rmonTimeFilterMode

This object controls the way the SNMP agent implements the
getnext operation for tables with a TimeFilter index, such
as those found in the RMON2-MIB module.
          
If this object has the value `stopAfterOne(1)', then a GetNext
or GetBulk operation will provide one pass through a given 
table, i.e., the agent will continue to the next object or 
table, instead of incrementing a TimeMark INDEX value, even if
there exists higher TimeMark values which are valid for
the same conceptual row.
          
This mode is not strictly compliant with the TimeFilter textual
convention definition, because potentially many conceptual rows
will be skipped instead of returned in a GetNext or GetBulk
operation.  Such rows are identical to each other, except for
the returned TimeMark INDEX value. This mode is intended only
for testing purposes, however it may also be useful if an NMS
wishes to utilize the GetBulk PDU. This mode will prevent the
GetBulk responses from containing duplicate rows due to the
TimeFilter mechanism.
          
If this object has the value `stopAfterAll(2)', then a getNext
or getBulk MIB walk will repeat through the same MIB table 
until the TimeMark for the most-recently changed entry is 
reached. Note that as long as traffic occurs on the monitored 
interface, it is possible a highest value of the TimeFilter 
INDEX may never be reached. This mode is strictly compliant 
with the TimeFilter textual convention definition.  Note that 
GetBulk PDU responses in this mode will likely contain multiple
copies of the same MIB instances, differing only in the 
TimeMark INDEX value.
          
As an example, consider row 'fooEntry' which was last updated
at 'time 1000'. An NMS may use any TimeMark INDEX value in the
range '0' to '1000', and the current (i.e., time of get 
request) counter values for the 'fooEntry' will be returned by
agent. In the 'stopAfterOne' mode, the agent will not increment
the fooEntry TimeMark index under any conditions. In the
'stopAfterAll' mode, the agent will increment any fooEntry
TimeMark INDEX value in the range '0' to '999', up until
the TimeMark value of '1000' is reached.

MIB

CISCO-RMON-CONFIG-MIB

OID

.1.3.6.1.4.1.9.9.103.1.1.1

Type

scalar

Access

readwrite

Status

current

Parent

ciscoRmon2ConfigObjects