rttMonEchoAdminAggBurstCycles
CISCO-RTTMON-MIB ·
.1.3.6.1.4.1.9.9.42.1.2.2.1.73
Object
column
SNMPv2-SMIInteger32
This object indicates the number of burst cycles to be sent during the aggregate interval. This value is currently used for Y1731 SLM(Synthetic Loss Measurment) probe. This object is applicable to Y1731 SLM probe only.
Context
- MIB
- CISCO-RTTMON-MIB
- OID
.1.3.6.1.4.1.9.9.42.1.2.2.1.73- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rttMonEchoAdminEntry
- Table
- rttMonEchoAdminTable
- Siblings
- 78
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rttMonEchoAdminProtocol Specifies the protocol to be used to perform the RTT
operation. The following list defines what protocol
should be used for each probe type:
echo, pathEcho - ipI… | column | CISCO-RTTMON-TC-MIBRttMonProtocol | .1.3.6.1.4.1.9.9.42.1.2.2.1.1 |
| rttMonEchoAdminLSREnable If this object is enabled then it means that the application
calculates response time for a specific path, defined in
rttMonEchoPathAdminEntry. This object is applicable to echo
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.10 |
| rttMonEchoAdminTargetAddressString A string which specifies the address of the target. This string
can be in IP address format or a hostname. This object
is applicable to dns probe only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.11 |
| rttMonEchoAdminNameServer A string which specifies the ip address of the name-server.
This object is applicable to dns probe only. | column | CISCO-RTTMON-TC-MIBRttMonTargetAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.12 |
| rttMonEchoAdminOperation A code that represents the specific type of RTT operation.
This object is applicable to http and ftp probe only. | column | CISCO-RTTMON-TC-MIBRttMonOperation | .1.3.6.1.4.1.9.9.42.1.2.2.1.13 |
| rttMonEchoAdminHTTPVersion A string which specifies the version number of the HTTP
Server. The syntax for the version string is
<major number>.<minor number> An example would be 1.0,
1.1 etc.,. This obj… | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.2.1.14 |
| rttMonEchoAdminURL A string which represents the URL to which a HTTP probe should
communicate with. This object is applicable to http probe only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.15 |
| rttMonEchoAdminCache If this object is false then it means that HTTP request should
not download cached pages. This means that the request should
be forwarded to the origin server. This object is app… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.16 |
| rttMonEchoAdminInterval This value represents the inter-packet delay between packets
and is in milliseconds. This value is currently used for
Jitter probe. This object is applicable to jitter probe only. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.17 |
| rttMonEchoAdminNumPackets This value represents the number of packets that need to be
transmitted. This value is currently used for Jitter probe.
This object is applicable to jitter probe only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.18 |
| rttMonEchoAdminProxy This string represents the proxy server information.
This object is applicable to http probe only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.19 |
| rttMonEchoAdminTargetAddress A string which specifies the address of the target. | column | CISCO-RTTMON-TC-MIBRttMonTargetAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.2 |
| rttMonEchoAdminString1 This string stores the content of HTTP raw request.
If the request cannot fit into String1 then it should
be split and put in Strings 1 through 5.
This string stor… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.20 |
| rttMonEchoAdminString2 This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.21 |
| rttMonEchoAdminString3 This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.22 |
| rttMonEchoAdminString4 This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.23 |
| rttMonEchoAdminString5 This string stores the content of HTTP raw request.
rttMonEchoAdminString1-5 are concatenated to
form the HTTP raw request used in the RTT operation.
This object is applicable to… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.24 |
| rttMonEchoAdminMode A code that represents the specific type of RTT operation.
This object is applicable to ftp probe only. | column | CISCO-RTTMON-TC-MIBRttMonOperation | .1.3.6.1.4.1.9.9.42.1.2.2.1.25 |
| rttMonEchoAdminVrfName This field is used to specify the VPN name in
which the RTT operation will be used. For regular RTT
operation this field should not be configured. The agent
will use this field t… | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.2.1.26 |
| rttMonEchoAdminCodecType Specifies the codec type to be used with jitter probe. This is
applicable only for the jitter probe.
