rttMplsVpnMonTypeSecFreqType

CISCO-RTTMON-MIB · .1.3.6.1.4.1.9.9.42.1.2.16.1.4

Object

column r/w Enumeration

This object specifies the reaction type for which the
rttMplsVpnMonTypeSecFreqValue should be applied.
              
The Value 'timeout' will cause secondary frequency to be set
for frequency on timeout condition.
              
The Value 'connectionLoss' will cause secondary frequency to
be set for frequency on connectionloss condition.
              
The Value 'both' will cause secondary frequency to be set for
frequency on either of timeout/connectionloss condition.
              
Notifications must be configured on corresponding reaction type
in order to rttMplsVpnMonTypeSecFreqValue get effect.
              
When LSP Path Discovery is enabled for this row the following
rttMplsVpnMonReactLpdNotifyType notifications must be
configured in order to rttMplsVpnMonTypeSecFreqValue get effect.
  - 'lpdGroupStatus' or 'lpdAll'.
              
Since the Frequency of the operation changes the stats will be
collected in new bucket.
              
If any of the reaction type (timeout/connectionLoss) occurred
for an operation configured by this Auto SAA L3 MPLS VPN and
the following conditions are satisfied, the frequency of the
operation will be changed to rttMplsVpnMonTypeSecFreqValue.
              
  1) rttMplsVpnMonTypeSecFreqType is set for a reaction type
  (timeout/connectionLoss).
  2) A notification is configured for the same reaction type
  (timeout/connectionLoss).
              
When LSP Path Discovery is enabled for this row, if any of the
reaction type (timeout/connectionLoss) occurred for 'single
probes' configured by this Auto SAA L3 MPLS VPN and the
following conditions are satisfied, the secondary frequency
rttMplsVpnMonTypeSecFreqValue will be applied to the
'lspGroup' probe.
              
  1) rttMplsVpnMonTypeSecFreqType is set for a reaction type
  (timeout/connectionLoss/both).
  2) rttMplsVpnMonReactLpdNotifyType object must be set to
  value of 'lpdGroupStatus' or 'lpdAll'.
              
The frequency of the individual operations will be restored to
original frequency once the trap is sent.

Context

MIB: CISCO-RTTMON-MIB
OID: .1.3.6.1.4.1.9.9.42.1.2.16.1.4
Type: column
Access: readwrite
Status: current
Parent: rttMplsVpnMonTypeEntry
Table: rttMplsVpnMonTypeTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	timeout
`3`	connectionLoss
`4`	both

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rttMplsVpnMonTypeInterval This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.…	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.1`
rttMplsVpnMonTypeLpdMaxSessions This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for di…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.10`
rttMplsVpnMonTypeLpdSessTimeout This object specifies the maximum allowed duration of a particular tree trace request. If no response is received in configured time the request will be considered …	column	seconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.11`
rttMplsVpnMonTypeLpdEchoTimeout This object specifies the timeout value for the LSP echo requests which are sent while performing the LSP Path Discovery.	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.12`
rttMplsVpnMonTypeLpdEchoInterval This object specifies the send interval between LSP echo requests which are sent while performing the LSP Path Discovery.	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.13`
rttMplsVpnMonTypeLpdEchoNullShim This object specifies if the explicit-null label is added to LSP echo requests which are sent while performing the LSP Path Discovery. If set to TRUE all the probes…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.42.1.2.16.1.14`
rttMplsVpnMonTypeLpdScanPeriod This object specifies the scan time for the completion of LSP Path Discovery for all the PEs discovered for this control row. If the scan period is exceeded on completion of the L…	column	minutes Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.15`
rttMplsVpnMonTypeLpdStatHours The maximum number of hours of data to be kept per LPD group. The LPD group statistics will be kept in an hourly bucket. At the maximum there can be two buckets. The value of 'one…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.16`
rttMplsVpnMonTypeNumPackets This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only. …	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.2`
rttMplsVpnMonTypeDestPort This object represents the target's port number to which the packets need to be sent. This value will be configured as target port for all the operations that is go…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.3`
rttMplsVpnMonTypeSecFreqValue This object represents the value that needs to be applied to secondary frequency of individual RTT operations configured by Auto SAA L3 MPLS VPN. Setting rttMplsVpn…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.5`
rttMplsVpnMonTypeLspSelector A string which specifies the address of the local host (127.X.X.X). This object will be used as lsp-selector in MPLS RTT operations configured by the Auto SAA L3 MP…	column	OctetString	`.1.3.6.1.4.1.9.9.42.1.2.16.1.6`
rttMplsVpnMonTypeLSPReplyMode This object specifies the reply mode for the LSP Echo requests originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently used by…	column	CISCO-RTTMON-TC-MIBRttMonLSPPingReplyMode	`.1.3.6.1.4.1.9.9.42.1.2.16.1.7`
rttMplsVpnMonTypeLSPTTL This object represents the TTL setting for MPLS echo request packets originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently u…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.8`
rttMplsVpnMonTypeLSPReplyDscp This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in range of DiffServ codepoint values between 0 to 6…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.9`