rttMonApplLatestSetError
CISCO-RTTMON-MIB ·
.1.3.6.1.4.1.9.9.42.1.1.12
Object
scalar
SNMPv2-TCDisplayString
An error description for the last error message caused
by set.
Currently, it includes set error caused due to setting
rttMonApplFreeMemLowWaterMark greater than the available
free memory on the router or not enough memory left to
create new probes.
Context
- MIB
- CISCO-RTTMON-MIB
- OID
.1.3.6.1.4.1.9.9.42.1.1.12- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rttMonAppl
- Siblings
- 14
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rttMonApplVersion Round Trip Time monitoring application version
string.
The format will be:
'Version.Release.Patch-Level: Textual-Description'
For example: '1.0.0… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.42.1.1.1 |
| rttMonApplProbeCapacity This object defines the number of new probes that can be
configured on a router. The number depends on the value
of rttMonApplFreeMemLowWaterMark, free bytes
available on the rou… | scalar | Integer32 | .1.3.6.1.4.1.9.9.42.1.1.10 |
| rttMonApplFreeMemLowWaterMark This object defines the amount of free memory a router must
have in order to configure RTR. If RTR found out that the
memory is falling below this mark, it will not allow new
prob… | scalar | Integer32 | .1.3.6.1.4.1.9.9.42.1.1.11 |
| rttMonApplResponder Enable or disable RTR responder on the router. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.42.1.1.13 |
| rttMonApplAuthTable A table which contains the definitions for key-strings
that will be used in authenticating RTR Control Protocol. | table | - | .1.3.6.1.4.1.9.9.42.1.1.14 |
| rttMonApplLpdGrpStatsReset This object is used to reset certain objects within the
rttMonLpdGrpStatsTable. When the object is set to value of
an active LPD Group identifier the associated objects will be
r… | scalar | Integer32 | .1.3.6.1.4.1.9.9.42.1.1.15 |
| rttMonApplMaxPacketDataSize The maximum size of the data portion an echo
packet supported by this RTT application. This is
the maximum value that can be specified by
(rttMonEchoAdminPktDataRequestSize + ARR… | scalar | octets Integer32 | .1.3.6.1.4.1.9.9.42.1.1.2 |
| rttMonApplTimeOfLastSet The last time at which a set operation occurred
on any of the objects in this MIB. The managing
application can inspect this value in order to
determine whether changes have be… | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.42.1.1.3 |
| rttMonApplNumCtrlAdminEntry This object defines the maximum number of entries
that can be added to the rttMonCtrlAdminTable. It
is calculated at the system init time. The value
is impacted when rttMonApplFre… | scalar | Integer32 | .1.3.6.1.4.1.9.9.42.1.1.4 |
| rttMonApplReset When set to 'reset' the entire RTT application
goes through a reset sequence, making a best
effort to revert to its startup condition. Any
and all rows in the Overall Control G… | scalar | CISCO-RTTMON-TC-MIBRttReset | .1.3.6.1.4.1.9.9.42.1.1.5 |
| rttMonApplPreConfigedReset obsolete When set to 'reset' the RTT application will
reset the Application Preconfigured MIB section.
This will force the RTT application to delete all
entries in the rttMonApp… | scalar | CISCO-RTTMON-TC-MIBRttReset | .1.3.6.1.4.1.9.9.42.1.1.6 |
| rttMonApplSupportedRttTypesTable A table of which contains the supported Rtt
Monitor Types.
See the RttMonRttType textual convention for
the definition of each type. | table | - | .1.3.6.1.4.1.9.9.42.1.1.7 |
| rttMonApplSupportedProtocolsTable A table of which contains the supported Rtt
Monitor Protocols.
See the RttMonProtocol textual convention
for the definition of each protocol. | table | - | .1.3.6.1.4.1.9.9.42.1.1.8 |
| rttMonApplPreConfigedTable obsolete A table of which contains the previously
configured Script Names and File IO targets.
These Script Names and File IO targets are installed
via a different mechanism tha… | table | - | .1.3.6.1.4.1.9.9.42.1.1.9 |