If codec-type is configured the following parameters cannot be … | column | CISCO-RTTMON-TC-MIBRttMonCodecType | .1.3.6.1.4.1.9.9.42.1.2.2.1.27 |
| rttMonEchoAdminCodecInterval This field represents the inter-packet delay between
packets and is in milliseconds. This object is applicable
only to jitter probe which uses codec type. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.28 |
| rttMonEchoAdminCodecPayload This object represents the number of octets that needs to be
placed into the Data portion of the message. This value is
used only for jitter probe which uses codec type. | column | octets Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.29 |
| rttMonEchoAdminPktDataRequestSize This object represents the number of octets to be
placed into the ARR Data portion of the request
message, when using SNA protocols.
For non-ARR protocols' RTT req… | column | octets Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.3 |
| rttMonEchoAdminCodecNumPackets This value represents the number of packets that need to be
transmitted. This value is used only for jitter probe which
uses codec type. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.30 |
| rttMonEchoAdminICPIFAdvFactor The advantage factor is dependant on the type of access and
how the service is to be used.
Conventional Wire-line 0
Mobility within Building 5
Mobility within geographic ar… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.31 |
| rttMonEchoAdminLSPFECType The type of the target FEC for the RTT 'echo' and 'pathEcho'
operations based on 'mplsLspPingAppl' RttMonProtocol.
ldpIpv4Prefix - LDP IPv4 prefix. | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.2.1.32 |
| rttMonEchoAdminLSPSelector A string which specifies a valid 127/8 address. This address
is of the form 127.x.y.z.
This address is not used to route the MPLS echo packet to the
destination but is used for lo… | column | CISCO-RTTMON-TC-MIBRttMonTargetAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.33 |
| rttMonEchoAdminLSPReplyMode This object specifies the reply mode for the LSP Echo
requests. | column | CISCO-RTTMON-TC-MIBRttMonLSPPingReplyMode | .1.3.6.1.4.1.9.9.42.1.2.2.1.34 |
| rttMonEchoAdminLSPTTL This object represents the TTL setting for MPLS echo request
packets. For ping operation this represents the TTL value to
be set in the echo request packet. For trace operation it… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.35 |
| rttMonEchoAdminLSPExp This object represents the EXP value that needs to be
put as precedence bit in the MPLS echo request IP header. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.36 |
| rttMonEchoAdminPrecision This object specifies the accuracy of statistics that
needs to be calculated
milliseconds - The accuracy of stats will be of milliseconds
microseconds - The accuracy of stats will… | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.2.1.37 |
| rttMonEchoAdminProbePakPriority This object specifies the priority that will be assigned
to probe packet. This value can be set only for jitter
operation | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.2.1.38 |
| rttMonEchoAdminOWNTPSyncTolAbs This object specifies the total clock synchronization error
on source and responder that is considered acceptable for
oneway measurement when NTP is used as clock synchronization… | column | microseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.39 |
| rttMonEchoAdminPktDataResponseSize This object represents the number of octets to be
placed into the ARR Data portion of the response message.
This value is passed to the RTT Echo Server via a
field in the ARR Head… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.4 |
| rttMonEchoAdminOWNTPSyncTolPct This object specifies the total clock synchronization error
on source and responder that is considered acceptable for
oneway measurement when NTP is used as clock synchronization… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.40 |
| rttMonEchoAdminOWNTPSyncTolType This object specifies whether the value in specified for oneway
NTP sync tolerance is absolute value or percent value | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.2.1.41 |
| rttMonEchoAdminCalledNumber This string stores the called number of post dial delay.
This object is applicable to voip post dial delay probe only.
The number will be like the one actualy the user could dial.… | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.2.1.42 |
| rttMonEchoAdminDetectPoint A code that represents the detect point of post dial delay.
This object is applicable to SAA post dial delay probe only. | column | CISCO-RTTMON-TC-MIBRttMonOperation | .1.3.6.1.4.1.9.9.42.1.2.2.1.43 |
| rttMonEchoAdminGKRegistration A boolean that represents VoIP GK registration delay.
