CISCO-SONET-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
13
Rows
13
Columns
67

csConfigTable

table
.1.3.6.1.4.1.9.9.126.1.1.1 · 1 row entry · 6 columns
Open in standard view 
The SONET/SDH configuration table. This table has objects 
for configuring sonet lines.
csConfigEntry entry .1.3.6.1.4.1.9.9.126.1.1.1.1
An entry in the table. There is an entry for each SONET line
in the table. Entries are automatically created for an
ifType value of sonet(39). 'ifAdminStatus' from the ifTable
must be used to enable or disable a line…
Indexes
IF-MIBifIndex
Column Syntax OID
csConfigLoopbackType
This object specifies the desired loopback mode
configuration of the SONET line.
The possible values of this objects are follows:

noLoopback :
Not in the loopback state.
lineLocal :
T…
Enumerationr/w
Enumerated Values:
1noLoopback
2lineLocal
3lineRemote
 .1.3.6.1.4.1.9.9.126.1.1.1.1.1
csConfigXmtClockSource
Specifies the source of the transmit clock.

loopTiming: indicates that the recovered receive
clock is used as the transmit clock.

localTiming: indicates that a local clock sour…
Enumerationr/w
Enumerated Values:
1loopTiming
2localTiming
 .1.3.6.1.4.1.9.9.126.1.1.1.1.2
csConfigFrameScramble
This object is used to disable or enable the Scrambling
option in SONET line.
Enumerationr/w
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.9.9.126.1.1.1.1.3
csConfigType
This object represents the configured line type.
Sts is SONET format. Stm is SDH format.
sonetSts3c : OC3 concatenated
sonetStm1 : European standard OC3
sonetSts12c : OC12 concatenated
sonetStm4 …
Enumeration
Enumerated Values:
1sonetSts3c
2sonetStm1
3sonetSts12c
4sonetStm4
5sonetSts48c
6sonetStm16
7sonetSts192c
8sonetStm64
9sonetSts3
 .1.3.6.1.4.1.9.9.126.1.1.1.1.4
csConfigRDIVType
This object specifies the type of RDI-V (Remote Defect
Indication - Virtual Tributary/Container) sent by this
Network Element (NE) to the remote Network Element.

onebit : use 1 bit RDI-V
…
Enumerationr/w
Enumerated Values:
1onebit
3threebit
 .1.3.6.1.4.1.9.9.126.1.1.1.1.5
csConfigRDIPType
This object represents the type of RDI-P (Remote Defect
Indication - Path) sent by this Network Element (NE)
to remote Network Element.

onebit : use 1 bit RDI-P
threebit : use 3 bit enha…
Enumerationr/w
Enumerated Values:
1onebit
3threebit
 .1.3.6.1.4.1.9.9.126.1.1.1.1.6

csVTConfigTable

table
.1.3.6.1.4.1.9.9.126.1.1.2 · 1 row entry · 5 columns
Open in standard view 
This table contains objects to configure the VT/VC (Virtual
Tributary / Virtual Container) related properties of 
SONET/SDH lines.
csVTConfigEntry entry .1.3.6.1.4.1.9.9.126.1.1.2.1
There is an entry in this table for each SONET line that
supports SONET virtual tributaries or SDH virtual containers.
Each entry in this table will have a corresponding entry
in csConfigTable.
Indexes
No indexes recorded
Column Syntax OID
csTributaryType
Type of the tributary carried within the SONET/SDH signal.

vt15vc11 : carries T1 signal
vt2vc12 : carries E1 signal
Enumerationr/w
Enumerated Values:
1vt15vc11
2vt2vc12
 .1.3.6.1.4.1.9.9.126.1.1.2.1.1
csTributaryMappingType
This object represents the VT/VC mapping type.

asynchronous: In this mode, the channel structure of
DS1/E1 is neither visible nor preserved.

byteSynchronous: In this mo…
Enumerationr/w
Enumerated Values:
1asynchronous
2byteSynchronous
 .1.3.6.1.4.1.9.9.126.1.1.2.1.2
csTributaryFramingType
This object represents the framing type to be assigned to the
virtual tributaries in byte sync mapping mode.

