CISCO-RTTMON-MIB Table View

A table of which contains the supported Rtt
Monitor Types.
          
See the RttMonRttType textual convention for
the definition of each type.

rttMonApplSupportedRttTypesEntry row .1.3.6.1.4.1.9.9.42.1.1.7.1

A list that presents the valid Rtt Monitor
Types.

Indexes

rttMonApplSupportedRttTypes

Column	Syntax	OID
rttMonApplSupportedRttTypes This object indexes the supported 'RttMonRttType' types.	CISCO-RTTMON-TC-MIBRttMonRttType Type Values: 1 echo 2 pathEcho 3 fileIO 4 script 5 udpEcho 6 tcpConnect 7 http 8 dns 9 jitter 10 dlsw 11 dhcp 12 ftp 13 voip 14 rtp 15 lspGroup 16 icmpjitter 17 lspPing 18 lspTrace 19 ethernetPing 20 ethernetJitter 21 lspPingPseudowire 22 video 23 y1731Delay 24 y1731Loss 25 mcastJitter 26 fabricPathEcho 27 pathJitter	.1.3.6.1.4.1.9.9.42.1.1.7.1.1
rttMonApplSupportedRttTypesValid This object defines the supported 'RttMonRttType' types.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.1.7.1.2

A table of which contains the supported Rtt
Monitor Protocols.
          
See the RttMonProtocol textual convention 
for the definition of each protocol.

rttMonApplSupportedProtocolsEntry row .1.3.6.1.4.1.9.9.42.1.1.8.1

A list that presents the valid Rtt Monitor
Protocols.

Indexes

rttMonApplSupportedProtocols

Column	Syntax	OID
rttMonApplSupportedProtocols This object indexes the supported 'RttMonProtocol' protocols.	CISCO-RTTMON-TC-MIBRttMonProtocol Type Values: 1 notApplicable 2 ipIcmpEcho 3 ipUdpEchoAppl 4 snaRUEcho 5 snaLU0EchoAppl 6 snaLU2EchoAppl 7 snaLU62Echo 8 snaLU62EchoAppl 9 appleTalkEcho 10 appleTalkEchoAppl 11 decNetEcho 12 decNetEchoAppl 13 ipxEcho 14 ipxEchoAppl 15 isoClnsEcho 16 isoClnsEchoAppl 17 vinesEcho 18 vinesEchoAppl 19 xnsEcho 20 xnsEchoAppl 21 apolloEcho 22 apolloEchoAppl 23 netbiosEchoAppl 24 ipTcpConn 25 httpAppl 26 dnsAppl 27 jitterAppl 28 dlswAppl 29 dhcpAppl 30 ftpAppl 31 mplsLspPingAppl 32 voipAppl 33 rtpAppl 34 icmpJitterAppl 35 ethernetPingAppl 36 ethernetJitterAppl 37 videoAppl 38 y1731dmm 39 y17311dm 40 y1731lmm 41 mcastJitterAppl 42 y1731slm 43 y1731dmmv1 44 fabricPathEchoAppl	.1.3.6.1.4.1.9.9.42.1.1.8.1.1
rttMonApplSupportedProtocolsValid This object defines the supported 'RttMonProtocol' protocols.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.1.8.1.2

A table of which contains the previously
configured Script Names and File IO targets.
          
These Script Names and File IO targets are installed
via a different mechanism than this application, and
are specific to each platform.

rttMonApplPreConfigedEntry row .1.3.6.1.4.1.9.9.42.1.1.9.1

A list of objects that describe the previously
configured Script Names and File IO targets.

Indexes

rttMonApplPreConfigedType rttMonApplPreConfigedName

Column	Syntax	OID
rttMonApplPreConfigedTypeobsolete This is the type of value being stored in the rttMonApplPreConfigedName object.	Enumeration Enumerated Values: 1 filePath 2 scriptName	.1.3.6.1.4.1.9.9.42.1.1.9.1.2
rttMonApplPreConfigedNameobsolete This is either one of the following depending on the value of the rttMonApplPreConfigedType object: - The file path to a server. One of these file paths must be used when defining an entry in the …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.1.9.1.3
rttMonApplPreConfigedValidobsolete When this row exists, this value will be 'true'. This object exists only to create a valid row in this table.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.1.9.1.4

A table which contains the definitions for key-strings
that will be used in authenticating RTR Control Protocol.

rttMonApplAuthEntry row .1.3.6.1.4.1.9.9.42.1.1.14.1

A list that presents the valid parameters for Authenticating
RTR Control Protocol.

Indexes

rttMonApplAuthIndex

Column	Syntax	OID
rttMonApplAuthIndex Uniquely identifies a row in the rttMonApplAuthTable. This is a pseudo-random number selected by the management station when creating a row via the rttMonApplAuthStatus object. If the pseudo-random number is already in…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.1.14.1.1
rttMonApplAuthKeyChain A string which represents the key-chain name. If multiple key-strings are specified, then the authenticator will alternate between the specified strings.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.9.9.42.1.1.14.1.2
rttMonApplAuthKeyString1 A string which represents a key-string name whose id is 1.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.9.9.42.1.1.14.1.3
rttMonApplAuthKeyString2 A string which represents a key-string name whose id is 2.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.9.9.42.1.1.14.1.4
rttMonApplAuthKeyString3 A string which represents a key-string name whose id is 3.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.9.9.42.1.1.14.1.5
rttMonApplAuthKeyString4 A string which represents a key-string name whose id is 4.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.9.9.42.1.1.14.1.6
rttMonApplAuthKeyString5 A string which represents a key-string name whose id is 5.	OctetStringr/w Constraints: range: 1-48	.1.3.6.1.4.1.9.9.42.1.1.14.1.7
rttMonApplAuthStatus The status of the Authentication row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.42.1.1.14.1.8

A table of Round Trip Time (RTT) monitoring definitions.
          
The RTT administration control is in multiple tables.  
This first table, is used to create a conceptual RTT 
control row.  The following tables contain objects which 
configure scheduling, information gathering, and 
notification/trigger generation.  All of these tables 
will create the same conceptual RTT control row as this 
table using this tables' index as their own index. 
          
This table is limited in size by the agent 
implementation.  The object rttMonApplNumCtrlAdminEntry
will reflect this tables maximum number of entries.

rttMonCtrlAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.1.1

A base list of objects that define a conceptual RTT
control row.

Indexes

rttMonCtrlAdminIndex

Column	Syntax	OID
rttMonCtrlAdminIndex Uniquely identifies a row in the rttMonCtrlAdminTable. This is a pseudo-random number, selected by the management station or auto-generated based on operation started by the management station,when creating a row via…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.42.1.2.1.1.1
rttMonCtrlAdminOwner Identifies the entity that created this table row.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.42.1.2.1.1.2
rttMonCtrlAdminTagdeprecated A string which is used by a managing application to identify the RTT target. This string is inserted into trap notifications, but has no other significance to the agent. rttMonCtrlAdminTag object is supe…	OctetStringr/w Constraints: range: 0-16	.1.3.6.1.4.1.9.9.42.1.2.1.1.3
rttMonCtrlAdminRttType The type of RTT operation to be performed. This value must be set in the same PDU or before setting any type specific configuration. Note: The RTT operation 'lspGroup' cannot be created via this control …	CISCO-RTTMON-TC-MIBRttMonRttTyper/w Type Values: 1 echo 2 pathEcho 3 fileIO 4 script 5 udpEcho 6 tcpConnect 7 http 8 dns 9 jitter 10 dlsw 11 dhcp 12 ftp 13 voip 14 rtp 15 lspGroup 16 icmpjitter 17 lspPing 18 lspTrace 19 ethernetPing 20 ethernetJitter 21 lspPingPseudowire 22 video 23 y1731Delay 24 y1731Loss 25 mcastJitter 26 fabricPathEcho 27 pathJitter	.1.3.6.1.4.1.9.9.42.1.2.1.1.4
rttMonCtrlAdminThreshold This object defines an administrative threshold limit. If the RTT operation time exceeds this limit and if the conditions specified in rttMonReactAdminThresholdType or rttMonHistoryAdminFilter are satisfied, a thresho…	millisecondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.1.1.5
rttMonCtrlAdminFrequency Specifies the duration between initiating each RTT operation. This object cannot be set to a value which would be a shorter duration than rttMonCtrlAdminTimeout. When the RttMonRttType sp…	secondsInteger32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.9.9.42.1.2.1.1.6
rttMonCtrlAdminTimeout Specifies the duration to wait for a RTT operation completion. The value of this object cannot be set to a value which would specify a duration exceeding rttMonCtrlAdminFrequency. For connection orient…	millisecondsInteger32r/w Constraints: range: 0-604800000	.1.3.6.1.4.1.9.9.42.1.2.1.1.7
rttMonCtrlAdminVerifyData When set to true, the resulting data in each RTT operation is compared with the expected data. This includes checking header information (if possible) and exact packet size. Any mismatch will be recorded in the rttMon…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.1.1.8
rttMonCtrlAdminStatus The status of the conceptual RTT control row. In order for this object to become active, the following row objects must be defined: - rttMonCtrlAdminRttType Additionally: - for echo, pathEcho based o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.42.1.2.1.1.9
rttMonCtrlAdminNvgen When set to true, this entry will be shown in 'show running' command and can be saved into Non-volatile memory.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.1.1.10
rttMonCtrlAdminGroupName If the operation is created through auto measure group creation, then this string will specify the group name to which this operation is associated.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.9.42.1.2.1.1.11
rttMonCtrlAdminLongTag This object provides additional information about the Probe and is inserted into trap notifications, but has no other significance to the agent. Setting this object will overwrite any description already …	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.9.9.42.1.2.1.1.12

A table that contains Round Trip Time (RTT) specific
definitions.
          
