CISCO-RMON-CONFIG-MIB Table View

This table extends the port copy capability found in the
SMON MIB portCopyTable. This table is intended to augment 
every portCopyEntry, but not all features provided may be 
available on all RMON platforms. In such a case, a 
particular MIB object will be implemented with read-only 
access.

portCopyXEntry row .1.3.6.1.4.1.9.9.103.1.2.1.1

Describes a particular port copy extension entry.

When creating an entry in this table using the 'createAndwait'
method, the following rules are applied:

- no SPAN consistency check is done for…

Indexes

No indexes recorded

Column	Syntax	OID
portCopyLoVlanMask This object affects the way VLAN-based traffic is copied from a switch source port, for the indicated port copy operation. It is used in tandem with the portCopyHiVlanMask to identify all possible 4096 IEEE 802.1Q VLA…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.103.1.2.1.1.1
portCopyHiVlanMask This object affects the way VLAN-based traffic is copied from a switch source port, for the indicated port copy operation. It is used in tandem with the portCopyLoVlanMask to identify all possible 4096 IEEE 802.1Q VLA…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.103.1.2.1.1.2
portCopyDestLoVlanMask This object affects the way VLAN-based traffic to a switch destination port is filtered for the indicated port copy operation. It is used in tandem with the portCopyDestHiVlanMask to identify all possible 4096 IEEE 8…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.103.1.2.1.1.3
portCopyDestHiVlanMask This object affects the way VLAN-based traffic to a switch destination port is filtered for the indicated port copy operation. It is used in tandem with the portCopyDestLoVlanMask to identify all possible 4096 IEEE 8…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.103.1.2.1.1.4
portCopyOption Indicates the additional SPAN configuration on destination port. Instances of same portCopyDest index must have same values in portCopyOption. Changes on portCopyOption of one instance will be applied to all other ins…	Bitsr/w Enumerated Values: 0 inpkts 1 learningDisable 2 dot1q 3 isl 4 multicast 5 unicastDisable 6 broadcastDisable 7 goodDisable 8 badDisable	.1.3.6.1.4.1.9.9.103.1.2.1.1.5
portCopySessionNo Indicates the arbitrary unique identifier for this SPAN session. If a non zero value is specified, the agent will check if a SPAN session that has the same session number exists. If so, the agent will u…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.103.1.2.1.1.6
portCopySessionType Indicates the SPAN session type. 'remoteSource' refers to session where traffic is copied from source port to RSPAN VLAN as its destination port. 'remoteDestination' refers to session wher…	Enumerationr/w Enumerated Values: 1 notSpecified 2 local 3 remoteSource 4 remoteDestination 5 localTx	.1.3.6.1.4.1.9.9.103.1.2.1.1.7
portCopyRemoveSrc Indicates how the agent will modify a SPAN session when an entry belonging to this session is deleted. The value 'true' specifies source port based entry deletion. In source port based deletion, all ent…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.103.1.2.1.1.8
portCopyReflectorPort Indicates the reflector port of this SPAN session. The value of this object is ignored whenever the value of portCopySessionType is not remoteSource(3).	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.103.1.2.1.1.9
portCopyInpktVlan This object indicates the default VLAN that is used for the untagged incoming traffic from the portCopyDest when portCopyOption's inpkts bit is set. The range is defined to identify all possible 4096 IEEE 802.1Q VLAN I…	Unsigned32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.9.9.103.1.2.1.1.10

Contains SPAN session entries. A row is created for each
SPAN session configured in a device.

crcSpanSessionEntry row .1.3.6.1.4.1.9.9.103.1.2.4.1

Describes a particular SPAN session.

Indexes

crcSpanSessionNo

Column	Syntax	OID
crcSpanSessionNo Defines a SPAN session number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.103.1.2.4.1.1
crcSpanSessionType Defines the SPAN session type. 'local' refers to SPAN session where both source and destination ports reside in the same switch. This type of SPAN is manageable via portCopyTable and portCopyXTable. …	Enumeration Enumerated Values: 1 local 2 remote 3 erspan 4 service 5 other	.1.3.6.1.4.1.9.9.103.1.2.4.1.2
crcSpanSessionEnabled Indicates whether the SPAN session is enabled. Modifying the value of crcSpanSessionEnabled to 'false' stops the SPAN monitoring but does not remove this SPAN configuration from the system.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.103.1.2.4.1.3
crcSpanSessionDescr Provides description of this SPAN session.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.103.1.2.4.1.4

Contains ERSPAN session entries. A row is created for each
SPAN session configured in a device. A row can  only be
created if an instance of the same session number is not
present in crcSpanSessionEntry. 
          
ERSPAN, or  Encapsulated Remote SPAN, provides the ability to
copy all frames from a specified source to a specified
destination across a layer 3 network, allowing source and
destination to be from different devices.
          
Depending on type of ERSPAN, the source can be an interface
from crcERSpanIFIndex of crcERSpanIFTable, the destination
be a layer 3 internet address defined by crcERSpanIp of this
table, or vise versa.

crcERSpanSessionEntry row .1.3.6.1.4.1.9.9.103.1.2.5.1

Describes a particular SPAN session.