notApplicable : If VT mapping is not byteSynchronous(2).
dsx1ESF : Extend…
Enumerationr/w
Enumerated Values:
1notApplicable
2dsx1D4
3dsx1ESF
 .1.3.6.1.4.1.9.9.126.1.1.2.1.3
csSignallingTransportMode
This object represents the mode used to transport DS0
signalling information for T1 byteSynchronous mapping (GR253).
In signallingTransferMode(2), the robbed-bit signalling is
transferred to the VT header. In clearMod…
Enumerationr/w
Enumerated Values:
1notApplicable
2signallingTransferMode
3clearMode
 .1.3.6.1.4.1.9.9.126.1.1.2.1.4
csTributaryGroupingType
This object represents the method used to group VCs into an
STM-1 signal. Applicable only to SDH.

au3Grouping: STM1<-AU-3<-TUG-2<-TU-12<-VC12 or
STM1<-AU-3<-TUG-2<-TU-11<-VC11.
…
Enumerationr/w
Enumerated Values:
1notApplicable
2au3Grouping
3au4Grouping
 .1.3.6.1.4.1.9.9.126.1.1.2.1.5

csApsConfigTable

table
.1.3.6.1.4.1.9.9.126.1.2.1 · 1 row entry · 16 columns
Open in standard view 
This table contains objects to configure APS 
(Automatic Protection Switching) feature in a SONET 
Line. APS is the ability to configure a pair of SONET 
lines for redundancy so that the hardware will 
automatically switch the active line from working line
to the protection line or vice versa, within 60ms, 
when the active line fails.
csApsConfigEntry entry .1.3.6.1.4.1.9.9.126.1.2.1.1
An entry is created when an APS pair is configured.
To create an entry, the following objects must be
specified:
csApsWorkingIndex, csApsProtectionIndex, csApsEnable,
csApsArchMode. The protection line must not be ac…
Indexes
csApsWorkingIndex
Column Syntax OID
csApsWorkingIndex
When a pair of APS lines is configured, one line has
to be the working line, which is the primary line,
and the other has to be the protection line, which
is the backup line. This object refers to the working line
in th…
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.126.1.2.1.1.1
csApsProtectionIndex
The protection line indicates that it will become
the active line when an APS switch occurs (APS switch
could occur because of a failure on the working line).
For G.783 AnnexB, This index refers to Working Section
2.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.9.9.126.1.2.1.1.2
csApsEnable
This object is used to enable or disable the APS feature
on the working/protection line pairs. When enabled,
the hardware will automatically switch the active line
from the working line to the protection line within 60…
Enumerationr/w
Enumerated Values:
1csApsDisabled
2csApsEnabled
 .1.3.6.1.4.1.9.9.126.1.2.1.1.3
csApsArchMode
This object is used to configure APS architecture mode
on the working/protection line pairs.

All of the following are supported on single slot.
oneToOne(2) is not supported across 2 slots,i.e. the
wo…
Enumerationr/w
Enumerated Values:
1onePlusOne
2oneToOne
3anexBOnePlusOne
4ycableOnePlusOneNok1k2
5straightOnePlusOneNok1k2
 .1.3.6.1.4.1.9.9.126.1.2.1.1.4
csApsActiveLine
This object indicates which line is currently active.
It could be the working line(Section 1 for Annex B),
the protection line(Section 2 for Annex B) or none
if neither working nor protection line is active.
This obje…
Enumeration
Enumerated Values:
1csApsWorkingLine
2csApsProtectionLine
3csApsNone
 .1.3.6.1.4.1.9.9.126.1.2.1.1.5
csApsSigFaultBER
This object contains the Bit Error Rate threshold for
Signal Fault detection on the working line. Once this
threshold is exceeded, an APS switch will occur.
This value is 10 to the -n, where n is between 3 and 5.
Unsigned32r/w
Constraints:
range: 3-5
 .1.3.6.1.4.1.9.9.126.1.2.1.1.6
csApsSigDegradeBER
This object contains the Bit Error Rate threshold for
Signal Degrade detection on the working line. Once this
threshold is exceeded, an APS switch will occur.
This value is 10 to -n where n is between 5 and 9.
Unsigned32r/w
Constraints:
range: 5-9
 .1.3.6.1.4.1.9.9.126.1.2.1.1.7
csApsWaitToRestore
This object contains interval in minutes to wait
before attempting to switch back to working line.
Not applicable if the line is configured in
non-revertive mode, i.e. protection line will
continue to be active, eve…
minutesUnsigned32r/w
Constraints:
range: 1-12
 .1.3.6.1.4.1.9.9.126.1.2.1.1.8
csApsDirection
This object is used to configure the switching
direction which this APS line supports.