This table is controlled via the 
rttMonCtrlAdminTable.  Entries in this table are
created via the rttMonCtrlAdminStatus object.

rttMonEchoAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.2.1

A list of objects that define specific configuration for
RttMonRttType conceptual Rtt control rows.

Indexes

rttMonCtrlAdminIndex

Column	Syntax	OID
rttMonEchoAdminProtocol Specifies the protocol to be used to perform the RTT operation. The following list defines what protocol should be used for each probe type: echo, pathEcho - ipIcmpEcho / mplsLspPingAppl pathJitter …	CISCO-RTTMON-TC-MIBRttMonProtocolr/w Type Values: 1 notApplicable 2 ipIcmpEcho 3 ipUdpEchoAppl 4 snaRUEcho 5 snaLU0EchoAppl 6 snaLU2EchoAppl 7 snaLU62Echo 8 snaLU62EchoAppl 9 appleTalkEcho 10 appleTalkEchoAppl 11 decNetEcho 12 decNetEchoAppl 13 ipxEcho 14 ipxEchoAppl 15 isoClnsEcho 16 isoClnsEchoAppl 17 vinesEcho 18 vinesEchoAppl 19 xnsEcho 20 xnsEchoAppl 21 apolloEcho 22 apolloEchoAppl 23 netbiosEchoAppl 24 ipTcpConn 25 httpAppl 26 dnsAppl 27 jitterAppl 28 dlswAppl 29 dhcpAppl 30 ftpAppl 31 mplsLspPingAppl 32 voipAppl 33 rtpAppl 34 icmpJitterAppl 35 ethernetPingAppl 36 ethernetJitterAppl 37 videoAppl 38 y1731dmm 39 y17311dm 40 y1731lmm 41 mcastJitterAppl 42 y1731slm 43 y1731dmmv1 44 fabricPathEchoAppl	.1.3.6.1.4.1.9.9.42.1.2.2.1.1
rttMonEchoAdminTargetAddress A string which specifies the address of the target.	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.2.1.2
rttMonEchoAdminPktDataRequestSize This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' RTT request/responses, this value represents t…	octetsInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.9.9.42.1.2.2.1.3
rttMonEchoAdminPktDataResponseSize This object represents the number of octets to be placed into the ARR Data portion of the response message. This value is passed to the RTT Echo Server via a field in the ARR Header. For non-ARR RTT reque…	Integer32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.9.9.42.1.2.2.1.4
rttMonEchoAdminTargetPort This object represents the target's port number. This object is applicable to udpEcho, tcpConnect and jitter probes.	Integer32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.9.9.42.1.2.2.1.5
rttMonEchoAdminSourceAddress A string which specifies the IP address of the source. This object is applicable to all probes except dns, dlsw and sna.	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.2.1.6
rttMonEchoAdminSourcePort This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system. This object is applicable to all probes except dns, dlsw and sna.	Integer32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.9.9.42.1.2.2.1.7
rttMonEchoAdminControlEnable If this object is enabled, then the RTR application will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router. This object is not a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.8
rttMonEchoAdminTOS This object represents the type of service octet in an IP header. This object is not applicable to dhcp, dns, ethernetPing and ethernetJitter.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.42.1.2.2.1.9
rttMonEchoAdminLSREnable If this object is enabled then it means that the application calculates response time for a specific path, defined in rttMonEchoPathAdminEntry. This object is applicable to echo probe only.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.10
rttMonEchoAdminTargetAddressString A string which specifies the address of the target. This string can be in IP address format or a hostname. This object is applicable to dns probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.11
rttMonEchoAdminNameServer A string which specifies the ip address of the name-server. This object is applicable to dns probe only.	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.2.1.12
rttMonEchoAdminOperation A code that represents the specific type of RTT operation. This object is applicable to http and ftp probe only.	CISCO-RTTMON-TC-MIBRttMonOperationr/w Type Values: 0 notApplicable 1 httpGet 2 httpRaw 3 ftpGet 4 ftpPassive 5 ftpActive 6 voipDTAlertRinging 7 voipDTConnectOK	.1.3.6.1.4.1.9.9.42.1.2.2.1.13
rttMonEchoAdminHTTPVersion A string which specifies the version number of the HTTP Server. The syntax for the version string is <major number>.<minor number> An example would be 1.0, 1.1 etc.,. This object is applicable to http probe only.	OctetStringr/w Constraints: range: 3-10	.1.3.6.1.4.1.9.9.42.1.2.2.1.14
rttMonEchoAdminURL A string which represents the URL to which a HTTP probe should communicate with. This object is applicable to http probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.15
rttMonEchoAdminCache If this object is false then it means that HTTP request should not download cached pages. This means that the request should be forwarded to the origin server. This object is applicable to http probe only.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.16
rttMonEchoAdminInterval This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.	millisecondsInteger32r/w Constraints: range: 0-60000	.1.3.6.1.4.1.9.9.42.1.2.2.1.17
rttMonEchoAdminNumPackets This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.42.1.2.2.1.18
rttMonEchoAdminProxy This string represents the proxy server information. This object is applicable to http probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.19
rttMonEchoAdminString1 This string stores the content of HTTP raw request. If the request cannot fit into String1 then it should be split and put in Strings 1 through 5. This string stores the content of the DHCP raw option da…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.20
rttMonEchoAdminString2 This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.21
rttMonEchoAdminString3 This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.22
rttMonEchoAdminString4 This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.23
rttMonEchoAdminString5 This string stores the content of HTTP raw request. rttMonEchoAdminString1-5 are concatenated to form the HTTP raw request used in the RTT operation. This object is applicable to http probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.24
rttMonEchoAdminMode A code that represents the specific type of RTT operation. This object is applicable to ftp probe only.	CISCO-RTTMON-TC-MIBRttMonOperationr/w Type Values: 0 notApplicable 1 httpGet 2 httpRaw 3 ftpGet 4 ftpPassive 5 ftpActive 6 voipDTAlertRinging 7 voipDTConnectOK	.1.3.6.1.4.1.9.9.42.1.2.2.1.25
rttMonEchoAdminVrfName This field is used to specify the VPN name in which the RTT operation will be used. For regular RTT operation this field should not be configured. The agent will use this field to identify the VPN routing Table for thi…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.42.1.2.2.1.26
rttMonEchoAdminCodecType Specifies the codec type to be used with jitter probe. This is applicable only for the jitter probe. If codec-type is configured the following parameters cannot be configured. rttMonEchoAdminPktDataReque…	CISCO-RTTMON-TC-MIBRttMonCodecTyper/w Type Values: 0 notApplicable 1 g711ulaw 2 g711alaw 3 g729a	.1.3.6.1.4.1.9.9.42.1.2.2.1.27
rttMonEchoAdminCodecInterval This field represents the inter-packet delay between packets and is in milliseconds. This object is applicable only to jitter probe which uses codec type.	millisecondsInteger32r/w Constraints: range: 0-60000	.1.3.6.1.4.1.9.9.42.1.2.2.1.28
rttMonEchoAdminCodecPayload This object represents the number of octets that needs to be placed into the Data portion of the message. This value is used only for jitter probe which uses codec type.	octetsInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.9.9.42.1.2.2.1.29
rttMonEchoAdminCodecNumPackets This value represents the number of packets that need to be transmitted. This value is used only for jitter probe which uses codec type.	Integer32r/w Constraints: range: 0-60000	.1.3.6.1.4.1.9.9.42.1.2.2.1.30
rttMonEchoAdminICPIFAdvFactor The advantage factor is dependant on the type of access and how the service is to be used. Conventional Wire-line 0 Mobility within Building 5 Mobility within geographic area 10 Access to hard-to-reach location …	Integer32r/w Constraints: range: 0-20	.1.3.6.1.4.1.9.9.42.1.2.2.1.31
rttMonEchoAdminLSPFECType The type of the target FEC for the RTT 'echo' and 'pathEcho' operations based on 'mplsLspPingAppl' RttMonProtocol. ldpIpv4Prefix - LDP IPv4 prefix.	Enumerationr/w Enumerated Values: 1 ldpIpv4Prefix	.1.3.6.1.4.1.9.9.42.1.2.2.1.32
rttMonEchoAdminLSPSelector A string which specifies a valid 127/8 address. This address is of the form 127.x.y.z. This address is not used to route the MPLS echo packet to the destination but is used for load balancing in cases where the IP paylo…	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.2.1.33
rttMonEchoAdminLSPReplyMode This object specifies the reply mode for the LSP Echo requests.	CISCO-RTTMON-TC-MIBRttMonLSPPingReplyModer/w Type Values: 1 replyIpv4Udp 2 replyIpv4UdpRA	.1.3.6.1.4.1.9.9.42.1.2.2.1.34
rttMonEchoAdminLSPTTL This object represents the TTL setting for MPLS echo request packets. For ping operation this represents the TTL value to be set in the echo request packet. For trace operation it represent the maximum ttl value that ca…	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.42.1.2.2.1.35
rttMonEchoAdminLSPExp This object represents the EXP value that needs to be put as precedence bit in the MPLS echo request IP header.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.9.42.1.2.2.1.36
rttMonEchoAdminPrecision This object specifies the accuracy of statistics that needs to be calculated milliseconds - The accuracy of stats will be of milliseconds microseconds - The accuracy of stats will be in microseconds. This value can be s…	Enumerationr/w Enumerated Values: 1 milliseconds 2 microseconds	.1.3.6.1.4.1.9.9.42.1.2.2.1.37
rttMonEchoAdminProbePakPriority This object specifies the priority that will be assigned to probe packet. This value can be set only for jitter operation	Enumerationr/w Enumerated Values: 1 normal 2 high	.1.3.6.1.4.1.9.9.42.1.2.2.1.38
rttMonEchoAdminOWNTPSyncTolAbs This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchroniz…	microsecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.42.1.2.2.1.39
rttMonEchoAdminOWNTPSyncTolPct This object specifies the total clock synchronization error on source and responder that is considered acceptable for oneway measurement when NTP is used as clock synchronization mechanism. The total clock synchroniz…	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.9.9.42.1.2.2.1.40
