rttMonCtrlAdminStatus

CISCO-RTTMON-MIB · .1.3.6.1.4.1.9.9.42.1.2.1.1.9

Object

column r/w SNMPv2-TCRowStatus

The status of the conceptual RTT control row.
              
In order for this object to become active, the following 
row objects must be defined:  
 - rttMonCtrlAdminRttType
Additionally:
 - for echo, pathEcho based on 'ipIcmpEcho' and dlsw probes
    rttMonEchoAdminProtocol and 
    rttMonEchoAdminTargetAddress;
 - for echo, pathEcho based on 'mplsLspPingAppl'
    rttMonEchoAdminProtocol, rttMonEchoAdminTargetAddress 
    and rttMonEchoAdminLSPFECType
 - for udpEcho, tcpConnect and jitter probes
    rttMonEchoAdminTargetAddress and
    rttMonEchoAdminTargetPort
 - for http and ftp probe
    rttMonEchoAdminURL 
 - for dns probe
    rttMonEchoAdminTargetAddressString 
    rttMonEchoAdminNameServer 
 - dhcp probe doesn't require any additional objects
              
All other objects can assume default values. The 
conceptual Rtt control row will be placed into a 
'pending' state (via the rttMonCtrlOperState object)
if rttMonScheduleAdminRttStartTime is not specified.
              
Most conceptual Rtt control row objects cannot be 
modified once this conceptual Rtt control row has been 
created.  The objects that can change are the following:
              
 - Objects in the rttMonReactAdminTable can be modified
   as needed without setting this object to 
   'notInService'.
 - Objects in the rttMonScheduleAdminTable can be 
   modified only when this object has the value of
   'notInService'.
 - The rttMonCtrlOperState can be modified to control
   the state of the probe.
              
Once this object is in 'active' status, it cannot be 
set to 'notInService' while the rttMonCtrlOperState
is in 'active' state.  Thus the rttMonCtrlOperState 
object must be transitioned first. 
              
This object can be set to 'destroy' from any value
at any time.

Context

MIB: CISCO-RTTMON-MIB
OID: .1.3.6.1.4.1.9.9.42.1.2.1.1.9
Type: column
Access: readwrite
Status: current
Parent: rttMonCtrlAdminEntry
Table: rttMonCtrlAdminTable
Siblings: 11

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rttMonCtrlAdminIndex Uniquely identifies a row in the rttMonCtrlAdminTable. This is a pseudo-random number, selected by the management station or auto-generated based on operation started by the ma…	column	Integer32	`.1.3.6.1.4.1.9.9.42.1.2.1.1.1`
rttMonCtrlAdminNvgen When set to true, this entry will be shown in 'show running' command and can be saved into Non-volatile memory.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.42.1.2.1.1.10`
rttMonCtrlAdminGroupName If the operation is created through auto measure group creation, then this string will specify the group name to which this operation is associated.	column	OctetString	`.1.3.6.1.4.1.9.9.42.1.2.1.1.11`
rttMonCtrlAdminLongTag This object provides additional information about the Probe and is inserted into trap notifications, but has no other significance to the agent. Setting this object…	column	OctetString	`.1.3.6.1.4.1.9.9.42.1.2.1.1.12`
rttMonCtrlAdminOwner Identifies the entity that created this table row.	column	OctetString	`.1.3.6.1.4.1.9.9.42.1.2.1.1.2`
rttMonCtrlAdminTag deprecated A string which is used by a managing application to identify the RTT target. This string is inserted into trap notifications, but has no other significance to the agent. …	column	OctetString	`.1.3.6.1.4.1.9.9.42.1.2.1.1.3`
rttMonCtrlAdminRttType The type of RTT operation to be performed. This value must be set in the same PDU or before setting any type specific configuration. Note: The RTT operation 'lspGr…	column	CISCO-RTTMON-TC-MIBRttMonRttType	`.1.3.6.1.4.1.9.9.42.1.2.1.1.4`
rttMonCtrlAdminThreshold This object defines an administrative threshold limit. If the RTT operation time exceeds this limit and if the conditions specified in rttMonReactAdminThresholdType or rttMonHis…	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.1.1.5`
rttMonCtrlAdminFrequency Specifies the duration between initiating each RTT operation. This object cannot be set to a value which would be a shorter duration than rttMonCtrlAdminTimeout. …	column	seconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.1.1.6`
rttMonCtrlAdminTimeout Specifies the duration to wait for a RTT operation completion. The value of this object cannot be set to a value which would specify a duration exceeding rttMonCtrlAdminFrequen…	column	milliseconds Integer32	`.1.3.6.1.4.1.9.9.42.1.2.1.1.7`
rttMonCtrlAdminVerifyData When set to true, the resulting data in each RTT operation is compared with the expected data. This includes checking header information (if possible) and exact packet size. Any…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.42.1.2.1.1.8`