Unidirectional : APS switch only in one direction.
Bidirectional : APS switch in both ends of the line.
Enumerationr/w
Enumerated Values:
1uniDirectional
2biDirectional
 .1.3.6.1.4.1.9.9.126.1.2.1.1.9
csApsRevertive
This object is used to configure the APS revertive or
nonrevertive option.

revertive :
Will switch the working line back to active state after
the Wait-To-restore interval has expired and the
wor…
Enumerationr/w
Enumerated Values:
1nonrevertive
2revertive
 .1.3.6.1.4.1.9.9.126.1.2.1.1.10
csApsDirectionOperational
This object shows the actual APS direction that is
implemented on the Near End terminal. APS direction
configured through csApsDirection is negotiated with
the Far End and APS direction setting acceptable to
both end…
Enumeration
Enumerated Values:
1uniDirectional
2biDirectional
 .1.3.6.1.4.1.9.9.126.1.2.1.1.11
csApsArchModeOperational
This object shows the actual APS architecture mode that
is implemented on the Near End terminal. APS architecture
mode configured through csApsArchMode object is
negotiated with the Far End through APS channel.
Archit…
Enumeration
Enumerated Values:
1onePlusOne
2oneToOne
3anexBOnePlusOne
4ycableOnePlusOneNok1k2
5straightOnePlusOneNok1k2
 .1.3.6.1.4.1.9.9.126.1.2.1.1.12
csApsChannelProtocol
This object allows to configure APS channel protocol to
be implemented at Near End terminal.

K1 and K2 overhead bytes in a SONET signal are used as
an APS channel.
This channel is used to carry APS proto…
Enumerationr/w
Enumerated Values:
1bellcore
2itu
 .1.3.6.1.4.1.9.9.126.1.2.1.1.13
csApsFailureStatus
This object indicates APS line failure status.
CsApsLineFailureStatus
Textual Convention: CsApsLineFailureStatus Bits
Type Values:
0noApsLineFailure
1csApsChannelMismatchBit
2csApsProtectionByteFailBit
3csApsFEProtectionFailureBit
4csApsModeMismatchBit
 .1.3.6.1.4.1.9.9.126.1.2.1.1.14
csApsSwitchReason
This object indicates APS line switch reason.
CsApsLineSwitchReason
Textual Convention: CsApsLineSwitchReason Enumeration
Type Values:
1csApsOther
2csApsRevertive
3csApsManual
4csApsSignalDefectLow
5csApsSignalDefectHigh
6csApsSignalFailureLow
7csApsSignalFailureHigh
8csApsForceSwitch
9csApsLockOut
10csApsNoSwitch
 .1.3.6.1.4.1.9.9.126.1.2.1.1.15
csApsPrimarySection
This object indicates which working section is the APS
primary section. In G.783 AnnexB, the K1/K2 Bytes are
received on the secondary Section. All the Switch
Requests are for a switch from the primary section to
the se…
Enumeration
Enumerated Values:
1workingSection1
2workingSection2
3none
 .1.3.6.1.4.1.9.9.126.1.2.1.1.16

cssTotalTable

table
.1.3.6.1.4.1.9.9.126.1.3.1 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Section Total table. It contains the 
cumulative sum of the various statistics for the 24 hour
period preceding the current interval. The object 
'sonetMediumValidIntervals' from RFC2558 contains the
number of 15 minute intervals that have elapsed since
the line is enabled.
cssTotalEntry entry .1.3.6.1.4.1.9.9.126.1.3.1.1
An entry in the SONET/SDH Section Total table. Entries
are created automatically for sonet lines.
Indexes
IF-MIBifIndex
Column Syntax OID
cssTotalESs
The number of Errored Seconds encountered by a SONET/SDH
Section in the last 24 hours.
errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.3.1.1.1
cssTotalSESs
The number of Severely Errored Seconds encountered by a
SONET/SDH Section in the last 24 hours.
severely errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.3.1.1.2
cssTotalSEFSs
The number of Severely Errored Framing Seconds
encountered by a SONET/SDH Section in the last 24 hours.
severely errored framing secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.3.1.1.3
cssTotalCVs
The number of Coding Violations encountered by a
SONET/SDH Section in the last 24 hours.
coding violationsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.3.1.1.4

