coifccCcKind

CISCO-OPTICAL-IF-CROSS-CONNECT-MIB · .1.3.6.1.4.1.9.10.68.1.2.3.1.5

Object

column r/w Enumeration

The type of call control used to establish a cross-connect.
              
If no value of this object is provided when a row is activated
through SNMP, then the value 'provisioned' is assigned by the
agent.
              
For point-to-point cross-connects, the only sets allowed on
this object are during initial row creation, and to change the
value of this object from 'protection' to 'provisioned', which
automatically changes the coifccCcKind value of the
'provisioned' cross-connect with the same coifccCcIndex value
to 'protection'.  A change from 'protection' to 'provisioned'
is allowed when coifccCcRowStatus is 'active'.
              
The use is as follows:
    provisioned(1)
        Provisioned by the user or by a management system
        using the Command Line Interface, SNMP, or other
        means of management access to the network element.
    automatic(2)
        Created automatically by the network element, without
        user, management, or control plane intervention.  In
        particular, this is used to represent fixed interface
        cross-connects due to the presence of entities such as
        optical add/drop multiplexers.
    dynamic(3)
        Created by request from a control plane (e.g. from
        GMPLS signalling).
    protection(4)
        Created to include the second of a pair of protected
        interfaces in a cross-connect, when a cross-connect
        entry for the first interface in the pair is being
        created.  Such an entry cannot be deleted directly.
        It is deleted when the cross-connect entry containing
        the other interface(s) of the protected pair(s) is
        deleted.

Context

MIB: CISCO-OPTICAL-IF-CROSS-CONNECT-MIB
OID: .1.3.6.1.4.1.9.10.68.1.2.3.1.5
Type: column
Access: readwrite
Status: current
Parent: coifccCrossConnectEntry
Table: coifccCrossConnectTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	provisioned
`2`	automatic
`3`	dynamic
`4`	protection
`5`	other

Related Objects

Sibling Objects

Object	Type	Syntax	OID
coifccCcIndex A unique value used to identify this cross-connect. For each interface associated with this cross-connect, the agent reports this cross-connect index value in the coifccIfCrossCo…	column	Integer32	`.1.3.6.1.4.1.9.10.68.1.2.3.1.1`
coifccCcH2LLastChange The value of MIB II's sysUpTime at the time this cross-connect entered its current operational state in the high to low direction. If the current state was entered prior to the l…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.10.68.1.2.3.1.10`
coifccCcRowStatus The status of this entry in the coifccCrossConnectTable. This object is used to create a cross-connect or to modify or delete an existing cross-connect. Write acce…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.10.68.1.2.3.1.11`
coifccCcL2HAttenuation The value of this object indicates optical signal attenuation due to connectors, optical wavelength filters, optical switches, and other optical components, in the direction from …	column	1/10ths of dB Integer32	`.1.3.6.1.4.1.9.10.68.1.2.3.1.12`
coifccCcH2LAttenuation The value of this object indicates optical signal attenuation due to connectors, optical wavelength filters, optical switches, and other optical components, in the direction from …	column	1/10ths of dB Integer32	`.1.3.6.1.4.1.9.10.68.1.2.3.1.13`
coifccCcLowIfIndex The value of this object is equal to MIB II's ifIndex value of the interface for this cross-connect. The term low implies that this interface has the numerically lower ifIndex va…	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.10.68.1.2.3.1.2`
coifccCcHighIfIndex The value of this object is equal to MIB II's ifIndex value of the interface for this cross-connect. The term high implies that this interface has the numerically higher ifIndex …	column	IF-MIBInterfaceIndex	`.1.3.6.1.4.1.9.10.68.1.2.3.1.3`
coifccCcSwitchType This object specifies the type of switching element used to implement this cross-connect. The value 'opticalCrossConnect' applies only when there is no optical-to-e…	column	Enumeration	`.1.3.6.1.4.1.9.10.68.1.2.3.1.4`
coifccCcCreationTime The value of MIB II's sysUpTime object at the time this bi-directional cross-connect was created. If the current state was entered prior to the last re-initialization of the agen…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.10.68.1.2.3.1.6`
coifccCcL2HOperStatus The operational status of the cross-connect in the direction from the interface that has the numerically lower ifIndex value, to the interface that has the numerically higher ifIn…	column	CoifccCrossConnectOperStatus	`.1.3.6.1.4.1.9.10.68.1.2.3.1.7`
coifccCcH2LOperStatus The operational status of the cross-connect in the direction from the interface that has the numerically higher ifIndex value, to the interface that has the numerically lower ifIn…	column	CoifccCrossConnectOperStatus	`.1.3.6.1.4.1.9.10.68.1.2.3.1.8`
coifccCcL2HLastChange The value of MIB II's sysUpTime at the time this cross-connect entered its current operational state in the low to high direction. If the current state was entered prior to the l…	column	SNMPv2-TCTimeStamp	`.1.3.6.1.4.1.9.10.68.1.2.3.1.9`