cseFlowMcastQueryMvrf
CISCO-SWITCH-ENGINE-MIB ·
.1.3.6.1.4.1.9.9.97.1.2.12.1.13
Object
The human-readable name of the Multicast Virtual Private Network (MVPN) routing/forwarding instance (MVRF). When the 'mvrf' bit of cseFlowMcastQueryMask object in the same row is on, an appropriate value should be specified and only flows with the specified MVRF name will be contained in the result table. If the 'mvrf' bit in the associated cseFlowMcastQueryMask is cleared, this object is ignored during the query, and all the flows corresponding to the default MVRF will be considered.
Context
- MIB
- CISCO-SWITCH-ENGINE-MIB
- OID
.1.3.6.1.4.1.9.9.97.1.2.12.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cseFlowMcastQueryEntry
- Table
- cseFlowMcastQueryTable
- Siblings
- 15
Syntax
MPLS-VPN-MIBMplsVpnId
- Source
- MPLS-VPN-MIBMplsVpnId
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cseFlowMcastQueryIndex An arbitrary integer in the range of 1 to
cseFlowMcastMaxQueries to identify this control query. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.97.1.2.12.1.1 |
| cseFlowMcastQueryRows Indicating the status of the query by following values:
-1 - Either the query has not been started or the
agent is still processing this query instance.
It is the defaul… | column | Integer32 | .1.3.6.1.4.1.9.9.97.1.2.12.1.10 |
| cseFlowMcastQueryStatus The status object used to manage rows in this table.
When set to 'active', the query of flows is initiated.
This object can be set to active only after all the
appropriate objects… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.97.1.2.12.1.11 |
| cseFlowMcastQueryCreateTime Time when this query was last set to active. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.97.1.2.12.1.12 |
| cseFlowMcastQueryAddrType The Internet address type for this multicast search
query. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.97.1.2.12.1.14 |
| cseFlowMcastQuerySource The source Internet address of the IP multicast layer 3
flows. When the 'sourceip' bit of cseFlowMcastQueryMask
cseFlowMcastQueryMask object in the same row is on,
an appropriate … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.97.1.2.12.1.15 |
| cseFlowMcastQueryGroup The multicast group Internet address of the queried flows.
When the 'mvrf' bit of cseFlowMcastQueryMask object
in the same row is on, an appropriate value should be
specified an… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.97.1.2.12.1.16 |
| cseFlowMcastQueryMask This object is used to set up the query criterion for
the multicast flows of interest. If any one of the
defined BITs is set, then the value of the corresponding
object in the sa… | column | Bits | .1.3.6.1.4.1.9.9.97.1.2.12.1.2 |
| cseFlowMcastQuerySrc deprecated The source address of the IP multicast layer 3 flows.
This object should be instantiated and assigned a
proper IP address whenever the 'source' bit of
cseFlowMcastQueryMask object… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.97.1.2.12.1.3 |
| cseFlowMcastQueryGrp deprecated The IP multicast group address of the queried flows.
This object should be instantiated and set whenever
the 'group' bit of the associated cseFlowMcastQueryMask object
is on.
If t… | column | McastGroupIp | .1.3.6.1.4.1.9.9.97.1.2.12.1.4 |
| cseFlowMcastQuerySrcVlan The source Vlan ID of the IP multicast layer 3 flows.
This object should be instantiated and set whenever
the 'vlan' bit of the associated cseFlowMcastQueryMask object
is on.
If t… | column | CISCO-VTP-MIBVlanIndex | .1.3.6.1.4.1.9.9.97.1.2.12.1.5 |
| cseFlowMcastQueryRtrIndex Index of the router for which the multicast flows are
available, that is the flows would be replicated
and routed by the specified
router, should the flows did not get switched.
T… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.97.1.2.12.1.6 |
| cseFlowMcastQuerySkipNFlows The number of searched flows to be skipped before storing
any multicast flows in cseFlowMcastResultTable.
This object can be used along with cseFlowMcastQueryTotalFlows
object to … | column | Integer32 | .1.3.6.1.4.1.9.9.97.1.2.12.1.7 |
| cseFlowMcastQueryOwner The manager entity that configured this entry and is therefore
using the resources assigned to it. It is used to model an
administratively assigned name of the owner of a resourc… | column | IF-MIBOwnerString | .1.3.6.1.4.1.9.9.97.1.2.12.1.8 |
| cseFlowMcastQueryTotalFlows The number of flows matching the query criterion. | column | Integer32 | .1.3.6.1.4.1.9.9.97.1.2.12.1.9 |