rttMplsVpnMonTypeLpdScanPeriod

Object

column r/w minutes Integer32

This object specifies the scan time for the completion of LSP
Path Discovery for all the PEs discovered for this control row.
If the scan period is exceeded on completion of the LSP Path
Discovery for all the PEs, the next discovery will start
immediately else it will wait till expiry of scan period.
              
For example: If the value is set to 30 minutes then on start of
the LSP Path Discovery a timestamp will be taken say T1. At the
end of the tree trace discovery one more timestamp will be taken
again say T2. If (T2-T1) is greater than 30, the next discovery
will start immediately else next discovery  will wait for
[30 - (T2-T1)].
              
Note: If the object is set to a special value of '0', it will
force immediate start of the next discovery on all neighbours
without any delay.

Context

MIB: CISCO-RTTMON-MIB
OID: .1.3.6.1.4.1.9.9.42.1.2.16.1.15
Type: column
Access: readwrite
Status: current
Units: minutes
Parent: rttMplsVpnMonTypeEntry
Table: rttMplsVpnMonTypeTable
Siblings: 15

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rttMplsVpnMonTypeInterval This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.…	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.1`
rttMplsVpnMonTypeLpdMaxSessions This object represents the number of concurrent path discovery requests that will be active at one time per MPLS VPN control row. This object is meant for reducing the time for di…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.10`
rttMplsVpnMonTypeLpdSessTimeout This object specifies the maximum allowed duration of a particular tree trace request. If no response is received in configured time the request will be considered …	column	seconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.11`
rttMplsVpnMonTypeLpdEchoTimeout This object specifies the timeout value for the LSP echo requests which are sent while performing the LSP Path Discovery.	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.12`
rttMplsVpnMonTypeLpdEchoInterval This object specifies the send interval between LSP echo requests which are sent while performing the LSP Path Discovery.	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.13`
rttMplsVpnMonTypeLpdEchoNullShim This object specifies if the explicit-null label is added to LSP echo requests which are sent while performing the LSP Path Discovery. If set to TRUE all the probes…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.42.1.2.16.1.14`
rttMplsVpnMonTypeLpdStatHours The maximum number of hours of data to be kept per LPD group. The LPD group statistics will be kept in an hourly bucket. At the maximum there can be two buckets. The value of 'one…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.16`
rttMplsVpnMonTypeNumPackets This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only. …	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.2`
rttMplsVpnMonTypeDestPort This object represents the target's port number to which the packets need to be sent. This value will be configured as target port for all the operations that is go…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.3`
rttMplsVpnMonTypeSecFreqType This object specifies the reaction type for which the rttMplsVpnMonTypeSecFreqValue should be applied. The Value 'timeout' will cause secondary frequency to be set …	column	Enumeration	`.1.3.6.1.4.1.9.9.42.1.2.16.1.4`
rttMplsVpnMonTypeSecFreqValue This object represents the value that needs to be applied to secondary frequency of individual RTT operations configured by Auto SAA L3 MPLS VPN. Setting rttMplsVpn…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.5`
rttMplsVpnMonTypeLspSelector A string which specifies the address of the local host (127.X.X.X). This object will be used as lsp-selector in MPLS RTT operations configured by the Auto SAA L3 MP…	column	OctetString	`.1.3.6.1.4.1.9.9.42.1.2.16.1.6`
rttMplsVpnMonTypeLSPReplyMode This object specifies the reply mode for the LSP Echo requests originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently used by…	column	CISCO-RTTMON-TC-MIBRttMonLSPPingReplyMode	`.1.3.6.1.4.1.9.9.42.1.2.16.1.7`
rttMplsVpnMonTypeLSPTTL This object represents the TTL setting for MPLS echo request packets originated by the operations configured by the Auto SAA L3 MPLS VPN. This object is currently u…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.8`
rttMplsVpnMonTypeLSPReplyDscp This object specifies the DSCP value to be set in the IP header of the LSP echo reply packet. The value of this object will be in range of DiffServ codepoint values between 0 to 6…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.16.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects