CISCO-TN3270SERVER-MIB Table View

A list of TN3270 server and DLUR global information.

tn3270sGlobalEntry row .1.3.6.1.4.1.9.9.54.1.1.1.1

Parameters values for a group.

Indexes

tn3270sIndex

Column	Syntax	OID
tn3270sIndex Index used to uniquely identify each tn3270 server instance. This index value shall not be reused when the server is shut down and a new instance invoked.	Tn3270sUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.1.1.1.1
tn3270sCpuCard The identity of the board running the server.	Tn3270sCpuCard Type Constraints: range: 10..16	.1.3.6.1.4.1.9.9.54.1.1.1.1.2
tn3270sMaxLus The maximum number of LUs supported by the server.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.54.1.1.1.1.3
tn3270sLusInUse The number of LUs currently in use on the server.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.54.1.1.1.1.4
tn3270sStartupTime The timestamp when the tn3270 server started.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.54.1.1.1.1.5
tn3270sGlobalTcpPort The default TCP port of this TN3270 Server, which is inherited by the PU if it doesn't have the TCP port explicitly defined in the router configuration for this PU.	Tn3270sTCPPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.54.1.1.1.1.6
tn3270sGlobalIdleTimeout The number of seconds of LU inactivity (from either host or client) before the TN3270 session is disconnected. Zero seconds means that LU sessions, by default, will not be disconnected when inactive, regardless of the …	secondsInteger32 Constraints: range: 0-65534	.1.3.6.1.4.1.9.9.54.1.1.1.1.7
tn3270sGlobalKeepAlive The number of seconds of inactivity from client side which the TN3270 Server allows to elapse before sending DO-TIMING-MARK to the TN3270 client. If the client does not reply within thirty minutes of such a TIMING-MARK…	secondsInteger32 Constraints: range: 0-65534	.1.3.6.1.4.1.9.9.54.1.1.1.1.8
tn3270sGlobalUnbindAction This variable indicates whether or not a tn3270 session will be disconnected upon UNBIND. keep indicates that no automatic disconnect will be made by the server upon receipt of an UNBIND. …	Enumeration Enumerated Values: 1 keep 2 disconnect	.1.3.6.1.4.1.9.9.54.1.1.1.1.9
tn3270sGlobalGenericPool This variable indicates whether or not leftover LUs will be made available to tn3270 sessions which do not request a specific LU or LU pool. A 'leftover' LU is defined as one for which all of the follow…	Enumeration Enumerated Values: 1 permit 2 deny	.1.3.6.1.4.1.9.9.54.1.1.1.1.10
tn3270sTimingMarkSupported This variable indicates whether to send a timing mark to solicit a response before sending a response to the host. true indicates that a timing mark is sent, false indicates that it is not sent. By using…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.54.1.1.1.1.11
tn3270sRunningTime Total time elapsed since start of tn3270 server.	secondsTn3270sUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.1.1.1.12

A list of statistics for each TN3270 Server Listening 
IP/Port pair.

tn3270sStatsEntry row .1.3.6.1.4.1.9.9.54.1.2.1.1

The entry contains parameters which describe the
statistics of the ip stacks.

Indexes

tn3270sIndex tn3270sStatsServerAddr tn3270sStatsServerTcpPort

Column	Syntax	OID
tn3270sStatsServerAddr The ip address of this TN3270 Server Listen endpoint.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.2.1.1.1
tn3270sStatsServerTcpPort The TCP port in this TN3270 Server Listen endpoint.	Tn3270sTCPPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.54.1.2.1.1.2
tn3270sStatsMaxSess Number of Tn3270 sessions configured which are available to be used by tn3270 clients.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.3
tn3270sStatsSpareSess Spare number of TN3270 sessions available for connect at query time.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.4
tn3270sStatsConnectsIn Total number of TN3270 session connects-in received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.5
tn3270sStatsDisconnects Total number of TN3270 sessions disconnected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.6
tn3270sStatsTN3270ConnectsFailed Total number of attempted sessions which failed to negotiate TN3270/E or were rejected by control point.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.7
tn3270sStatsInboundChains Total number of inbound(from client to host) RU chains (identified by end of record (EOR)) processed. Since every inbound RU chain is accompanied by client giving host the direction(CD), it is also a count of number …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.8
tn3270sStatsOutboundChains Total number of Outbound(from host to client) RU Chains (identified by EOR) processed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.9
tn3270sStatsSampledHostResponses Total number of Sampled Inbound Transactions (identified by EOR) on which response time is computed since restart of last listen on ServerAddress/TcpPort. Counters get reset at that point.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.10
tn3270sStatsNetSampledHostResponseTime Total response time for all sampled inbound transactions for which response time is computed. Response time is the time difference between receiving EOR from the client, and receiving the response from the host. Note t…	10millisecondsTn3270sUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.11
tn3270sStatsSampledClientResponses Total number of sampled outbound timing marks on which response time computed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.12
tn3270sStatsNetSampledClientResponseTime Total response time for all sampled timing marks on which response time is computed. Response time is the time diference between sending the timeing mark to the client and receiving the response from the client. Note t…	10millisecondsTn3270sUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.54.1.2.1.1.13

