tn3270sPuGenericPool
CISCO-TN3270SERVER-MIB ·
.1.3.6.1.4.1.9.9.54.1.3.1.1.7
Object
column
Enumeration
This variable indicates whether or not leftover LUs
will be made available to tn3270 sessions which
do not request a specific LU or LU pool.
A 'leftover' LU is defined as one for which all of
the following conditions hold true:
.the SSCP did not send an ACTLU during PU startup; and
.the PU controlling the LU is capable of carrying PSID
vectors on NMVT messages (thus allowing DDDLU
operation for that LU).
inherit indicates that the value of tn3270sPuGenericPool is
to be the same as tn3270sGlobalGenericPool.
deny indicates that the leftover LUs should not be given
to a generic pool (ie, the PU is not automatically
fully populated with 255 LOCADDR definitions);
permit indicates leftover LUs should be made available to
tn3270 users wanting 'generic' sessions. All LUs in the
generic pool are (by definition) DDDLU capable.
Context
- MIB
- CISCO-TN3270SERVER-MIB
- OID
.1.3.6.1.4.1.9.9.54.1.3.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- tn3270sPuEntry
- Table
- tn3270sPuTable
- Siblings
- 16
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | permit |
2 | deny |
3 | inherit |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tn3270sPuIndex Index used to uniquely identify each Node instance. This
is the same as snaNodeAdminIndex in the NAU MIB. | column | Tn3270sPUIndex | .1.3.6.1.4.1.9.9.54.1.3.1.1.1 |
| tn3270sPuLuSeed For Direct PU this defines the LU name prefix (LU seed)
which is concatinated with the locaddr to form a unique
name. | column | OctetString | .1.3.6.1.4.1.9.9.54.1.3.1.1.10 |
| tn3270sLocalSapAddress SAP address of the local direct node. | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.11 |
| tn3270sRemoteSapAddress SAP address of the remote node; valid for direct PU only. | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.12 |
| tn3270sRemoteMacAddress MAC address of the remote node; valid for direct PU only. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.54.1.3.1.1.13 |
| tn3270sPuIpPrecedenceScreen The value of the PRECEDENCE field in the Type of
Service octet in the IP header set by the TN3270
server for outbound IP packets destined to the TN3270
client screen. That is fro… | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.14 |
| tn3270sPuIpPrecedencePrinter The value of the PRECEDENCE field in the Type of
Service octet in the IP header set by the TN3270
server for outbound IP packets destined to the TN3270
client printer. That is fr… | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.15 |
| tn3270sPuIpTosScreen The value of the TOS field in the Type of Service
octet in the IP header set by the TN3270 server
for outbound IP packets destined to the TN3270
client screen. That is from the ro… | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.16 |
| tn3270sPuIpTosPrinter The value of the TOS field in the Type of Service
octet in the IP header set by the TN3270 server
for outbound IP packets destined to the TN3270
client printer. That is from the r… | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.17 |
| tn3270sPuIpAddr The ip address of this TN3270 server. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.54.1.3.1.1.2 |
| tn3270sPuTcpPort The TCP port of this TN3270 server telnet session. | column | Tn3270sTCPPort | .1.3.6.1.4.1.9.9.54.1.3.1.1.3 |
| tn3270sPuIdleTimeout The number of seconds of LU inactivity (from either
host or client) before the TN3270 session is
disconnected. Zero seconds means that LU sessions,
by default, will not be disconn… | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.4 |
| tn3270sPuKeepAlive The number of seconds of inactivity from client side
which the TN3270 Server allows to elapse before
sending DO-TIMING-MARK to the TN3270 client. If the
client does not reply with… | column | Integer32 | .1.3.6.1.4.1.9.9.54.1.3.1.1.5 |
| tn3270sPuUnbindAction This variable indicates whether or not a tn3270 session
will be disconnected upon UNBIND.
keep indicates that no automatic disconnect will be made by
the server u… | column | Enumeration | .1.3.6.1.4.1.9.9.54.1.3.1.1.6 |
| tn3270sPuState The value identifies the current PU state. This has
a different meaning for direct or DLUR PU before the
link station is established.
For DLUR PU, the PU is in reset state, for d… | column | Enumeration | .1.3.6.1.4.1.9.9.54.1.3.1.1.8 |
| tn3270sPuType This defines whether the connection to the host is
via DLUR or direct link. If DLUR, LuSeed, lmac/sap,
and rmac/sap in this table are undefined. | column | Enumeration | .1.3.6.1.4.1.9.9.54.1.3.1.1.9 |