This object is applicable to SAA GK registration delay
probe only. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.44 |
| rttMonEchoAdminSourceVoicePort A string which specifies the voice-port on the source gateway.
This object is applicable to RTP probe only. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.2.2.1.45 |
| rttMonEchoAdminCallDuration Duration of RTP/Video Probe session.
This object is applicable to RTP and Video probe. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.46 |
| rttMonEchoAdminLSPReplyDscp This object specifies the DSCP value to be set in the IP header
of the LSP echo reply packet.
The value of this object will be in range of DiffServ codepoint
values between 0 to 6… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.47 |
| rttMonEchoAdminLSPNullShim This object specifies if the explicit-null label is to be added
to LSP echo requests which are sent while performing RTT
operation. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.48 |
| rttMonEchoAdminTargetMPID This object specifies the destination maintenance point ID.
It is only applicable to ethernetPing and ethernetJitter
operation. It will be set to 0 for other types of
operations. | column | CISCO-ETHER-CFM-MIBCfmMepid | .1.3.6.1.4.1.9.9.42.1.2.2.1.49 |
| rttMonEchoAdminTargetPort This object represents the target's port number. This
object is applicable to udpEcho, tcpConnect and jitter probes. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.5 |
| rttMonEchoAdminTargetDomainName This object specifies the name of the domain in which the
destination maintenance point lies. It is only applicable to
ethernetPing and ethernetJitter operation. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.42.1.2.2.1.50 |
| rttMonEchoAdminTargetVLAN This object specifies the ID of the VLAN in which the
destination maintenance point lies. It is only applicable to
ethernetPing and ethernetJitter operation.
It will be set to 0… | column | Q-BRIDGE-MIBVlanId | .1.3.6.1.4.1.9.9.42.1.2.2.1.51 |
| rttMonEchoAdminEthernetCOS This object specifies the class of service in an Ethernet
packet header. It is only applicable to ethernetPing and
ethernetJitter operation. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.52 |
| rttMonEchoAdminLSPVccvID This object specifies MPLS LSP pseudowire VCCV ID
values between 1 to 2147483647.
Note: This object cannot be set to value of 0. This default
value specifies that V… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.53 |
| rttMonEchoAdminTargetEVC This object specifies the Ethernet Virtual Connection in
which the destination maintenance point lies. It is only
applicable to ethernetPing and ethernetJitter operation.
It wil… | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.2.1.54 |
| rttMonEchoAdminTargetMEPPort This object specifies that Port Level CFM testing towards an
Outward/Down MEP will be used. It is only applicable to
ethernetPing and ethernetJitter operation.
It will be set to… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.55 |
| rttMonEchoAdminVideoTrafficProfile A string which represents the profile name to which a video
probe should use. This object is applicable to video probe
only. | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.2.1.56 |
| rttMonEchoAdminDscp This object represents the Differentiated Service Code Point
(DSCP) QoS marking in the generated synthetic packets.
Value - DiffServ Class
0 - BE (default)
1… | column | DIFFSERV-DSCP-TCDscp | .1.3.6.1.4.1.9.9.42.1.2.2.1.57 |
| rttMonEchoAdminReserveDsp This object represents the video traffic generation source.
be : best effort using DSP but without reservation
gs : guaranteed service using DSP with reservation
na… | column | Enumeration | .1.3.6.1.4.1.9.9.42.1.2.2.1.58 |
| rttMonEchoAdminInputInterface This object represents the network input interface on the
sender router where the synthetic packets are received from the
emulated endpoint source. This is used for path congruenc… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.42.1.2.2.1.59 |
| rttMonEchoAdminSourceAddress A string which specifies the IP address of the source.
