rttMplsVpnMonTypeSecFreqValue
CISCO-RTTMON-MIB ·
.1.3.6.1.4.1.9.9.42.1.2.16.1.5
Object
column
r/w
Integer32
This object represents the value that needs to be applied to
secondary frequency of individual RTT operations configured by
Auto SAA L3 MPLS VPN.
Setting rttMplsVpnMonTypeSecFreqValue without setting
rttMplsVpnMonTypeSecFreqType will not have any effect.
Context
- MIB
- CISCO-RTTMON-MIB
- OID
.1.3.6.1.4.1.9.9.42.1.2.16.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rttMplsVpnMonTypeEntry
- Table
- rttMplsVpnMonTypeTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-604800
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rttMplsVpnMonTypeInterval This value represents the inter-packet delay between packets
and is in milliseconds. This value is currently used for
Jitter probe. This object is applicable to jitter probe only.… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.1 |
| rttMplsVpnMonTypeLpdMaxSessions This object represents the number of concurrent path discovery
requests that will be active at one time per MPLS VPN control
row. This object is meant for reducing the time for di… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.10 |
| rttMplsVpnMonTypeLpdSessTimeout This object specifies the maximum allowed duration of a
particular tree trace request.
If no response is received in configured time the request will
be considered … | column | seconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.11 |
| rttMplsVpnMonTypeLpdEchoTimeout This object specifies the timeout value for the LSP echo
requests which are sent while performing the LSP Path
Discovery. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.12 |
| rttMplsVpnMonTypeLpdEchoInterval This object specifies the send interval between LSP echo
requests which are sent while performing the LSP Path
Discovery. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.13 |
| rttMplsVpnMonTypeLpdEchoNullShim This object specifies if the explicit-null label is added to
LSP echo requests which are sent while performing the LSP Path
Discovery.
If set to TRUE all the probes… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.16.1.14 |
| rttMplsVpnMonTypeLpdScanPeriod This object specifies the scan time for the completion of LSP
Path Discovery for all the PEs discovered for this control row.
If the scan period is exceeded on completion of the L… | column | minutes Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.15 |
| rttMplsVpnMonTypeLpdStatHours The maximum number of hours of data to be kept per LPD
group. The LPD group statistics will be kept in an hourly
bucket. At the maximum there can be two buckets.
The value of 'one… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.16 |
| rttMplsVpnMonTypeNumPackets This value represents the number of packets that need to be
transmitted. This value is currently used for Jitter probe.
This object is applicable to jitter probe only.
… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.2 |
| rttMplsVpnMonTypeDestPort This object represents the target's port number to which the
packets need to be sent.
This value will be configured as target port for all the
operations that is go… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.3 |
| rttMplsVpnMonTypeSecFreqType This object specifies the reaction type for which the
rttMplsVpnMonTypeSecFreqValue should be applied.
The Value 'timeout' will cause secondary frequency to be set
… | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.16.1.4 |
| rttMplsVpnMonTypeLspSelector A string which specifies the address of the local host
(127.X.X.X).
This object will be used as lsp-selector in MPLS RTT
operations configured by the Auto SAA L3 MP… | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.16.1.6 |
| rttMplsVpnMonTypeLSPReplyMode This object specifies the reply mode for the LSP Echo
requests originated by the operations configured by the
Auto SAA L3 MPLS VPN.
This object is currently used by… | column | CISCO-RTTMON-TC-MIBRttMonLSPPingReplyMode | .1.3.6.1.4.1.9.9.42.1.2.16.1.7 |
| rttMplsVpnMonTypeLSPTTL This object represents the TTL setting for MPLS echo request
packets originated by the operations configured by the
Auto SAA L3 MPLS VPN.
This object is currently u… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.8 |
| rttMplsVpnMonTypeLSPReplyDscp This object specifies the DSCP value to be set in the IP header
of the LSP echo reply packet.
The value of this object will be in range of DiffServ codepoint
values between 0 to 6… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.16.1.9 |