rttMplsVpnMonReactLpdNotifyType
CISCO-RTTMON-MIB ·
.1.3.6.1.4.1.9.9.42.1.2.18.1.6
Object
column
r/w
Enumeration
This object specifies the type of LPD notifications to be
generated for the current Auto SAA L3 MPLS VPN control row.
This object will be applicable only when LSP Path Discovery is
enabled for this row.
There are two types of notifications supported for the LPD -
(a) rttMonLpdDiscoveryNotification - This notification will
be sent on the failure of LSP Path Discovery to the
particular PE. Reversal of the failure will also result in
sending the notification.
(b) rttMonLpdGrpStatusNotification - Individual probes in an LPD
group will not generate notifications independently but will
be generating dependent on the state of the group. Any
individual probe can initiate the generation of a
notification, dependent on the state of the group.
Notifications are only generated if the failure/restoration
of an individual probe causes the state of the group to
change.
The Value 'none' will not cause any notifications to be sent.
The Value 'lpdPathDiscovery' will cause (a) to be sent.
The Value 'lpdGroupStatus' will cause (b) to be sent.
The Value 'lpdAll' will cause both (a) and (b) to sent
depending on the failure conditions.
Context
- MIB
- CISCO-RTTMON-MIB
- OID
.1.3.6.1.4.1.9.9.42.1.2.18.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rttMplsVpnMonReactEntry
- Table
- rttMplsVpnMonReactTable
- Siblings
- 6
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | lpdPathDiscovery |
3 | lpdGroupStatus |
4 | lpdAll |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rttMplsVpnMonReactConnectionEnable The value set for this will be applied as
rttMonReactAdminConnectionEnable for individual probes created
by the Auto SAA L3 MPLS VPN.
When this object is set to tru… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.18.1.1 |
| rttMplsVpnMonReactTimeoutEnable The value set for this will be applied as
rttMonReactAdminTimeoutEnable for individual probes created
by the Auto SAA L3 MPLS VPN.
When this object is set to true, … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.18.1.2 |
| rttMplsVpnMonReactThresholdType The value corresponding to this object will be applied as
rttMonReactAdminThresholdType for individual probes created by
the Auto SAA L3 MPLS VPN.
The value corresp… | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.18.1.3 |
| rttMplsVpnMonReactThresholdCount This object value will be applied as
rttMonReactAdminThresholdCount for individual probes created by
the Auto SAA L3 MPLS VPN.
This object value will be applied as … | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.18.1.4 |
| rttMplsVpnMonReactActionType The value corresponding to this object will be applied as
rttMonReactAdminActionType of individual probes created by
this Auto SAA L3 MPLS VPN.
The value correspond… | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.18.1.5 |
| rttMplsVpnMonReactLpdRetryCount This object value specifies the number of attempts to be
performed before declaring the path as 'down'. Each 'single
probe' which is part of 'lspGroup' probe will be retried these… | column | attempts Integer32 | .1.3.6.1.4.1.9.9.42.1.2.18.1.7 |