rttMonEchoAdminOWNTPSyncTolType This object specifies whether the value in specified for oneway NTP sync tolerance is absolute value or percent value	Enumerationr/w Enumerated Values: 1 percent 2 absolute	.1.3.6.1.4.1.9.9.42.1.2.2.1.41
rttMonEchoAdminCalledNumber This string stores the called number of post dial delay. This object is applicable to voip post dial delay probe only. The number will be like the one actualy the user could dial. It has the number required by the local…	OctetStringr/w Constraints: range: 0-24	.1.3.6.1.4.1.9.9.42.1.2.2.1.42
rttMonEchoAdminDetectPoint A code that represents the detect point of post dial delay. This object is applicable to SAA post dial delay probe only.	CISCO-RTTMON-TC-MIBRttMonOperationr/w Type Values: 0 notApplicable 1 httpGet 2 httpRaw 3 ftpGet 4 ftpPassive 5 ftpActive 6 voipDTAlertRinging 7 voipDTConnectOK	.1.3.6.1.4.1.9.9.42.1.2.2.1.43
rttMonEchoAdminGKRegistration A boolean that represents VoIP GK registration delay. This object is applicable to SAA GK registration delay probe only.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.44
rttMonEchoAdminSourceVoicePort A string which specifies the voice-port on the source gateway. This object is applicable to RTP probe only.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.2.1.45
rttMonEchoAdminCallDuration Duration of RTP/Video Probe session. This object is applicable to RTP and Video probe.	Integer32r/w Constraints: range: 1-600	.1.3.6.1.4.1.9.9.42.1.2.2.1.46
rttMonEchoAdminLSPReplyDscp This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in range of DiffServ codepoint values between 0 to 63. Note: This object cann…	Integer32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.9.9.42.1.2.2.1.47
rttMonEchoAdminLSPNullShim This object specifies if the explicit-null label is to be added to LSP echo requests which are sent while performing RTT operation.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.48
rttMonEchoAdminTargetMPID This object specifies the destination maintenance point ID. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to 0 for other types of operations.	CISCO-ETHER-CFM-MIBCfmMepidr/w Type Constraints: range: 0..8191	.1.3.6.1.4.1.9.9.42.1.2.2.1.49
rttMonEchoAdminTargetDomainName This object specifies the name of the domain in which the destination maintenance point lies. It is only applicable to ethernetPing and ethernetJitter operation.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.42.1.2.2.1.50
rttMonEchoAdminTargetVLAN This object specifies the ID of the VLAN in which the destination maintenance point lies. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to 0 for other types of operations.	Q-BRIDGE-MIBVlanIdr/w Type Constraints: range: 1..4094	.1.3.6.1.4.1.9.9.42.1.2.2.1.51
rttMonEchoAdminEthernetCOS This object specifies the class of service in an Ethernet packet header. It is only applicable to ethernetPing and ethernetJitter operation.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.9.42.1.2.2.1.52
rttMonEchoAdminLSPVccvID This object specifies MPLS LSP pseudowire VCCV ID values between 1 to 2147483647. Note: This object cannot be set to value of 0. This default value specifies that VCCV is not set for this row.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.2.1.53
rttMonEchoAdminTargetEVC This object specifies the Ethernet Virtual Connection in which the destination maintenance point lies. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to NULL for other types of oper…	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.9.9.42.1.2.2.1.54
rttMonEchoAdminTargetMEPPort This object specifies that Port Level CFM testing towards an Outward/Down MEP will be used. It is only applicable to ethernetPing and ethernetJitter operation. It will be set to NULL for other types of operations.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.55
rttMonEchoAdminVideoTrafficProfile A string which represents the profile name to which a video probe should use. This object is applicable to video probe only.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.42.1.2.2.1.56
rttMonEchoAdminDscp This object represents the Differentiated Service Code Point (DSCP) QoS marking in the generated synthetic packets. Value - DiffServ Class 0 - BE (default) 10 - AF11 12 - AF12 14 - AF13 18…	DIFFSERV-DSCP-TCDscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.9.42.1.2.2.1.57
rttMonEchoAdminReserveDsp This object represents the video traffic generation source. be : best effort using DSP but without reservation gs : guaranteed service using DSP with reservation na : not applicable for not using DSP	Enumerationr/w Enumerated Values: 1 be 2 gs 3 na	.1.3.6.1.4.1.9.9.42.1.2.2.1.58
rttMonEchoAdminInputInterface This object represents the network input interface on the sender router where the synthetic packets are received from the emulated endpoint source. This is used for path congruence with correct feature processing at the…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.42.1.2.2.1.59
rttMonEchoAdminEmulateSourceAddress This object specifies the IP address of the emulated source from which the synthetic packets would be generated. If this object is not specified, the emulated source IP address will by default be the same as rttMonEchoA…	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.2.1.60
rttMonEchoAdminEmulateSourcePort This object represents the port number of the emulated source from which the synthetic packets would be generated. If this object is not specified, the emulated source port number will by default be the same as rttMonEc…	Integer32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.9.9.42.1.2.2.1.61
rttMonEchoAdminEmulateTargetAddress This object specifies the IP address of the emulated target by which the synthetic packets would be received. If this object is not specified, the emulated target IP address will by default be the same as rttMonEchoAdmi…	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.2.1.62
rttMonEchoAdminEmulateTargetPort This object represents the port number of the emulated target by which the synthetic packets would be received. If this object is not specified, the emulated target port number will by default be the same as rttMonEchoA…	Integer32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.9.9.42.1.2.2.1.63
rttMonEchoAdminTargetMacAddress This object indicates the MAC address of the target device. This object is only applicable for Y.1731 operations. rttMonEchoAdminTargetMacAddress and rttMonEchoAdminTargetMPID may not be used in conjunction.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.42.1.2.2.1.64
rttMonEchoAdminSourceMacAddress This object indicates the MAC address of the source device. This object is only applicable for Y.1731 operations. rttMonEchoAdminSourceMacAddress and rttMonEchoAdminSourceMPID may not be used in conjunction.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.42.1.2.2.1.65
rttMonEchoAdminSourceMPID This object indicates the source maintenance point ID. It is only applicable to Y.1731 operation. It will be set to zero for other types of opearations. rttMonEchoAdminSourceMPID and rttMonEchoAdminSourceMacAddress m…	CISCO-ETHER-CFM-MIBCfmMepid Type Constraints: range: 0..8191	.1.3.6.1.4.1.9.9.42.1.2.2.1.66
rttMonEchoAdminEndPointListName This object specifies the name of endpoint list which a probe uses to generate operations.	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.9.9.42.1.2.2.1.67
rttMonEchoAdminSSM This object specifies if Source Specific Multicast is to be added. This object is applicable to multicast probe only.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.68
rttMonEchoAdminControlRetry This object specifies the maximum number of retries for control message.	Unsigned32r/w Constraints: range: 1-5	.1.3.6.1.4.1.9.9.42.1.2.2.1.69
rttMonEchoAdminControlTimeout This object specifies the wait duration before control message timeout.	millisecondsUnsigned32r/w Constraints: range: 1-10000	.1.3.6.1.4.1.9.9.42.1.2.2.1.70
rttMonEchoAdminIgmpTreeInit This object specifies number of packets to be sent for multicast tree setup. This object is applicable to multicast probe only.	Unsigned32r/w Constraints: range: 0-10	.1.3.6.1.4.1.9.9.42.1.2.2.1.71
rttMonEchoAdminEnableBurst This object indicates that packets will be sent in burst.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.72
rttMonEchoAdminAggBurstCycles This object indicates the number of burst cycles to be sent during the aggregate interval. This value is currently used for Y1731 SLM(Synthetic Loss Measurment) probe. This object is applicable to Y1731 SLM probe only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.42.1.2.2.1.73
rttMonEchoAdminLossRatioNumFrames This object indicates the number of frames over which to calculate the frame loss ratio. This object is applicable to Y1731 SLM probe only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.42.1.2.2.1.74
rttMonEchoAdminAvailNumFrames This object indicates the number of frames over which to calculate the availability. This object is applicable to Y1731 SLM probe only.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.42.1.2.2.1.75
rttMonEchoAdminTstampOptimization This object specifies whether timestamp optimization is enabled. When the value is 'true' then timestamp optimization is enabled. The probe will utilize lower layer (Hardware/Packet Processor) timestampi…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.2.1.76
rttMonEchoAdminTargetSwitchId This object represents the destination Switch Id that needed to send one TRILL/FB OAM Loopback request. This object is applicable to Fabric Path Echo probe only. Value 0 means not applicable.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.42.1.2.2.1.77
rttMonEchoAdminProfileId This object represents the destination Profile Id that needed to send one TRILL/FB OAM Loopback request. This object is applicable to Fabric Path Echo probe only. Value 0 means not applicable.	Unsigned32r/w Constraints: range: 0-1023	.1.3.6.1.4.1.9.9.42.1.2.2.1.78
rttMonEchoAdminOutputInterface This object represents the network interface on the sender router where the packets are transmitted from the emulated endpoint source. The user can get the InterfaceIndex number from ifIndex object by loo…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.42.1.2.2.1.79

A table of Round Trip Time (RTT) monitoring 'fileIO'
specific definitions.
          
When the RttMonRttType is not 'fileIO' this table is
not valid.
          
This table is controlled via the 
rttMonCtrlAdminTable.  Entries in this table are
created via the rttMonCtrlAdminStatus object.

rttMonFileIOAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.3.1

A list of objects that define specific configuration for
'fileIO' RttMonRttType conceptual Rtt control rows.

Indexes

rttMonCtrlAdminIndex

Column	Syntax	OID
rttMonFileIOAdminFilePathobsolete The fully qualified file path that will be the target of the RTT operation. This value must match one of the rttMonApplPreConfigedName entries.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.3.1.1
rttMonFileIOAdminSizeobsolete The size of the file to write/read from the File Server.	bytesEnumerationr/w Enumerated Values: 1 n256 2 n1k 3 n64k 4 n128k 5 n256k	.1.3.6.1.4.1.9.9.42.1.2.3.1.2
rttMonFileIOAdminActionobsolete The File I/O action to be performed.	Enumerationr/w Enumerated Values: 1 write 2 read 3 writeRead	.1.3.6.1.4.1.9.9.42.1.2.3.1.3

A table of Round Trip Time (RTT) monitoring 'script'
specific definitions.
          
When the RttMonRttType is not 'script' this table is
not valid.
          
This table is controlled via the
rttMonCtrlAdminTable.  Entries in this table are
created via the rttMonCtrlAdminStatus object.

rttMonScriptAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.4.1

A list of objects that define specific configuration for
'script' RttMonRttType conceptual Rtt control rows.

Indexes

rttMonCtrlAdminIndex

Column	Syntax	OID
rttMonScriptAdminNameobsolete This will be the Name of the Script that will be used to generate RTT operations. This object must match one of the rttMonApplPreConfigedName entries.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.4.1.1
rttMonScriptAdminCmdLineParamsobsolete This will be the actual command line parameters passed to the rttMonScriptAdminName when being executed.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.4.1.2

A table of Round Trip Time (RTT) monitoring scheduling
specific definitions.
          
This table is controlled via the
rttMonCtrlAdminTable.  Entries in this table are
created via the rttMonCtrlAdminStatus object.

rttMonScheduleAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.5.1

A list of objects that define specific configuration for
the scheduling of RTT operations.

Indexes

No indexes recorded

Column	Syntax	OID
rttMonScheduleAdminRttLife This object value will be placed into the rttMonCtrlOperRttLife object when the rttMonCtrlOperState object transitions to 'active' or 'pending'. The value 2147483647 has a special meaning. When this obje…	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.5.1.1
rttMonScheduleAdminRttStartTime This is the time when this conceptional row will activate. This is the value of MIB-II's sysUpTime in the future. When sysUpTime equals this value this object will cause the activation of a conceptual …	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.42.1.2.5.1.2
rttMonScheduleAdminConceptRowAgeoutdeprecated The amount of time this conceptual Rtt control row will exist when not in an 'active' rttMonCtrlOperState. When this conceptual Rtt control row enters an 'active' state, this timer will be reset and susp…	secondsInteger32r/w Constraints: range: 0-2073600	.1.3.6.1.4.1.9.9.42.1.2.5.1.3
rttMonScheduleAdminRttRecurring When set to true, this entry will be scheduled to run automatically for the specified duration equal to the life configured, at the same time daily. This value cannot be set to true (a) if rttMonSchedule…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.5.1.4
rttMonScheduleAdminConceptRowAgeoutV2 The amount of time this conceptual Rtt control row will exist when not in an 'active' rttMonCtrlOperState. When this conceptual Rtt control row enters an 'active' state, this timer will be reset and suspe…	secondsInteger32r/w Constraints: range: 0-2073600	.1.3.6.1.4.1.9.9.42.1.2.5.1.5
rttMonScheduleAdminStartType This object specifies the start-time option to be used for scheduling the start time of RTT operation. The following list defines the start-time options that can be configured for the probe: pending(1) …	CISCO-RTTMON-TC-MIBRttMonScheduleStartTyper/w Type Values: 1 pending 2 now 3 random 4 after 5 specific	.1.3.6.1.4.1.9.9.42.1.2.5.1.6
rttMonScheduleAdminStartDelay This object specifies the start time delay range in milliseconds. The value of this object is only effective with rttMonScheduleAdminStartType value. For rttMonScheduleAdminStartType with random option, a…	Integer32r/w Constraints: range: 500-10000	.1.3.6.1.4.1.9.9.42.1.2.5.1.7

A table of Round Trip Time (RTT) monitoring statistics
definitions. 
          
The definitions in this table control what and how many
entries will be placed into the rttMonStatsCaptureTable.
          
The statistics capture table is a rollover table.  When 
the rttMonStatisticsAdminNumHourGroups index value 
exceeds its value defined in this table, the oldest 
corresponding group will be deleted and will be replaced 
with the new group.  All other indices will only fill to 
there maximum size.
          
NOTE:  The maximum size of this table is defined to be
       the product of the rttMonCtrlAdminIndex times
       rttMonStatisticsAdminNumHourGroups times
       rttMonStatisticsAdminNumPaths times
       rttMonStatisticsAdminNumHops times
       rttMonStatisticsAdminNumDistBuckets. 
          
NOTE WELL:  Each of the 'Num' objects values in this 
            have a special behavior.  When one of the
            objects is set to a value larger than the
            Rtt application can support the set will
            succeed, but the resultant value will
            be set to the applications maximum value. 
            The setting management station must reread
            this object to verify the actual value.
          
This table augments the rttMonCtrlAdminTable.

rttMonStatisticsAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.7.1

A list of objects that define RTT statistics
capture operations.

Indexes

No indexes recorded

Column	Syntax	OID
rttMonStatisticsAdminNumHourGroups The maximum number of groups of paths to record. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the group will close and immedi…	Integer32r/w Constraints: range: 0-25	.1.3.6.1.4.1.9.9.42.1.2.7.1.1
rttMonStatisticsAdminNumPaths When RttMonRttType is 'pathEcho' this is the maximum number of statistics paths to record per hourly group. This value directly represents the path to a target. For all other RttMonRttTypes this value will be force…	Integer32r/w Constraints: range: 1-128	.1.3.6.1.4.1.9.9.42.1.2.7.1.2
rttMonStatisticsAdminNumHops When RttMonRttType is 'pathEcho' this is the maximum number of statistics hops to record per path group. This value directly represents the number of hops along a path to a target, thus we can only support 30 hops. …	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.9.9.42.1.2.7.1.3
rttMonStatisticsAdminNumDistBuckets The maximum number of statistical distribution Buckets to accumulate. Since this index does not rollover, only the first rttMonStatisticsAdminNumDistBuckets will be kept. The last rttMonSta…	Integer32r/w Constraints: range: 1-20	.1.3.6.1.4.1.9.9.42.1.2.7.1.4
rttMonStatisticsAdminDistInterval The statistical distribution buckets interval. Distribution Bucket Example: rttMonStatisticsAdminNumDistBuckets = 5 buckets rttMonStatisticsAdminDistInterval = 10 milliseconds …	millisecondsInteger32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.42.1.2.7.1.5

A table of Round Trip Time (RTT) monitoring history
definitions.
          
