csConfigLoopbackType

CISCO-SONET-MIB · .1.3.6.1.4.1.9.9.126.1.1.1.1.1

Object

column r/w Enumeration

This object specifies the desired loopback mode
configuration of the SONET line.
The possible values of this objects are follows:
              
noLoopback :  
        Not in the loopback state.  
lineLocal : 
        The signal transmitted from this interface
        is connected to the associated incoming
        receiver. This ensures that the SONET frame
        transmitted from the interface is received back
        at the interface.
lineRemote :
        The signal received at the interface is looped
        back out to the associated transmitter.
        This ensures that the remote equipment that
        originated the signal receives it back. The 
        signal may undergo degradation as a result of
        the characteristics of the transmission 
        medium.

Context

MIB: CISCO-SONET-MIB
OID: .1.3.6.1.4.1.9.9.126.1.1.1.1.1
Type: column
Access: readwrite
Status: current
Parent: csConfigEntry
Table: csConfigTable
Siblings: 5

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	noLoopback
`2`	lineLocal
`3`	lineRemote

Related Objects

Sibling Objects

Object	Type	Syntax	OID
csConfigXmtClockSource Specifies the source of the transmit clock. loopTiming: indicates that the recovered receive clock is used as the transmit clock. localT…	column	Enumeration	`.1.3.6.1.4.1.9.9.126.1.1.1.1.2`
csConfigFrameScramble This object is used to disable or enable the Scrambling option in SONET line.	column	Enumeration	`.1.3.6.1.4.1.9.9.126.1.1.1.1.3`
csConfigType This object represents the configured line type. Sts is SONET format. Stm is SDH format. sonetSts3c : OC3 concatenated sonetStm1 : European standard OC3 sonetSts…	column	Enumeration	`.1.3.6.1.4.1.9.9.126.1.1.1.1.4`
csConfigRDIVType This object specifies the type of RDI-V (Remote Defect Indication - Virtual Tributary/Container) sent by this Network Element (NE) to the remote Network Element. …	column	Enumeration	`.1.3.6.1.4.1.9.9.126.1.1.1.1.5`
csConfigRDIPType This object represents the type of RDI-P (Remote Defect Indication - Path) sent by this Network Element (NE) to remote Network Element. onebit : use 1 bit…	column	Enumeration	`.1.3.6.1.4.1.9.9.126.1.1.1.1.6`