This table contains objects which describe the PU
configuration parameters not defined in the
NAU mib, APPN mib or DLUR mib

tn3270sPuEntry row .1.3.6.1.4.1.9.9.54.1.3.1.1

A list of TN3270 server PU parameters

Indexes

tn3270sIndex tn3270sPuIndex

Column	Syntax	OID
tn3270sPuIndex Index used to uniquely identify each Node instance. This is the same as snaNodeAdminIndex in the NAU MIB.	Tn3270sPUIndex	.1.3.6.1.4.1.9.9.54.1.3.1.1.1
tn3270sPuIpAddr The ip address of this TN3270 server.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.3.1.1.2
tn3270sPuTcpPort The TCP port of this TN3270 server telnet session.	Tn3270sTCPPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.54.1.3.1.1.3
tn3270sPuIdleTimeout The number of seconds of LU inactivity (from either host or client) before the TN3270 session is disconnected. Zero seconds means that LU sessions, by default, will not be disconnected when inactive, regardless of the a…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.54.1.3.1.1.4
tn3270sPuKeepAlive The number of seconds of inactivity from client side which the TN3270 Server allows to elapse before sending DO-TIMING-MARK to the TN3270 client. If the client does not reply within thirty minutes of such a TIMING-MARK …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.54.1.3.1.1.5
tn3270sPuUnbindAction This variable indicates whether or not a tn3270 session will be disconnected upon UNBIND. keep indicates that no automatic disconnect will be made by the server upon receipt of an UNBIND. …	Enumeration Enumerated Values: 1 keep 2 disconnect 3 inherit	.1.3.6.1.4.1.9.9.54.1.3.1.1.6
tn3270sPuGenericPool This variable indicates whether or not leftover LUs will be made available to tn3270 sessions which do not request a specific LU or LU pool. A 'leftover' LU is defined as one for which all of the followin…	Enumeration Enumerated Values: 1 permit 2 deny 3 inherit	.1.3.6.1.4.1.9.9.54.1.3.1.1.7
tn3270sPuState The value identifies the current PU state. This has a different meaning for direct or DLUR PU before the link station is established. For DLUR PU, the PU is in reset state, for direct PU, this will be either sending a…	Enumeration Enumerated Values: 1 shut 2 reset 3 inactive 4 test 5 xid 6 pActpu 7 active 8 actBusy	.1.3.6.1.4.1.9.9.54.1.3.1.1.8
tn3270sPuType This defines whether the connection to the host is via DLUR or direct link. If DLUR, LuSeed, lmac/sap, and rmac/sap in this table are undefined.	Enumeration Enumerated Values: 1 dlur 2 direct	.1.3.6.1.4.1.9.9.54.1.3.1.1.9
tn3270sPuLuSeed For Direct PU this defines the LU name prefix (LU seed) which is concatinated with the locaddr to form a unique name.	OctetString Constraints: range: 1-6	.1.3.6.1.4.1.9.9.54.1.3.1.1.10
tn3270sLocalSapAddress SAP address of the local direct node.	Integer32 Constraints: range: 1-254	.1.3.6.1.4.1.9.9.54.1.3.1.1.11
tn3270sRemoteSapAddress SAP address of the remote node; valid for direct PU only.	Integer32 Constraints: range: 1-254	.1.3.6.1.4.1.9.9.54.1.3.1.1.12
tn3270sRemoteMacAddress MAC address of the remote node; valid for direct PU only.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.54.1.3.1.1.13
tn3270sPuIpPrecedenceScreen The value of the PRECEDENCE field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client screen. That is from the router to the TN3270 client screen.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.54.1.3.1.1.14
tn3270sPuIpPrecedencePrinter The value of the PRECEDENCE field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client printer. That is from the router to the TN3270 client print…	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.9.9.54.1.3.1.1.15
tn3270sPuIpTosScreen The value of the TOS field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client screen. That is from the router to the TN3270 client screen.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.9.9.54.1.3.1.1.16
tn3270sPuIpTosPrinter The value of the TOS field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client printer. That is from the router to the TN3270 client printer.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.9.9.54.1.3.1.1.17