The definitions in this table control what and how many
entries will be placed into the 
rttMonHistoryCollectionTable.
          
The history collection table is a rollover table.  When 
the rttMonHistoryAdminNumLives index value exceeds its 
value defined in this table, the oldest corresponding 
'lives' group will be deleted and will be replaced with 
the new 'lives' group.  All other indices will only fill
to their maximum size.
          
NOTE:  The maximum size of this table is defined to be
       the product of the rttMonCtrlAdminIndex times
       rttMonHistoryAdminNumLives times
       rttMonHistoryAdminNumBuckets times
       rttMonHistoryAdminNumSamples.
          
NOTE WELL:  Each of the 'Num' objects values in this 
            have a special behavior.  When one of the
            objects is set to a value larger than the
            Rtt application can support the set will
            succeed, but the resultant value will
            be set to the applications maximum value. 
            The setting management station must reread
            this object to verify the actual value.
          
NOTE: this table is not applicable to http and jitter 
      probes

rttMonHistoryAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.8.1

A list of objects that define RTT history collection
operations.

Indexes

No indexes recorded

Column	Syntax	OID
rttMonHistoryAdminNumLives The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the rttMonCtrlOperRttLife object. A new life is created when the same conceptual RTT control row is restart…	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.9.9.42.1.2.8.1.1
rttMonHistoryAdminNumBuckets The maximum number of history buckets to record. When the RttMonRttType is 'pathEcho' this value directly represents a path to a target. For all other RttMonRttTypes this value should be set to the number of opera…	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.9.9.42.1.2.8.1.2
rttMonHistoryAdminNumSamples The maximum number of history samples to record per bucket. When the RttMonRttType is 'pathEcho' this value directly represents the number of hops along a path to a target, thus we can only support 30 hops. For all o…	Integer32r/w Constraints: range: 1-30	.1.3.6.1.4.1.9.9.42.1.2.8.1.3
rttMonHistoryAdminFilter Defines a filter for adding RTT results to the history buffer: none - no history is recorded all - the results of all completion times and failed completions are recor…	Enumerationr/w Enumerated Values: 1 none 2 all 3 overThreshold 4 failures	.1.3.6.1.4.1.9.9.42.1.2.8.1.4

A table of which contains the Operational values for the
probe, and the conceptual RTT control row. 
          
This table augments the rttMonCtrlAdminTable.

rttMonCtrlOperEntry row .1.3.6.1.4.1.9.9.42.1.2.9.1

A list of objects that describe the current state
of probe, and the conceptual RTT control row.

Indexes

No indexes recorded

Column	Syntax	OID
rttMonCtrlOperModificationTime This object is updated whenever an object in the conceptual RTT control row is changed or updated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.42.1.2.9.1.1
rttMonCtrlOperDiagText A string which can be used as an aid in tracing problems. The content of this field will depend on the type of target (rttMonEchoAdminProtocol). When rttMonEchoAdminProtocol is one of snaLU0EchoAppl, or…	OctetString Constraints: range: 0-51	.1.3.6.1.4.1.9.9.42.1.2.9.1.2
rttMonCtrlOperResetTime This object is set when the rttMonCtrlOperState is set to reset.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.42.1.2.9.1.3
rttMonCtrlOperOctetsInUse This object is the number of octets currently in use by this composite conceptual RTT row. A composite conceptual row include the control, statistics, and history conceptual rows combined. (All octets that are addres…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.42.1.2.9.1.4
rttMonCtrlOperConnectionLostOccurred This object will only change its value when the RttMonRttType is 'echo' or 'pathEcho'. This object is set to true when the RTT connection fails to be established or is lost, and set to false when a conn…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.9.1.5
rttMonCtrlOperTimeoutOccurred This object will change its value for all RttMonRttTypes. This object is set to true when an operation times out, and set to false when an operation completes under rttMonCtrlAdminTimeout. When this va…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.9.1.6
rttMonCtrlOperOverThresholdOccurred This object will change its value for all RttMonRttTypes. This object is changed by operation completion times over threshold, as defined by rttMonReactAdminThresholdType. When this value changes, a rea…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.9.1.7
rttMonCtrlOperNumRtts This is the total number of probe operations that have been attempted. This value is incremented for each start of an RTT operation. Thus when rttMonCtrlAdminRttType is set to 'pathEcho' or 'pathJit…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.9.1.8
rttMonCtrlOperRttLife This object is decremented every second, until it reaches zero. When the value of this object is zero RTT operations for this row are suspended. This object will either reach zero by a countdown or it will transitio…	secondsInteger32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.9.1.9
rttMonCtrlOperState The RttMonOperStatus object is used to manage the 'state' of the probe that is implementing conceptual RTT control row. This status object has six defined values: reset(1) - reset…	Enumerationr/w Enumerated Values: 1 reset 2 orderlyStop 3 immediateStop 4 pending 5 inactive 6 active 7 restart	.1.3.6.1.4.1.9.9.42.1.2.9.1.10
rttMonCtrlOperVerifyErrorOccurred This object is true if rttMonCtrlAdminVerifyData is set to true and data corruption occurs.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.9.1.11

A table of which contains the status of latest RTT
operation. 
          
When the RttMonRttType is 'pathEcho', operations 
performed to the hops along the path will be recorded
in this table.
          
This table augments the RTT definition table, 
rttMonCtrlAdminTable.

rttMonLatestRttOperEntry row .1.3.6.1.4.1.9.9.42.1.2.10.1

A list of objects that record the latest RTT operation.

Indexes

No indexes recorded

Column	Syntax	OID
rttMonLatestRttOperCompletionTime The completion time of the latest RTT operation successfully completed. The unit of this object will be microsecond when rttMonCtrlAdminRttType is set to 'jitter' and rttMonEchoAdminPrecision is set to '…	milliseconds/microsecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.42.1.2.10.1.1
rttMonLatestRttOperSense A sense code for the completion status of the latest RTT operation.	CISCO-RTTMON-TC-MIBRttResponseSense Type Values: 0 other 1 ok 2 disconnected 3 overThreshold 4 timeout 5 busy 6 notConnected 7 dropped 8 sequenceError 9 verifyError 10 applicationSpecific 11 dnsServerTimeout 12 tcpConnectTimeout 13 httpTransactionTimeout 14 dnsQueryError 15 httpError 16 error 17 mplsLspEchoTxError 18 mplsLspUnreachable 19 mplsLspMalformedReq 20 mplsLspReachButNotFEC 21 enableOk 22 enableNoConnect 23 enableVersionFail 24 enableInternalError 25 enableAbort 26 enableFail 27 enableAuthFail 28 enableFormatError 29 enablePortInUse 30 statsRetrieveOk 31 statsRetrieveNoConnect 32 statsRetrieveVersionFail 33 statsRetrieveInternalError 34 statsRetrieveAbort 35 statsRetrieveFail 36 statsRetrieveAuthFail 37 statsRetrieveFormatError 38 statsRetrievePortInUse	.1.3.6.1.4.1.9.9.42.1.2.10.1.2
rttMonLatestRttOperApplSpecificSense An application specific sense code for the completion status of the latest RTT operation. This object will only be valid when the rttMonLatestRttOperSense object is set to 'applicationSpecific'. Otherwise, this obj…	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.10.1.3
rttMonLatestRttOperSenseDescription A sense description for the completion status of the latest RTT operation when the rttMonLatestRttOperSense object is set to 'applicationSpecific'.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.10.1.4
rttMonLatestRttOperTime The value of the agent system time at the time of the latest RTT operation.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.42.1.2.10.1.5
rttMonLatestRttOperAddress When the RttMonRttType is 'echo', 'pathEcho', 'pathJitter', 'udpEcho', 'tcpConnect', 'dns' and 'dlsw' this is a string which specifies the address of the target for this RTT operation. When the RttMonRttType is not o…	CISCO-RTTMON-TC-MIBRttMonTargetAddress	.1.3.6.1.4.1.9.9.42.1.2.10.1.6

A table of which contains the list of conceptual RTT
control rows that will start to collect data when a 
reaction condition is violated and when 
rttMonReactAdminActionType is set to one of the 
following:
  -  triggerOnly
  -  trapAndTrigger
  -  nmvtAndTrigger
  -  trapNmvtAndTrigger
or when a reaction condition is violated and when any of the
row in rttMonReactTable has rttMonReactActionType as one of
the following:
  - triggerOnly
  - trapAndTrigger
          
The goal of this table is to define one or more 
additional conceptual RTT control rows that will become
active and start to collect additional history and
statistics (depending on the rows configuration values),
when a problem has been detected.
          
If the conceptual RTT control row is undefined, and a 
trigger occurs, no action will take place.  
          
If the conceptual RTT control row is scheduled to start 
at a later time, triggering that row will have no effect.
          
If the conceptual RTT control row is currently active, 
triggering that row will have no effect on that row, but 
the rttMonReactTriggerOperState object will transition to 
'active'.
          
An entry in this table can only be triggered when
it is not currently in a triggered state.  The
object rttMonReactTriggerOperState will 
reflect the state of each entry in this table.

rttMonReactTriggerAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.11.1

A list of objects that will be triggered when
a reaction condition is violated.

Indexes

rttMonCtrlAdminIndex rttMonReactTriggerAdminRttMonCtrlAdminIndex

Column	Syntax	OID
rttMonReactTriggerAdminRttMonCtrlAdminIndex This object points to a single conceptual Rtt control row. If this row does not exist and this value is triggered no action will result. The conceptual Rtt control row will be triggered for the rttMonC…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.42.1.2.11.1.1
rttMonReactTriggerAdminStatus This object is used to create Trigger entries.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.42.1.2.11.1.2

A table of which contains the operational state
of each entry in the 
rttMonReactTriggerAdminTable.
          
This table augments the RTT trigger 
definition table, rttMonReactTriggerAdminTable.

rttMonReactTriggerOperEntry row .1.3.6.1.4.1.9.9.42.1.2.12.1

A list of state objects for the
rttMonReactTriggerAdminTable.

Indexes

No indexes recorded

Column	Syntax	OID
rttMonReactTriggerOperState This object takes on the value active when its associated entry in the rttMonReactTriggerAdminTable has been triggered. When the associated entry in the rttMonReactTriggerAdminTable is not under a trigge…	Enumeration Enumerated Values: 1 active 2 pending	.1.3.6.1.4.1.9.9.42.1.2.12.1.1

A table to store the hop addresses in a Loose Source Routing
path. Response times are computed along the specified path
using ping.
          
This maximum table size is limited by the size of the 
maximum number of hop addresses that can fit in an IP header,
which is 8. The object rttMonEchoPathAdminEntry will reflect 
this tables maximum number of entries.
          
This table is coupled with rttMonCtrlAdminStatus.

rttMonEchoPathAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.13.1

A list of objects that define intermediate hop's IP Address.

This entry can be added only if the rttMonCtrlAdminRttType is
'echo'. The entry gets deleted when the corresponding RTR entry,
which has an index…

Indexes

rttMonCtrlAdminIndex rttMonEchoPathAdminHopIndex

Column	Syntax	OID
rttMonEchoPathAdminHopIndex Uniquely identifies a row in the rttMonEchoPathAdminTable. This number represents the hop address number in a specific ping path. All the indicies should start from 1 and must be contiguous ie., entries should be (sa…	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.9.9.42.1.2.13.1.1
rttMonEchoPathAdminHopAddress A string which specifies the address of an intermediate hop's IP Address for a RTT 'echo' operation	CISCO-RTTMON-TC-MIBRttMonTargetAddressr/w	.1.3.6.1.4.1.9.9.42.1.2.13.1.2

A table of Round Trip Time (RTT) monitoring group scheduling
specific definitions.
This table is used to create a conceptual group scheduling
control row. The entries in this control row contain objects
used to define group schedule configuration parameters.
          
The objects of this table will be used to schedule a group of
probes identified by the conceptual rows of the
rttMonCtrlAdminTable.

rttMonGrpScheduleAdminEntry row .1.3.6.1.4.1.9.9.42.1.2.14.1

A list of objects that define a conceptual group scheduling
control row.

Indexes

rttMonGrpScheduleAdminIndex

Column	Syntax	OID
rttMonGrpScheduleAdminIndex Uniquely identifies a row in the rttMonGrpScheduleAdminTable. This is a pseudo-random number selected by the management station when creating a row via the rttMonGrpScheduleAdminStatus object. If the pseu…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.42.1.2.14.1.1
rttMonGrpScheduleAdminProbes A string which holds the different probes which are to be group scheduled. The probes can be specified in the following forms. (a) Individual ID's with comma separated as 23,45,34. (b) Range form including hyphens with …	OctetStringr/w Constraints: range: 0-200	.1.3.6.1.4.1.9.9.42.1.2.14.1.2
rttMonGrpScheduleAdminPeriod Specifies the time duration over which all the probes have to be scheduled.	secondsInteger32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.9.9.42.1.2.14.1.3
rttMonGrpScheduleAdminFrequency Specifies the duration between initiating each RTT operation for all the probes specified in the group. The value of this object is only effective when both rttMonGrpScheduleAdminFreqMax and rttMonGrpSche…	secondsInteger32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.9.9.42.1.2.14.1.4
rttMonGrpScheduleAdminLife This object specifies the life of all the probes included in the object rttMonGrpScheduleAdminProbes, that are getting group scheduled. This value will be placed into rttMonScheduleAdminRttLife object for each of the pr…	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.14.1.5
rttMonGrpScheduleAdminAgeout This object specifies the ageout value of all the probes included in the object rttMonGrpScheduleAdminProbes, that are getting group scheduled. This value will be placed into rttMonScheduleAdminConceptRowAgeout object f…	secondsInteger32r/w Constraints: range: 0-2073600	.1.3.6.1.4.1.9.9.42.1.2.14.1.6
rttMonGrpScheduleAdminStatus The status of the conceptual RTT group schedule control row. In order for this object to become active, the following row objects must be defined: - rttMonGrpScheduleAdminProbes - rttMonGrpScheduleAdmin…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.42.1.2.14.1.7
rttMonGrpScheduleAdminFreqMax Specifies the max duration between initiating each RTT operation for all the probes specified in the group. If this is 0 and rttMonGrpScheduleAdminFreqMin is also 0 then rttMonGrpScheduleAdminFrequency be…	secondsInteger32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.9.9.42.1.2.14.1.8
rttMonGrpScheduleAdminFreqMin Specifies the min duration between initiating each RTT operation for all the probes specified in the group. The value of this object cannot be greater than the value of rttMonGrpScheduleAdminFreqMax. …	secondsInteger32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.9.9.42.1.2.14.1.9
rttMonGrpScheduleAdminStartTime This is the time in seconds after which the member probes of this group specified in rttMonGrpScheduleAdminProbes will transition to active state If rttMonScheduleAdminStartType is specified with this obj…	secondsInteger32r/w Constraints: range: 0-604800	.1.3.6.1.4.1.9.9.42.1.2.14.1.10
rttMonGrpScheduleAdminAdd Addition of members to an existing group will be allowed if this object is set to TRUE (1). The members, IDs of which are mentioned in rttMonGrpScheduleAdminProbes object are added to the existing group	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.14.1.11
rttMonGrpScheduleAdminDelete Removal of members from an existing group will be allowed if this object is set to TRUE (1). The members, IDs of which are mentioned in rttMonGrpScheduleAdminProbes object are removed from the existing group	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.14.1.12
rttMonGrpScheduleAdminReset When this is set to true then all members of this group will be stopped and rescheduled using the previously set values of this group.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.14.1.13
rttMonGrpScheduleAdminStartType This object specifies the start-time option to be used for scheduling the start time of the group with probes included in the object rttMonGrpScheduleAdminProbes. The following list defines the start-time…	CISCO-RTTMON-TC-MIBRttMonScheduleStartTyper/w Type Values: 1 pending 2 now 3 random 4 after 5 specific	.1.3.6.1.4.1.9.9.42.1.2.14.1.14
rttMonGrpScheduleAdminStartDelay This object specifies the start time delay range in milliseconds. The value of this object is only effective with rttMonScheduleAdminStartType value. For rttMonGrpScheduleAdminStartType with random option…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.42.1.2.14.1.15

A table of Auto SAA L3 MPLS VPN definitions.
          
The Auto SAA L3 MPLS VPN administration control is in multiple
tables.
          
This first table, is used to create a conceptual Auto SAA L3
MPLS VPN control row.  The following tables contain objects
which used in type specific configurations, scheduling and
reaction configurations. All of these tables will create the
same conceptual control row as this table using this table's
index as their own index.
          
In order to a row in this table to become active the following
objects must be defined.
  rttMplsVpnMonCtrlRttType,
  rttMplsVpnMonCtrlVrfName and
  rttMplsVpnMonSchedulePeriod.

rttMplsVpnMonCtrlEntry row .1.3.6.1.4.1.9.9.42.1.2.15.1

A base list of objects that define a conceptual Auto SAA L3
MPLS VPN control row.