cssTraceTable

table
.1.3.6.1.4.1.9.9.126.1.3.2 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Section Trace table. This table contains 
objects for tracing the sonet section.
cssTraceEntry entry .1.3.6.1.4.1.9.9.126.1.3.2.1
An entry in the trace table. Entries exist for active sonet
lines. The objects in this table are used to verify
continued connection between the two ends of the line.
Indexes
IF-MIBifIndex
Column Syntax OID
cssTraceToTransmit
Sonet Section Trace To Transmit. This is string that
is transmitted to perform Sonet section trace
diagnostics. The trace string is repetitively
transmited so that a trace receiving terminal can
verify its continued…
OctetStringr/w
Constraints:
range: 64-64
range: 16-16
range: 0-0
 .1.3.6.1.4.1.9.9.126.1.3.2.1.1
cssTraceToExpect
Sonet Section Trace To Expect. The receiving terminal
verifies if the incoming string matches this string.
The value of 'cssTraceFailure' indicates whether a
trace mismatch occurred. The default value is a
zero-leng…
OctetStringr/w
Constraints:
range: 64-64
range: 16-16
range: 0-0
 .1.3.6.1.4.1.9.9.126.1.3.2.1.2
cssTraceFailure
The value of this object is set to 'true' when Sonet
Section received trace does not match the
'cssTraceToExpect'.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.126.1.3.2.1.3
cssTraceReceived
This object is used to view the Sonet Section Trace that
is received by the receiving terminal.
OctetString
Constraints:
range: 64-64
range: 16-16
range: 0-0
 .1.3.6.1.4.1.9.9.126.1.3.2.1.4

cslTotalTable

table
.1.3.6.1.4.1.9.9.126.1.4.1 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Line Total table. It contains the 
cumulative sum of the various statistics for the 24 
hour period preceding the current interval. The object 
'sonetMediumValidIntervals' from RFC2558 contains the 
number of 15 minute intervals that have elapsed since
the line is enabled.
cslTotalEntry entry .1.3.6.1.4.1.9.9.126.1.4.1.1
An entry in the SONET/SDH Line Total table. Entries
are created automatically for sonet lines.
Indexes
IF-MIBifIndex
Column Syntax OID
cslTotalESs
The number of Errored Seconds encountered by a SONET/SDH
Line in the last 24 hours.
errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.1.1.1
cslTotalSESs
The number of Severely Errored Seconds encountered by a
SONET/SDH Line in the last 24 hours.
severely errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.1.1.2
cslTotalCVs
The number of Coding Violations encountered by a
SONET/SDH Line in the last 24 hours.
coding violationsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.1.1.3
cslTotalUASs
The number of Unavailable Seconds encountered by a
SONET/SDH Line in the last 24 hours.
unavailable secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.1.1.4

cslFarEndTotalTable

table
.1.3.6.1.4.1.9.9.126.1.4.2 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Far End Line Total table. It contains the 
cumulative sum of the various statistics for the 24 hour 
period preceding the current interval. The object 
'sonetMediumValidIntervals' from RFC2558 contains the 
number of 15 minute intervals that have elapsed since the 
line is enabled.
cslFarEndTotalEntry entry .1.3.6.1.4.1.9.9.126.1.4.2.1
An entry in the SONET/SDH Far End Line Total table. Entries
are created automatically for sonet lines.
Indexes
IF-MIBifIndex
Column Syntax OID
cslFarEndTotalESs
The number of Errored Seconds encountered by a SONET/SDH Far
End Line in the last 24 hours.
errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.2.1.1
cslFarEndTotalSESs
The number of Severely Errored Seconds encountered by a
SONET/SDH Far End Line in the last 24 hours.
severely errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.2.1.2
cslFarEndTotalCVs
The number of Coding Violations encountered by a SONET/SDH
Far End Line in the last 24 hours.
coding violationsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.2.1.3
cslFarEndTotalUASs
The number of Unavailable Seconds encountered by a
SONET/SDH Far End Line in the last 24 hours.
unavailable secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.4.2.1.4

cspTotalTable

table
.1.3.6.1.4.1.9.9.126.1.5.1 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Path Total table. It contains the cumulative 
sum of the various statistics for the 24 hour period 
preceding the current interval.The object 
'sonetMediumValidIntervals' from RFC2558 contains the number
of 15 minute intervals that have elapsed since the line is 
enabled.
cspTotalEntry entry .1.3.6.1.4.1.9.9.126.1.5.1.1
An entry in the SONET/SDH Path Total table. Entries
are created automatically for sonet lines.
Indexes
IF-MIBifIndex
Column Syntax OID
cspTotalESs
The number of Errored Seconds encountered by a SONET/SDH
Path in the last 24 hours.
errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.1.1.1
cspTotalSESs
The number of Severely Errored Seconds encountered by a
SONET/SDH Path in the last 24 hours.
severely errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.1.1.2
cspTotalCVs
The number of Coding Violations encountered by a
SONET/SDH Path in the last 24 hours.
coding violationsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.1.1.3
cspTotalUASs
The number of Unavailable Seconds encountered by a
SONET/SDH Path in the last 24 hours.
unavailable secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.1.1.4

