rttMplsVpnMonCtrlScanInterval
CISCO-RTTMON-MIB ·
.1.3.6.1.4.1.9.9.42.1.2.15.1.7
Object
column
r/w
minutes Integer32
Specifies the frequency at which the automatic PE addition
should take place if there is any for an Auto SAA L3 MPLS VPN.
New RTT operations corresponding to the new PEs discovered will
be created and scheduled.
The default value for this object is 4 hours. The maximum value
supported is 49 days.
Context
- MIB
- CISCO-RTTMON-MIB
- OID
.1.3.6.1.4.1.9.9.42.1.2.15.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- rttMplsVpnMonCtrlEntry
- Table
- rttMplsVpnMonCtrlTable
- Siblings
- 16
Syntax
minutes Integer32
Values & Constraints
Object Constraints
range: 1-70560
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rttMplsVpnMonCtrlIndex Uniquely identifies a row in the rttMplsVpnMonCtrlTable.
This is a pseudo-random number selected by the management
station when creating a row via the
rttMplsVpnMon… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.1 |
| rttMplsVpnMonCtrlRequestSize This object represents the native payload size that needs to
be put on the packet.
This value will be configured as
rttMonEchoAdminPktDataRequestSize for all the RT… | column | octets Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.10 |
| rttMplsVpnMonCtrlVerifyData When set to true, the resulting data in each RTT operation
created by the current Auto SAA L3 MPLS VPN is compared with
the expected data. This includes checking header informatio… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.15.1.11 |
| rttMplsVpnMonCtrlStorageType The storage type of this conceptual row. When set to
'nonVolatile', this entry will be shown in 'show running'
command and can be saved into Non-volatile memory.
By… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.42.1.2.15.1.12 |
| rttMplsVpnMonCtrlProbeList This object holds the list of probes ID's that are created by
the Auto SAA L3 MPLS VPN.
The probes will be specified in the following form.
(a) Individual ID's with… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.15.1.13 |
| rttMplsVpnMonCtrlStatus The status of the conceptual Auto SAA L3 MPLS VPN control row.
In order for this object to become active
rttMplsVpnMonCtrlRttType, rttMplsVpnMonCtrlVrfName and
rt… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.42.1.2.15.1.14 |
| rttMplsVpnMonCtrlLpd When set to true, this implies that LPD (LSP Path Discovery)
is enabled for this row.
The Auto SAA L3 MPLS VPN will find all the paths to each of the
PE's and confi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.15.1.15 |
| rttMplsVpnMonCtrlLpdGrpList This object holds the list of LPD Group IDs that are created
for this Auto SAA L3 MPLS VPN row.
This object will be applicable only when LSP Path Discovery is
enabl… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.15.1.16 |
| rttMplsVpnMonCtrlLpdCompTime The completion time of the LSP Path Discovery for the entire
set of PEs which are discovered for this Auto SAA.
This object will be applicable only when LSP Path Di… | column | minutes Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.17 |
| rttMplsVpnMonCtrlRttType The type of RTT operation to be performed for Auto SAA L3
MPLS VPN.
This value must be set in the same PDU of
rttMplsVpnMonCtrlStatus.
This value mus… | column | CISCO-RTTMON-TC-MIBRttMplsVpnMonRttType | .1.3.6.1.4.1.9.9.42.1.2.15.1.2 |
| rttMplsVpnMonCtrlVrfName This field is used to specify the VPN name for which
the Auto SAA L3 MPLS VPN RTT operation will be used.
This value must be set in the same PDU of
rttMplsVpnMonCtr… | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.15.1.3 |
| rttMplsVpnMonCtrlTag A string which is used by a managing application to
identify the RTT target.
This string will be configured as rttMonCtrlAdminTag for all
the operations configured … | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.15.1.4 |
| rttMplsVpnMonCtrlThreshold This object defines an administrative threshold limit.
This value will be configured as rttMonCtrlAdminThreshold for
all the operations that will be configured by t… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.5 |
| rttMplsVpnMonCtrlTimeout Specifies the duration to wait for a RTT operation configured
automatically by the Auto SAA L3 MPLS VPN to complete.
The value of this object cannot be set to a va… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.6 |
| rttMplsVpnMonCtrlDelScanFactor Specifies the frequency at which the automatic PE deletion
should take place.
This object specifies the number of times of
rttMonMplslmCtrlScanInterval (rttMplsVpnM… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.8 |
| rttMplsVpnMonCtrlEXP This object represents the EXP value that needs to be
put as precedence bit of an IP header. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.15.1.9 |