signaling
type for the line to which this ds0 belongs is non cas.
For a cas line this object CAN only be configured
only after associating this ds0 with an endpoint
              
This object will be applicable if ds0CasParameterSource         
has a value of mibValue (2).
The allowed range for this object is 10..1000.

Context

MIB
CISCO-VISM-DSX0-MIB
OID
.1.3.6.1.4.1.351.110.4.7.1.1.20
Type
column
Access
readwrite
Status
current
Units
milliseconds
Parent
dsx0VismCnfEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-VISM-DSX0-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-VISM-DSX0-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime.<ds0IfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-VISM-DSX0-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-VISM-DSX0-MIB::ds0CasWinkBreakTime'

Syntax

millisecondsInteger32

Values & Constraints

Object Constraints
range: 0-65535

Conformance

Member of
ciscoVismDsx0ConfGroup ciscoVismDsx0ConfGroup2