cspFarEndTotalTable

table
.1.3.6.1.4.1.9.9.126.1.5.2 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Far End Path Total table. Far End is the 
remote end of the line. The table contains the cumulative
sum of the various statistics for the 24 hour period 
preceding the current interval. The object 
'sonetMediumValidIntervals' from RFC2558 contains the
number of 15 minute intervals that have elapsed since
the line is enabled.
cspFarEndTotalEntry entry .1.3.6.1.4.1.9.9.126.1.5.2.1
An entry in the SONET/SDH Far End Path Total table.
Entries are created automatically for sonet lines.
Indexes
IF-MIBifIndex
Column Syntax OID
cspFarEndTotalESs
The number of Errored Seconds encountered by a SONET/SDH
far end path in the last 24 hours.
errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.2.1.1
cspFarEndTotalSESs
The number of Severely Errored Seconds encountered by a
SONET/SDH far end path in the last 24 hours.
severely errored secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.2.1.2
cspFarEndTotalCVs
The number of Coding Violations encountered by a
SONET/SDH far end path in the last 24 hours.
coding violationsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.2.1.3
cspFarEndTotalUASs
The number of Unavailable Seconds encountered by a
SONET/SDH far end path in the last 24 hours.
unavailable secondsSNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.5.2.1.4

cspTraceTable

table
.1.3.6.1.4.1.9.9.126.1.5.3 · 1 row entry · 4 columns
Open in standard view 
The SONET/SDH Path Trace table. This table contains objects 
for tracing the sonet path.
cspTraceEntry entry .1.3.6.1.4.1.9.9.126.1.5.3.1
An entry in the SONET/SDH Path Trace table. The entries
exist for active sonet lines. The objects in this table are
used to verify continued connection between the two ends of
the line.
Indexes
IF-MIBifIndex
Column Syntax OID
cspTraceToTransmit
Sonet Path Trace To Transmit. The trace string is
repetitively transmited so that a trace receiving terminal
can verify its continued receiving terminal can verify its
continued connection to the intended transmitter…
OctetStringr/w
Constraints:
range: 64-64
range: 16-16
range: 0-0
 .1.3.6.1.4.1.9.9.126.1.5.3.1.1
cspTraceToExpect
Sonet Path Trace To Expect. The receiving terminal verifies
if the incoming string matches this string. The value of
'cspTraceFailure' indicates whether a trace mismatch
occured. The default value is a zero-length st…
OctetStringr/w
Constraints:
range: 64-64
range: 16-16
range: 0-0
 .1.3.6.1.4.1.9.9.126.1.5.3.1.2
cspTraceFailure
The value of this object is set to 'true' when Sonet Path
received trace does not match the 'cspTraceToExpect'.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.9.126.1.5.3.1.3
cspTraceReceived
This object is used to view the Sonet Path Trace that is
received by the receiving terminal.
OctetString
Constraints:
range: 64-64
range: 16-16
range: 0-0
 .1.3.6.1.4.1.9.9.126.1.5.3.1.4

csStatsTable

table
.1.3.6.1.4.1.9.9.126.1.6.1 · 1 row entry · 6 columns
Open in standard view 
The SONET/SDH Section statistics table. This table 
maintains the number of times the line encountered Loss of
Signal(LOS), Loss of frame(LOF), Alarm Indication 
signals(AISs), Remote failure indications(RFIs).
csStatsEntry entry .1.3.6.1.4.1.9.9.126.1.6.1.1
An entry in the SONET/SDH statistics table. These are
realtime statistics for the Sonet section, line and path
layers. The statistics are gathered for each sonet line.
An entry is created automatically and is indexed …
Indexes
IF-MIBifIndex
Column Syntax OID
cssLOSs
The number of Loss of signals(LOS) encountered by a
SONET/SDH Section. A high value for this object may
indicate a problem with the Sonet Section layer.
loss of signalsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.6.1.1.1
cssLOFs
The number of Loss of Frames (LOF) encountered by a
SONET/SDH Section. A high value for this object may
indicate a problem with the Sonet Section layer.
loss of framesSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.6.1.1.2
cslAISs
The number of alarm indication signals(AIS) encountered by
a SONET/SDH Line. A high value for this object may indicate a
problem with the Sonet Line layer.
alarm indication signalsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.6.1.1.3
cslRFIs
The number of remote failure indications (RFI) encountered
by a SONET/SDH Line. A high value for this object may
indicate a problem with the Sonet Line layer.
remote failure indicationsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.6.1.1.4
cspAISs
The number of alarm indication signals (AIS) encountered
by a SONET/SDH Path. A high value for this object may
indicate a problem with the Sonet Path layer.
alarm indication signalsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.6.1.1.5
cspRFIs
The number of remote failure indications (RFI)
encountered by a SONET/SDH Path. A high value for this
object may indicate a problem with the Sonet Path layer.
remote failure indicationsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.126.1.6.1.1.6

cspConfigTable

table
.1.3.6.1.4.1.9.9.126.1.7.1 · 1 row entry · 4 columns
Open in standard view 
Cisco extension to SONET Path current table.
cspConfigEntry entry .1.3.6.1.4.1.9.9.126.1.7.1.1
An entry in Cisco extension to the SONET path current table.
Indexes
No indexes recorded
Column Syntax OID
cspSonetPathPayload
Specifies the payload carried by the SONET/SDH Path.
The payload specification corresponds to C2 (Signal Label)
overhead byte in SONET/SDH Path Overhead:
unequipped(1) : Path is not provisioned to carry any payload.
…
Enumerationr/w
Enumerated Values:
1unequipped
2unspecified
3ds3
4vt15vc11
5vt2vc12
6atmCell
7hdlcFr
8e3
9vtStructured
 .1.3.6.1.4.1.9.9.126.1.7.1.1.1
cspTributaryMappingType
This object represents the VT/VC mapping type.
asynchronous: In this mode, the channel structure of
DS1/E1 is neither visible nor preserved.

byteSynchronous: In this mode, the DS0 signals i…
Enumerationr/w
Enumerated Values:
1asynchronous
2byteSynchronous
 .1.3.6.1.4.1.9.9.126.1.7.1.1.2
cspSignallingTransportMode
This object represents the mode used to transport DS0
Signalling information for T1 byteSynchronous mapping
(GR253).
In signallingTransferMode(2), the robbed-bit signalling
is transferred to the VT header. In clearMod…
Enumerationr/w
Enumerated Values:
1notApplicable
2signallingTransferMode
3clearMode
 .1.3.6.1.4.1.9.9.126.1.7.1.1.3
cspTributaryGroupingType
This object represents the method used to group VCs into
an STM-1 signal. Applicable only to SDH.

au3Grouping: STM1<-AU-3<-TUG-2<-TU-12<-VC12 or
STM1<-AU-3<-TUG-2<-TU-11<-VC11.
…
Enumerationr/w
Enumerated Values:
1notApplicable
2au3Grouping
3au4Grouping
 .1.3.6.1.4.1.9.9.126.1.7.1.1.4

csAu4Tug3ConfigTable

table
.1.3.6.1.4.1.9.9.126.1.9.1 · 1 row entry · 2 columns
Open in standard view 
This table contains objects to configure the VC( Virtual
Container) related properties of a TUG-3 within a AU-4 
paths.
          
This table allows creation of
following multiplexing structure:
STM-1/AU-4/TUG-3/TU-3/DS3
STM-1/AU-4/TUG-3/TU-3/E3
STM-1/AU-4/TUG-3/TUG-2/TU-11/DS1
STM-1/AU-4/TUG-3/TUG-2/TU-12/E1
          
Three entries are created in this table for a given AU-4 
path when cspSonetPathPayload object is set to one of the 
following:
    vt15vc11(4),
    vt2vc12(5),
    ds3(3),
    e3(8),
    vtStructured(9)
csAu4Tug3ConfigEntry entry .1.3.6.1.4.1.9.9.126.1.9.1.1
There is an entry in this table for each TUG-3 within a
AU-4 SDH path that supports SDH virtual container VC-4.
The ifIndex value represents an entry in ifTable with
ifType = sonetPath(50).The ifTable entry applicable …
Indexes
IF-MIBifIndex csAu4Tug3
Column Syntax OID
csAu4Tug3
This object represents the TUG-3 number.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.9.9.126.1.9.1.1.1
csAu4Tug3Payload
This object is used for configuring the payload
for the tributary group.

The possible values are :

vc11 : When set to 'vc11' following things are done:
- 28 entries created in ifTa…
Enumerationr/w
Enumerated Values:
1other
2vc11
3vc12
4tu3ds3
5tu3e3
 .1.3.6.1.4.1.9.9.126.1.9.1.1.2