rttMonLpdGrpStatsProbeStatus

CISCO-RTTMON-MIB · .1.3.6.1.4.1.9.9.42.1.3.7.1.19
Commands MIB view Table view

Object

column SNMPv2-TCDisplayString 
A string which holds the latest operation return code for
all the set of 'single probes' which are part of the LPD group.
The return codes will be comma separated and will follow the
same sequence of probes as followed in
'rttMonLpdGrpStatsPathIds'. The latest operation return code
will be mapped to 'up','down' or 'unkwown'.
              
'up' - Probe state is up when the rttMonLatestRttOperSense
value is 'ok'.
'down' - Probe state is down when the rttMonLatestRttOperSense
has value other then 'ok' and 'other'.
'unknown' - Probe state is unkown when the
rttMonLatestRttOperSense value is 'other'.
              
For example: If there are 5 paths in the LPD group then this
object output will look like 'ok,ok,ok,down,down'.
              
This object will be set to '0' on reset.

Context

MIB
CISCO-RTTMON-MIB
OID
.1.3.6.1.4.1.9.9.42.1.3.7.1.19
Type
column
Access
readonly
Status
current
Parent
rttMonLpdGrpStatsEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-RTTMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-MIB::rttMonLpdGrpStatsProbeStatus'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-RTTMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-RTTMON-MIB::rttMonLpdGrpStatsProbeStatus.<rttMonLpdGrpStatsGroupIndex>.<rttMonLpdGrpStatsStartTimeIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-RTTMON-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-RTTMON-MIB::rttMonLpdGrpStatsProbeStatus'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255

Conformance

Member of
ciscoStatsGroupRev7