Indexes

crcERSpanSessionNo

Column	Syntax	OID
crcERSpanSessionNo Defines an ERSPAN session number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.103.1.2.5.1.1
crcERSpanSessionType Defines the ERSPAN session type. This object may not be modified if the value of the corresponding instance of crcERSpanSessionRowStatus is active. 'eRSpanSource' refers to a session where traffic is copi…	Enumerationr/w Enumerated Values: 1 eRSpanSource 2 eRSpanDestination	.1.3.6.1.4.1.9.9.103.1.2.5.1.2
crcERSpanSessionDescr Provides description of this ERSPAN session. This object may be modified when the row is active.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.103.1.2.5.1.3
crcERSpanEncapID Defines ERSPAN's encapsulation id for this entry. This object may be modified when the row is active.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.103.1.2.5.1.4
crcERSpanIpType Defines the type of Internet address for crcERSpanIp used by this entry. This object may be modified when the row is active.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.103.1.2.5.1.5
crcERSpanIp Defines Internet address of copy source or destination. If crcERSanSessionType has value of eRSpanSource(1), crcERSpanIp is a copy destination. If crcERSpanSessionType has value of eRSpanDestination(2), crcERSpanIp is a…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.103.1.2.5.1.6
crcSrcERSpanIpTTL The IP TTL value for this traffic type. This object is only significant when object crcERSpanSessionType is eRSpanSource(1). This object may be modified when the row is active.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.9.9.103.1.2.5.1.7
crcSrcERSpanDscpOrPrec The QOS classification used - precedence or DSCP based. This object is only significant when object crcERSpanSessionType is eRSpanSource(1). This object may be modified when the row is acti…	Enumerationr/w Enumerated Values: 1 dscp 2 precedence	.1.3.6.1.4.1.9.9.103.1.2.5.1.8
crcSrcERSpanIpPrec The IP precedence value for this traffic type. This object is only significant when object crcERSpanSessionType is eRSpanSource(1) and object crcSrcERSpanDscpOrPrec is precedence(1). This o…	Unsigned32r/w Constraints: range: 0-7	.1.3.6.1.4.1.9.9.103.1.2.5.1.9
crcSrcERSpanIpDscp The IP DSCP value for this traffic type. This object is only significant when object crcERSpanSessionType is eRSpanSource(1) and object crcSrcERSpanDscpOrPrec is dscp(1). This object may be…	CISCO-QOS-PIB-MIBDscpr/w Type Constraints: range: 0..63	.1.3.6.1.4.1.9.9.103.1.2.5.1.10
crcERSpanIpVRF Specifies VRF used for the traffic type. This object may be modified when the row is active.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.103.1.2.5.1.11
crcSrcERSpanLoVlanMask This object affects the way VLAN-based traffic is copied from a switch source port, for the indicated port copy operation. It is used in tandem with the crcSrcERSpanHiVlanMask to identify all possible 4096 IEEE 802.1Q V…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.103.1.2.5.1.12
crcSrcERSpanHiVlanMask This object affects the way VLAN-based traffic is copied from a switch source port, for the indicated port copy operation. It is used in tandem with the crcSrcERSpanLoVlanMask to identify all possible 4096 IEEE 802.1Q V…	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.9.9.103.1.2.5.1.13
crcSrcERSpanOrigIpType Defines the type of Internet address for crcSrcERSpanOrigIp used by this entry. This object is only significant when object crcERSpanSessionType is eRSpanSource(1). This object may be modif…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.103.1.2.5.1.14
crcSrcERSpanOrigIp Defines the Internet address of copy source. This object is only significant when object crcERSpanSessionType is eRSpanSource(1). This object may be modified when the row is active.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.103.1.2.5.1.15
crcDstERSpanOptiondeprecated Indicates the additional ERSPAN configuration on destination port. - inpkts(0) This bit is set to enable the destination port to receive incoming traffic. - learningDisable(1) This bi…	Bitsr/w Enumerated Values: 0 inpkts 1 learningDisable	.1.3.6.1.4.1.9.9.103.1.2.5.1.16
crcERSpanSessionRowStatus Defines the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.103.1.2.5.1.17

This table in conjunction with crcERSpanSessionTable,
provides the ability to copy all frames from a specified 
source to a specified destination across a layer 3
network.
          
A row is created for each interface from ifEntries that
is configured as ERSPAN source or destination while 
crcERSpanSessionRowStatus is active(1) for the corresponding
session.

crcERSpanIFEntry row .1.3.6.1.4.1.9.9.103.1.2.6.1

Describes a particular ERSPAN copy source or copy
destination entry.