A list of IP to LU mapping entries

tn3270sIpEntry row .1.3.6.1.4.1.9.9.54.1.4.1.1

A list of entries to relate a client IP address to the
LU

Indexes

tn3270sIndex tn3270sIpClientAddr tn3270sIpClientTcpPort

Column	Syntax	OID
tn3270sIpClientAddr The ip address of the TN3270 client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.4.1.1.1
tn3270sIpClientTcpPort The TCP port of the TN3270 client.	Tn3270sTCPPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.54.1.4.1.1.2
tn3270sIpPuIndex The PU index associated with NAU and PU objects	Tn3270sPUIndex	.1.3.6.1.4.1.9.9.54.1.4.1.1.3
tn3270sIpLuIndex The LU index associated with NAU and LU objects.	Tn3270sLUIndex	.1.3.6.1.4.1.9.9.54.1.4.1.1.4

This helps map LU to client ip/port. Also it provides
other useful parameters not available elsewhere.

tn3270sLuEntry row .1.3.6.1.4.1.9.9.54.1.5.1.1

Parameters values for a group.

Indexes

tn3270sIndex tn3270sLuPuIndex tn3270sLuIndex

Column	Syntax	OID
tn3270sLuPuIndex Index used to uniquely identify each PU instance. This is the same as snaNodeAdminIndex in the NAU MIB.	Tn3270sPUIndex	.1.3.6.1.4.1.9.9.54.1.5.1.1.1
tn3270sLuIndex Index used to uniquely identify the LU instance within a PU. It is the locaddr. This is the same as snaLuAdminLuIndex in the NAU MIB.	Tn3270sLUIndex	.1.3.6.1.4.1.9.9.54.1.5.1.1.2
tn3270sLuClientAddr The ip address of the TN3270 client connected to this LU.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.5.1.1.3
tn3270sLuClientTcpPort The TCP port of the TN3270 client connected to this LU.	Tn3270sTCPPort Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.54.1.5.1.1.4
tn3270sLuTelnetType This indicates whether the negotiated TN3270 session. TN3270, TN3270E or never connected.	Enumeration Enumerated Values: 1 tn3270 2 tn3270e 3 neverConnect	.1.3.6.1.4.1.9.9.54.1.5.1.1.5
tn3270sLuTermModel Terminal type or model number of the incoming TN3270 client.	OctetString Constraints: range: 1-17	.1.3.6.1.4.1.9.9.54.1.5.1.1.6
tn3270sLuState The value identifies the current LU state. inactive (1) - LU didn't receive ACTLU. active (2) - LU received ACTLU and acknowledged positively. pSdt (3) - LU is bound but there is n…	Enumeration Enumerated Values: 1 inactive 2 active 3 pSdt 4 actSession 5 pActlu 6 pNotifyAv 7 pNotifyUa 8 pReset 9 pPsid 10 pBind 11 pUnbind 12 unbindWt 13 sdtWt	.1.3.6.1.4.1.9.9.54.1.5.1.1.7
tn3270sLuCurInbPacing The number of inbound frames allowed to be sent to the host without receiving a pacing response from the host.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.9.9.54.1.5.1.1.8
tn3270sLuCurInbQsize After inbound pacing credit is exhausted, the inbound data is queued. This is the number of inbound frames queued waiting for host pacing response.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.9.9.54.1.5.1.1.9
tn3270sLuCurOutQsize The number of TCP packets in the server queued for transmission to the client	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.9.9.54.1.5.1.1.10
tn3270sLuIdleTime Time since last activity was recorded on this LU.	secondsInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.54.1.5.1.1.11
tn3270sLuType This indicates whether LU is dynamic or static. dynamic (1) - LU is configured as DDDLU. static (2) - LU is configured as specific. Host will send ACTLU as soon as PU is active.	Enumeration Enumerated Values: 1 dynamic 2 static	.1.3.6.1.4.1.9.9.54.1.5.1.1.12
tn3270sLuAppnLinkIndex This is the link index into APPN mib for link on which bind flowed; only valid for DLUR LU.	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.9.9.54.1.5.1.1.13
tn3270sLuLfsid This is the session identifier on a PU 2.1 link.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.54.1.5.1.1.14
tn3270sLuLastEventobsolete Time at which the last data was logged for this LU.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.54.1.5.1.1.15
tn3270sLuEvents An array of octets indicating the latest events which happened in this LU. Octet 1 is the most recent event, octet 2 the next most recent and so on. Although the maximum number of events kept is 16, the actual number of…	OctetString Constraints: range: 0-16	.1.3.6.1.4.1.9.9.54.1.5.1.1.16
tn3270sLuNail This variable indicates whether this LU has been configured (Nailed) for a specific TN3270 client. TRUE -> LU is nailed to the client IP address FALSE -> LU is not nailed to the client IP address	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.54.1.5.1.1.17

