cnnEouRateLimit
CISCO-NAC-NAD-MIB ·
.1.3.6.1.4.1.9.9.484.1.1.8
Object
The number of clients that can be simultaneously
validated.
Set the rate limit to 0 (zero), rate limiting will be
turned off.
If the rate limit is set to 100 and there are 101 clients,
validation will not occur until one drop off.
Context
- MIB
- CISCO-NAC-NAD-MIB
- OID
.1.3.6.1.4.1.9.9.484.1.1.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cnnEouGlobalObjects
- Siblings
- 14
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnnEouVersion The version of EOU in use on the local system.
Value zero indicates the version can not be determined. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.1 |
| cnnEouTimeoutHoldPeriod Length of time that can elapse before the client sessions
are purged from the system due to client inactivity. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.10 |
| cnnEouTimeoutRetransmit The timeout period for the EOU message retransmitted. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.11 |
| cnnEouTimeoutRevalidation The timeout period for the revalidation. Setting this object
to 0 will globally disable periodic revalidation on this
device. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.12 |
| cnnEouTimeoutStatusQuery The timeout period for the status query after revalidation. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.13 |
| cnnEouCriticalRecoveryDelay This object specifies the EOU critical recovery delay time for
the device. A value of zero indicates that critical recovery
delay feature is disabled. | scalar | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.14 |
| cnnEouRevalidationEnabled Indicates whether the EOU revalidation is globally enabled
or disabled in the device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.1.15 |
| cnnEouEnabled Indicates whether the posture validation via EOU is globally
enabled or disabled in the device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.1.2 |
| cnnEouAllowClientless Indicates whether to allow authentication of clientless
hosts (system that does not run Cisco Trust Agent). | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.1.3 |
| cnnEouAllowIpStationId It indicates whether to send the host IP address in the
calling station ID field of RADIUS request. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.1.4 |
| cnnEouLoggingEnabled To enable or disable EOU system logging events.
Set to 'true' to enable syslog message at an informational level
(syslog level 6). | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.1.5 |
| cnnEouMaxRetry The number of maximum retry attempts for EOU. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.484.1.1.6 |
| cnnEouPort The UDP port for EOU. The port cannot conflict with
other UDP application. | scalar | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.4.1.9.9.484.1.1.7 |
| cnnEouTimeoutAAA Timeout period used by NAD with AAA (Authentication,
Authorization and Accounting. | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.1.9 |