Indexes

crcERSpanSessionNo crcERSpanIFIndex

Column	Syntax	OID
crcERSpanIFIndex Defines the device interface's ifIndex. Mapped via crcERSpanSessionNo, if crcERSanSessionType from crcERSpanSessionTable has value of eRSpanSource(1), crcRSpanIFIndex is a copy source. If crcERSpanSessionType has valu…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.103.1.2.6.1.1
crcERSpanIFDirection This object affects the way traffic is copied from a device's source. If this object has the value 'copyRxOnly(1)', then only traffic received on crcERSpanIFIndex will be copied to the destination. …	Enumerationr/w Enumerated Values: 1 copyRxOnly 2 copyTxOnly 3 copyBoth	.1.3.6.1.4.1.9.9.103.1.2.6.1.2
crcERSpanIFRowStatus Defines the status of this entry. For this object to be active(1), the crcERSpanSessionRowStatus from crcERSpanSessionTable, mapped via crcERSpanSessionNo, must be active(1). If the said crcERSpanSession…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.103.1.2.6.1.3
crcERSpanIFOption Indicates the additional ERSPAN configuration on destination port. - inpkts This bit is set to enable the destination port to receive incoming traffic. - learningDisable This bit is s…	Bitsr/w Enumerated Values: 0 inpkts 1 learningDisable	.1.3.6.1.4.1.9.9.103.1.2.6.1.4

Contains a list of ports that are configured as allowed
SPAN destination ports.
          
Entry of portCopyTable with its portCopyDest can not be
created if crcSpanDstPermitListEnabled is 'true' and a 
corresponding entry does not exist in the
crcSpanDstPermitListTable table. In other words the
InterfaceIndex specified by portCopyDest object from
SMON-MIB must match ifIndex of entries in this table.

crcSpanDstPermitListEntry row .1.3.6.1.4.1.9.9.103.1.2.8.1

Describes a particular entry that can be set as SPAN
destination.

Indexes

IF-MIBifIndex

Column	Syntax	OID
crcSpanDstPermitListRowStatus Defines the status of this entry. An active entry means that the port of this ifIndex can be set as SPAN destination port. The valid values are active(1), createAndGo(4) and destroy(6).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.103.1.2.8.1.1

This table controls the configuration of RMON collection
based on statistical sampling techniques, for each 
monitored interface on the RMON probe. It is a SPARSE-AUGMENTS
of the ifEntry found in the IF-MIB module.
          
An entry is created in this table at the same time the 
augmented ifEntry is created (usually at system startup time), 
for each interface which can be monitored by the RMON agent.
An associated entry in the SMON MIB dataSourceCapsTable is 
also created for each RMON-capable interface at the same time.
          
An RMON collection is associated with a particular
interface if the control table dataSource OBJECT
IDENTIFIER is of the form 'ifIndex.I', and 'I'
is the same value as the ifIndex value for the 
ifEntry and rmonSampleConfigEntry.

rmonSampleConfigEntry row .1.3.6.1.4.1.9.9.103.1.3.1.1

Describes a particular sampling configuration for the
indicated RMON-capable interface.

Indexes

IF-MIBifIndex

Column	Syntax	OID
rmonSamplingEnabled This object affects the way the RMON probe uses statistical sampling to collect packets from the indicated interface. If this object has the value 'false', then the probe will attempt to monitor all packe…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.103.1.3.1.1.1

A table containing operational SPAN egress packet replication mode
for each SPAN session. A row is created for each SPAN session that 
is capable of monitoring egress traffic in a device.

crcSpanSessionEgressModeEntry row .1.3.6.1.4.1.9.9.103.1.5.2.1

Describes a particular SPAN session that is capable of monitoring
egress traffic.

Indexes

crcSpanSessionNo

Column	Syntax	OID
crcSpanEgressReplicationOperMode The current egress replication mode in operation.	SpanTxReplicationMode Type Values: 1 centralized 2 distributed	.1.3.6.1.4.1.9.9.103.1.5.2.1.1

This table lists the resource capacity for each SPAN session
type that is capable of providing such information.

crcSpanCapacityEntry row .1.3.6.1.4.1.9.9.103.1.6.1.1

Indicating resource capacity and usage information for
a particular SPAN capacity session type.

Indexes

crcSpanCapacityType

Column	Syntax	OID
crcSpanCapacityType Indicating the SPAN resource capacity session type. 'allSrc' refers to all SPAN source sessions. 'allDst' refers to all SPAN destination sessions. 'localSrc' refers to local…	Enumeration Enumerated Values: 1 allSrc 2 allDst 3 localSrc 4 localTx 5 rspanSrc 6 rspanDst 7 erspanSrc 8 erspanDst 9 serviceModule 10 oamLoopback 11 capture 12 reflector	.1.3.6.1.4.1.9.9.103.1.6.1.1.1
crcSpanCapacityShared Indicating the shared SPAN capacity type. 'none' means the capacity is not shared out of crcSpanSharedSource or crcSpanSharedDestination. 'source' means the capacity is counted against crcS…	Enumeration Enumerated Values: 1 none 2 source 3 destination	.1.3.6.1.4.1.9.9.103.1.6.1.1.2
crcSpanMaxSession The maximum number of sessions allowed for the SPAN type defined by crcSpanCapacityType. A value of zero indicates no specific limit for this SPAN capacity session type.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.103.1.6.1.1.3
crcSpanUsedSession The number of sessions currently used for the SPAN capacity session type defined.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.103.1.6.1.1.4