Indexes

rttMplsVpnMonCtrlIndex

Column	Syntax	OID
rttMplsVpnMonCtrlIndex Uniquely identifies a row in the rttMplsVpnMonCtrlTable. This is a pseudo-random number selected by the management station when creating a row via the rttMplsVpnMonCtrlStatus object. If the…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.42.1.2.15.1.1
rttMplsVpnMonCtrlRttType The type of RTT operation to be performed for Auto SAA L3 MPLS VPN. This value must be set in the same PDU of rttMplsVpnMonCtrlStatus. This value must be set before setting any other parame…	CISCO-RTTMON-TC-MIBRttMplsVpnMonRttTyper/w Type Values: 1 jitter 2 echo 3 pathEcho	.1.3.6.1.4.1.9.9.42.1.2.15.1.2
rttMplsVpnMonCtrlVrfName This field is used to specify the VPN name for which the Auto SAA L3 MPLS VPN RTT operation will be used. This value must be set in the same PDU of rttMplsVpnMonCtrlStatus. The Auto SAA L3 …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.42.1.2.15.1.3
rttMplsVpnMonCtrlTag A string which is used by a managing application to identify the RTT target. This string will be configured as rttMonCtrlAdminTag for all the operations configured by this Auto SAA L3 MPLS VPN. …	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.42.1.2.15.1.4
rttMplsVpnMonCtrlThreshold This object defines an administrative threshold limit. This value will be configured as rttMonCtrlAdminThreshold for all the operations that will be configured by the current Auto SAA L3 MPLS VPN. …	millisecondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.15.1.5
rttMplsVpnMonCtrlTimeout Specifies the duration to wait for a RTT operation configured automatically by the Auto SAA L3 MPLS VPN to complete. The value of this object cannot be set to a value which would specify a duration excee…	millisecondsInteger32r/w Constraints: range: 0-604800000	.1.3.6.1.4.1.9.9.42.1.2.15.1.6
rttMplsVpnMonCtrlScanInterval Specifies the frequency at which the automatic PE addition should take place if there is any for an Auto SAA L3 MPLS VPN. New RTT operations corresponding to the new PEs discovered will be created and sch…	minutesInteger32r/w Constraints: range: 1-70560	.1.3.6.1.4.1.9.9.42.1.2.15.1.7
rttMplsVpnMonCtrlDelScanFactor Specifies the frequency at which the automatic PE deletion should take place. This object specifies the number of times of rttMonMplslmCtrlScanInterval (rttMplsVpnMonCtrlDelScanFactor * rttMplsVpnMonCtrlS…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.15.1.8
rttMplsVpnMonCtrlEXP This object represents the EXP value that needs to be put as precedence bit of an IP header.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.9.42.1.2.15.1.9
rttMplsVpnMonCtrlRequestSize This object represents the native payload size that needs to be put on the packet. This value will be configured as rttMonEchoAdminPktDataRequestSize for all the RTT operations configured by the current A…	octetsInteger32r/w Constraints: range: 0-16384	.1.3.6.1.4.1.9.9.42.1.2.15.1.10
rttMplsVpnMonCtrlVerifyData When set to true, the resulting data in each RTT operation created by the current Auto SAA L3 MPLS VPN is compared with the expected data. This includes checking header information (if possible) and exact packet size. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.15.1.11
rttMplsVpnMonCtrlStorageType The storage type of this conceptual row. When set to 'nonVolatile', this entry will be shown in 'show running' command and can be saved into Non-volatile memory. By Default the entry will not be saved int…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.42.1.2.15.1.12
rttMplsVpnMonCtrlProbeList This object holds the list of probes ID's that are created by the Auto SAA L3 MPLS VPN. The probes will be specified in the following form. (a) Individual ID's with comma separated as 1,5,3. (b) Range for…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.15.1.13
rttMplsVpnMonCtrlStatus The status of the conceptual Auto SAA L3 MPLS VPN control row. In order for this object to become active rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and rttMplsVpnMonSchedulePeriod objects must b…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.42.1.2.15.1.14
rttMplsVpnMonCtrlLpd When set to true, this implies that LPD (LSP Path Discovery) is enabled for this row. The Auto SAA L3 MPLS VPN will find all the paths to each of the PE's and configure RTT operation with rttMonCtrlAdminR…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.15.1.15
rttMplsVpnMonCtrlLpdGrpList This object holds the list of LPD Group IDs that are created for this Auto SAA L3 MPLS VPN row. This object will be applicable only when LSP Path Discovery is enabled for this row. The LPD …	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.42.1.2.15.1.16
rttMplsVpnMonCtrlLpdCompTime The completion time of the LSP Path Discovery for the entire set of PEs which are discovered for this Auto SAA. This object will be applicable only when LSP Path Discovery is enabled for this row.	minutesInteger32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.42.1.2.15.1.17

A table that contains Auto SAA L3 MPLS VPN configured RTT
operation specific definitions.
          
This table is controlled via the rttMplsVpnMonCtrlTable.
Entries in this table are created via the
rttMplsVpnMonCtrlStatus object.

rttMplsVpnMonTypeEntry row .1.3.6.1.4.1.9.9.42.1.2.16.1

A list of objects that define RTT operation specific
configuration for an Auto SAA L3 MPLS VPN.

Indexes

No indexes recorded

Column	Syntax	OID
rttMplsVpnMonTypeInterval This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only. The usage of this value …	millisecondsInteger32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.9.9.42.1.2.16.1.1
rttMplsVpnMonTypeNumPackets This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only. The usage of this value in RTT opera…	Integer32r/w Constraints: range: 1-60000	.1.3.6.1.4.1.9.9.42.1.2.16.1.2
rttMplsVpnMonTypeDestPort This object represents the target's port number to which the packets need to be sent. This value will be configured as target port for all the operations that is going to be configured The…	Integer32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.9.9.42.1.2.16.1.3
rttMplsVpnMonTypeSecFreqType This object specifies the reaction type for which the rttMplsVpnMonTypeSecFreqValue should be applied. The Value 'timeout' will cause secondary frequency to be set for frequency on timeout condition. …	Enumerationr/w Enumerated Values: 1 none 2 timeout 3 connectionLoss 4 both	.1.3.6.1.4.1.9.9.42.1.2.16.1.4
rttMplsVpnMonTypeSecFreqValue This object represents the value that needs to be applied to secondary frequency of individual RTT operations configured by Auto SAA L3 MPLS VPN. Setting rttMplsVpnMonTypeSecFreqValue without setting rttM…	Integer32r/w Constraints: range: 1-604800	.1.3.6.1.4.1.9.9.42.1.2.16.1.5
rttMplsVpnMonTypeLspSelector A string which specifies the address of the local host (127.X.X.X). This object will be used as lsp-selector in MPLS RTT operations configured by the Auto SAA L3 MPLS VPN. When LSP Path Dis…	OctetStringr/w	.1.3.6.1.4.1.9.9.42.1.2.16.1.6
rttMplsVpnMonTypeLSPReplyMode This object specifies the reply mode for the LSP Echo requests originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently used by echo and pathEcho.	CISCO-RTTMON-TC-MIBRttMonLSPPingReplyModer/w Type Values: 1 replyIpv4Udp 2 replyIpv4UdpRA	.1.3.6.1.4.1.9.9.42.1.2.16.1.7
rttMplsVpnMonTypeLSPTTL This object represents the TTL setting for MPLS echo request packets originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently used by echo and pathEcho. …	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.42.1.2.16.1.8
rttMplsVpnMonTypeLSPReplyDscp This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in range of DiffServ codepoint values between 0 to 63. Note: This object cann…	Integer32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.9.9.42.1.2.16.1.9
rttMplsVpnMonTypeLpdMaxSessions This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for discovery of all the paths to the target i…	Integer32r/w Constraints: range: 1-15	.1.3.6.1.4.1.9.9.42.1.2.16.1.10
rttMplsVpnMonTypeLpdSessTimeout This object specifies the maximum allowed duration of a particular tree trace request. If no response is received in configured time the request will be considered a failure.	secondsInteger32r/w Constraints: range: 1-900	.1.3.6.1.4.1.9.9.42.1.2.16.1.11
rttMplsVpnMonTypeLpdEchoTimeout This object specifies the timeout value for the LSP echo requests which are sent while performing the LSP Path Discovery.	millisecondsInteger32r/w Constraints: range: 0-604800000	.1.3.6.1.4.1.9.9.42.1.2.16.1.12
rttMplsVpnMonTypeLpdEchoInterval This object specifies the send interval between LSP echo requests which are sent while performing the LSP Path Discovery.	millisecondsInteger32r/w Constraints: range: 0-3600000	.1.3.6.1.4.1.9.9.42.1.2.16.1.13
rttMplsVpnMonTypeLpdEchoNullShim This object specifies if the explicit-null label is added to LSP echo requests which are sent while performing the LSP Path Discovery. If set to TRUE all the probes configured as part of this control row …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.16.1.14
rttMplsVpnMonTypeLpdScanPeriod This object specifies the scan time for the completion of LSP Path Discovery for all the PEs discovered for this control row. If the scan period is exceeded on completion of the LSP Path Discovery for all the PEs, the n…	minutesInteger32r/w Constraints: range: 0-7200	.1.3.6.1.4.1.9.9.42.1.2.16.1.15
rttMplsVpnMonTypeLpdStatHours The maximum number of hours of data to be kept per LPD group. The LPD group statistics will be kept in an hourly bucket. At the maximum there can be two buckets. The value of 'one' is not advisable because the group wil…	Integer32r/w Constraints: range: 0-2	.1.3.6.1.4.1.9.9.42.1.2.16.1.16

A table of Auto SAA L3 MPLS VPN monitoring scheduling
specific definitions.
          
This table is controlled via the rttMplsVpnMonCtrlTable.
Entries in this table are created via the
rttMplsVpnMonCtrlStatus object.

rttMplsVpnMonScheduleEntry row .1.3.6.1.4.1.9.9.42.1.2.17.1

A list of objects that define specific configuration for
the scheduling of RTT operations.

Indexes

No indexes recorded

Column	Syntax	OID
rttMplsVpnMonScheduleRttStartTime This is the time when this conceptual row will activate. rttMplsVpnMonSchedulePeriod object must be specified before setting this object. This is the value of MIB-II's sysUpTime in the future. When sysUpT…	SNMPv2-SMITimeTicksr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.42.1.2.17.1.1
rttMplsVpnMonSchedulePeriod Specifies the time duration over which all the probes created by the current Auto SAA L3 MPLS VPN have to be scheduled. This object must be set first before setting rttMplsVpnMonScheduleRttStartTime.	secondsInteger32r/w Constraints: range: 1-604800	.1.3.6.1.4.1.9.9.42.1.2.17.1.2
rttMplsVpnMonScheduleFrequency Specifies the duration between initiating each RTT operation configured by the Auto SAA L3 MPLS VPN. This object cannot be set to a value which would be a shorter duration than rttMplsVpnMonCtrlTimeout. …	secondsInteger32r/w Constraints: range: 1-604800	.1.3.6.1.4.1.9.9.42.1.2.17.1.3

A Table of Auto SAA L3 MPLS VPN Notification definitions.
          
This table augments the rttMplsVpnMonCtrlTable.

rttMplsVpnMonReactEntry row .1.3.6.1.4.1.9.9.42.1.2.18.1

A list of objects that define Auto SAA L3 MPLS VPN reaction
configuration.

Indexes

No indexes recorded

Column	Syntax	OID
rttMplsVpnMonReactConnectionEnable The value set for this will be applied as rttMonReactAdminConnectionEnable for individual probes created by the Auto SAA L3 MPLS VPN. When this object is set to true, rttMonReactVar for individual probes …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.18.1.1
rttMplsVpnMonReactTimeoutEnable The value set for this will be applied as rttMonReactAdminTimeoutEnable for individual probes created by the Auto SAA L3 MPLS VPN. When this object is set to true, rttMonReactVar for individual probes cre…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.18.1.2
rttMplsVpnMonReactThresholdType The value corresponding to this object will be applied as rttMonReactAdminThresholdType for individual probes created by the Auto SAA L3 MPLS VPN. The value corresponding to this object will be applied as…	Enumerationr/w Enumerated Values: 1 never 2 immediate 3 consecutive	.1.3.6.1.4.1.9.9.42.1.2.18.1.3
rttMplsVpnMonReactThresholdCount This object value will be applied as rttMonReactAdminThresholdCount for individual probes created by the Auto SAA L3 MPLS VPN. This object value will be applied as rttMonReactThresholdCountX for individua…	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.9.9.42.1.2.18.1.4
rttMplsVpnMonReactActionType The value corresponding to this object will be applied as rttMonReactAdminActionType of individual probes created by this Auto SAA L3 MPLS VPN. The value corresponding to this object will be applied as rt…	Enumerationr/w Enumerated Values: 1 none 2 trapOnly	.1.3.6.1.4.1.9.9.42.1.2.18.1.5
rttMplsVpnMonReactLpdNotifyType This object specifies the type of LPD notifications to be generated for the current Auto SAA L3 MPLS VPN control row. This object will be applicable only when LSP Path Discovery is enabled for this row. …	Enumerationr/w Enumerated Values: 1 none 2 lpdPathDiscovery 3 lpdGroupStatus 4 lpdAll	.1.3.6.1.4.1.9.9.42.1.2.18.1.6
rttMplsVpnMonReactLpdRetryCount This object value specifies the number of attempts to be performed before declaring the path as 'down'. Each 'single probe' which is part of 'lspGroup' probe will be retried these many times before marking it as 'down'.…	attemptsInteger32r/w Constraints: range: 1-16	.1.3.6.1.4.1.9.9.42.1.2.18.1.7

A table that contains the reaction configurations. Each
conceptual row in rttMonReactTable corresponds to a reaction
configured for the probe defined in rttMonCtrlAdminTable.
          
For each reaction configured for a probe there is an entry in
the table.
          
Each Probe can have multiple reactions and hence there can be
multiple rows for a particular probe.
          
This table is coupled with rttMonCtrlAdminTable.

rttMonReactEntry row .1.3.6.1.4.1.9.9.42.1.2.19.1

A base list of objects that define a conceptual reaction
configuration control row.

Indexes

rttMonCtrlAdminIndex rttMonReactConfigIndex

Column	Syntax	OID
rttMonReactConfigIndex This object along with rttMonCtrlAdminIndex identifies a particular reaction-configuration for a particular probe. This is a pseudo-random number selected by the management station when creating a row via the rttMonReac…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.9.42.1.2.19.1.1
rttMonReactVar This object specifies the type of reaction configured for a probe. The reaction types 'rtt', 'timeout', and 'connectionLoss' can be configured for all probe types. The reaction type 'verif…	CISCO-RTTMON-TC-MIBRttMonReactVarr/w Type Values: 1 rtt 2 jitterSDAvg 3 jitterDSAvg 4 packetLossSD 5 packetLossDS 6 mos 7 timeout 8 connectionLoss 9 verifyError 10 jitterAvg 11 icpif 12 packetMIA 13 packetLateArrival 14 packetOutOfSequence 15 maxOfPositiveSD 16 maxOfNegativeSD 17 maxOfPositiveDS 18 maxOfNegativeDS 19 iaJitterDS 20 frameLossDS 21 mosLQDS 22 mosCQDS 23 rFactorDS 24 successivePacketLoss 25 maxOfLatencyDS 26 maxOfLatencySD 27 latencyDSAvg 28 latencySDAvg 29 packetLoss 30 iaJitterSD 31 mosCQSD 32 rFactorSD 33 lpdGroup 34 lpdTreeTrace 35 lpdAll 36 unavailSD 37 unavailDS 38 pktLossPctSD 39 pktLossPctDS 40 rttPct 41 maxOfLatencySDPct 42 maxOfLatencyDSPct 43 latencySDAvgPct 44 latencyDSAvgPct 45 jitterSDAvgPct 46 jitterDSAvgPct 47 jitterAvgPct 48 overThreshold 49 protocolSpecificError	.1.3.6.1.4.1.9.9.42.1.2.19.1.2
rttMonReactThresholdType This object specifies the conditions under which the notification ( trap ) is sent. never - rttMonReactOccurred is never set immediate - rttMonReactOccurred is set to 'true' when th…	Enumerationr/w Enumerated Values: 1 never 2 immediate 3 consecutive 4 xOfy 5 average	.1.3.6.1.4.1.9.9.42.1.2.19.1.3
rttMonReactActionType Specifies what type(s), if any, of reaction(s) to generate if an operation violates one of the watched ( reaction-configuration ) conditions: none - no reaction is generated trapOnly …	Enumerationr/w Enumerated Values: 1 none 2 trapOnly 3 triggerOnly 4 trapAndTrigger	.1.3.6.1.4.1.9.9.42.1.2.19.1.4
rttMonReactThresholdRising This object defines the higher threshold limit. If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises above this limit and if the condition specified in rttMonReactThresholdType are satisfied, a trap is generated.…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.19.1.5
rttMonReactThresholdFalling This object defines a lower threshold limit. If the value ( e.g rtt, jitterAvg, packetLossSD etc ) falls below this limit and if the conditions specified in rttMonReactThresholdType are satisfied, a trap is generated. …	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.19.1.6
rttMonReactThresholdCountX If rttMonReactThresholdType value is 'xOfy', this object defines the 'x' value. If rttMonReactThresholdType value is 'consecutive' this object defines the number of consecutive occurrences that needs thre…	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.9.9.42.1.2.19.1.7
rttMonReactThresholdCountY This object defines the 'y' value of the xOfy condition if rttMonReactThresholdType is 'xOfy'. For other values of rttMonReactThresholdType, this object is not applicable.	Integer32r/w Constraints: range: 1-16	.1.3.6.1.4.1.9.9.42.1.2.19.1.8
rttMonReactValue This object will be set when the configured threshold condition is violated as defined by rttMonReactThresholdType and holds the actual value that violated the configured threshold values. This object is …	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.42.1.2.19.1.9
rttMonReactOccurred This object is set to true when the configured threshold condition is violated as defined by rttMonReactThresholdType. It will be again set to 'false' if the condition reverses. This object is set to true…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.42.1.2.19.1.10
rttMonReactStatus This objects indicates the status of the conceptual RTT Reaction Control Row.Only CreateAndGo and destroy operations are permitted on the row. When this object moves to active state, the conceptual row h…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.42.1.2.19.1.11