A list of reserved LUs and their associated IP
addresses is represented here for the containing
PU. Each LU is configured for a specific client
IP address. This association between the LU and
the client IP Address is called nailing. The client
is said to be nailed to its LU and visa-versa.
           
If the client IP address is known but the PU index
is not known, a more efficient way to access
this info is via tn3270sIpNailTable.

tn3270sPuNailEntry row .1.3.6.1.4.1.9.9.54.1.6.1.1

A list of entries to relate a PU to nailed
clients.This table contains the same info as
tn3270sIpNailTable. The indices are ordered to
facilitate access to the information when the
PU index is known but not the client I…

Indexes

tn3270sIndex tn3270sPuIndex tn3270sPuNailClientIpAddr tn3270sPuNailLuFirst

Column	Syntax	OID
tn3270sPuNailClientIpAddr The IP address of the nailed TN3270 client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.6.1.1.1
tn3270sPuNailClientIpMask The subnet mask of the nailed TN3270 client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.6.1.1.2
tn3270sPuNailType The nailing type configured for the range of LUs within this PU is either screen or printer. screen - The range of LUs will only be connected to TN3270 clients with a device type which is not 32…	Enumeration Enumerated Values: 1 screen 2 printer	.1.3.6.1.4.1.9.9.54.1.6.1.1.3
tn3270sPuNailLuFirst The first LU in this range nailed to this client ip address.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.54.1.6.1.1.4
tn3270sPuNailLuLast The last LU in this range nailed to this client ip address.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.54.1.6.1.1.5

A list of reserved LUs and their associated IP
addresses is represented here for the containing
PU. Each LU is configured for a specific client
IP address. This association between the LU and
the client IP Address is called nailing. The client
is said to be nailed to its LU and visa-versa.
          
If the PU index is known but the client IP address
is not known, a more efficient way to access
this info is via tn3270sPuNailTable.

tn3270sIpNailEntry row .1.3.6.1.4.1.9.9.54.1.7.1.1

A list of entries to relate a PU to nailed
clients. This table contains the same info as
tn3270sPuNailTable. The indices are ordered to
facilitate access to the info when the client
IP address is known but not the PU in…

Indexes

tn3270sIndex tn3270sIpNailClientIpAddr tn3270sPuIndex tn3270sIpNailLuFirst

Column	Syntax	OID
tn3270sIpNailClientIpAddr The IP address of the nailed TN3270 client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.7.1.1.1
tn3270sIpNailClientIpMask The subnet mask of the nailed TN3270 client.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.9.54.1.7.1.1.2
tn3270sIpNailType The nailing type configured for the range of LUs within this PU is either screen or printer. screen - The range of LUs will only be connected to TN3270 clients with a device type which is not 328…	Enumeration Enumerated Values: 1 screen 2 printer	.1.3.6.1.4.1.9.9.54.1.7.1.1.3
tn3270sIpNailLuFirst The first LU in this range nailed to this client ip address.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.54.1.7.1.1.4
tn3270sIpNailLuLast The last LU in this range nailed to this client ip address.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.9.9.54.1.7.1.1.5