This object is applicable to all probes except dns, dlsw
and sna. | column | CISCO-RTTMON-TC-MIBRttMonTargetAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.6 |
| rttMonEchoAdminEmulateSourceAddress This object specifies the IP address of the emulated source
from which the synthetic packets would be generated. If this
object is not specified, the emulated source IP address wi… | column | CISCO-RTTMON-TC-MIBRttMonTargetAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.60 |
| rttMonEchoAdminEmulateSourcePort This object represents the port number of the emulated source
from which the synthetic packets would be generated. If this
object is not specified, the emulated source port number… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.61 |
| rttMonEchoAdminEmulateTargetAddress This object specifies the IP address of the emulated target by
which the synthetic packets would be received. If this object is
not specified, the emulated target IP address will … | column | CISCO-RTTMON-TC-MIBRttMonTargetAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.62 |
| rttMonEchoAdminEmulateTargetPort This object represents the port number of the emulated target
by which the synthetic packets would be received. If this object
is not specified, the emulated target port number wi… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.63 |
| rttMonEchoAdminTargetMacAddress This object indicates the MAC address of the target device.
This object is only applicable for Y.1731 operations.
rttMonEchoAdminTargetMacAddress and rttMonEchoAdminTargetMPID
ma… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.64 |
| rttMonEchoAdminSourceMacAddress This object indicates the MAC address of the source device.
This object is only applicable for Y.1731 operations.
rttMonEchoAdminSourceMacAddress and rttMonEchoAdminSourceMPID
ma… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.42.1.2.2.1.65 |
| rttMonEchoAdminSourceMPID This object indicates the source maintenance point ID. It is
only applicable to Y.1731 operation. It will be set to zero for
other types of opearations. rttMonEchoAdminSourceMP… | column | CISCO-ETHER-CFM-MIBCfmMepid | .1.3.6.1.4.1.9.9.42.1.2.2.1.66 |
| rttMonEchoAdminEndPointListName This object specifies the name of endpoint list which a probe
uses to generate operations. | column | OctetString | .1.3.6.1.4.1.9.9.42.1.2.2.1.67 |
| rttMonEchoAdminSSM This object specifies if Source Specific Multicast is to be
added. This object is applicable to multicast probe only. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.68 |
| rttMonEchoAdminControlRetry This object specifies the maximum number of retries for control
message. | column | Unsigned32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.69 |
| rttMonEchoAdminSourcePort This object represents the source's port number. If this
object is not specified, the application will get a
port allocated by the system. This object is applicable
to all probe… | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.7 |
| rttMonEchoAdminControlTimeout This object specifies the wait duration before control message
timeout. | column | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.70 |
| rttMonEchoAdminIgmpTreeInit This object specifies number of packets to be sent for
multicast tree setup. This object is applicable to multicast
probe only. | column | Unsigned32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.71 |
| rttMonEchoAdminEnableBurst This object indicates that packets will be sent in burst. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.72 |
| rttMonEchoAdminLossRatioNumFrames This object indicates the number of frames over which to
calculate the frame loss ratio. This object is applicable
to Y1731 SLM probe only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.74 |
| rttMonEchoAdminAvailNumFrames This object indicates the number of frames over which to
calculate the availability. This object is applicable to
Y1731 SLM probe only. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.75 |
| rttMonEchoAdminTstampOptimization This object specifies whether timestamp optimization is
enabled.
When the value is 'true' then timestamp optimization is
enabled. The probe will utilize lower laye… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.76 |
| rttMonEchoAdminTargetSwitchId This object represents the destination Switch Id that
needed to send one TRILL/FB OAM Loopback request. This
object is applicable to Fabric Path Echo probe only.
Value 0 means not… | column | Unsigned32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.77 |
| rttMonEchoAdminProfileId This object represents the destination Profile Id that
needed to send one TRILL/FB OAM Loopback request. This
object is applicable to Fabric Path Echo probe only.
Value 0 means no… | column | Unsigned32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.78 |
| rttMonEchoAdminOutputInterface This object represents the network interface on the
sender router where the packets are transmitted from the
emulated endpoint source.
The user can get the Interfac… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.42.1.2.2.1.79 |
| rttMonEchoAdminControlEnable If this object is enabled, then the RTR application
will send control messages to a responder, residing on the
target router to respond to the data request packets being
sent by… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.2.2.1.8 |
| rttMonEchoAdminTOS This object represents the type of service octet in an
IP header. This object is not applicable to dhcp, dns,
ethernetPing and ethernetJitter. | column | Integer32 | .1.3.6.1.4.1.9.9.42.1.2.2.1.9 |