CISCO-NAC-NAD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
7
Rows
7
Columns
59
.1.3.6.1.4.1.9.9.484.1.2.1 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouAuthIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouAuthIpTable'
A list of statically authorized IP devices in the system.
cnnEouAuthIpEntry row .1.3.6.1.4.1.9.9.484.1.2.1.1
An entry containing the associated policy information of
the statically authorized IP device. An entry can be created,
or deleted by using cnnEouAuthIpRowStatus.

Each statically authorized IP device is ass…
Column Syntax OID
The type of Internet address by which the statically
authorized IP device is reachable.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.484.1.2.1.1.1
The Internet address for the statically authorized IP device.
The type of this address is determined by the value of the
cnnEouAuthIpAddrType object.
OctetString
Constraints:
range: 1-64
.1.3.6.1.4.1.9.9.484.1.2.1.1.2
Using 'inverse mask' to support IP wildcards. The mask used
with the source IP address will specify what traffic is exempted
from EAP validation.

e.g. cnnEouAuthIpAddr: 10.0.0.0
cnnEouAuthIpAddrMask…
INET-ADDRESS-MIBInetAddressPrefixLengthr/w
Type Constraints:
range: 0..2040
.1.3.6.1.4.1.9.9.484.1.2.1.1.3
The policy associate with the statically authorized IP
device. The policy needs to be present in the policy-database
before an statically authorized IP device can be associated
to it.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.2.1.1.4
The storage type for this conceptual row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.484.1.2.1.1.5
The status of this conceptual row.

To create an entry, users set the value of this object to
'createAndGo'.

The transition from 'active' to 'notInService' may not be
supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.484.1.2.1.1.6
.1.3.6.1.4.1.9.9.484.1.2.2 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouAuthMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouAuthMacTable'
A list of static authorized devices identified by MAC address.
cnnEouAuthMacEntry row .1.3.6.1.4.1.9.9.484.1.2.2.1
An entry containing the associated policy information of
the statically authorized device identified by MAC address.
The entry is created, and deleted by using
cnnEouAuthMacRowStatus.
Column Syntax OID
The MAC address of the static authorized device.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.9.9.484.1.2.2.1.1
Using 'inverse mask' support MAC wildcards. The mask used
with the source MAC address will specify what traffic is
exempted from EAP validation.
e.g. cnnEouAuthMacAddr: 00:0d:bc:ef:eb:bd
cnnEouAuthMacAddrMask: 00:…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.9.9.484.1.2.2.1.2
The policy associate with the statically authorized device
identified by MAC address. The policy needs to be present
in the policy-database before an device can be associated to
it.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.2.2.1.3
The storage type for this conceptual row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.484.1.2.2.1.4
The status of this conceptual row.

To create an entry, users set the value of this object to
'createAndGo'.

The transition from 'active' to 'notInService' may not be
supported.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.484.1.2.2.1.5
.1.3.6.1.4.1.9.9.484.1.2.3 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouAuthDeviceTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouAuthDeviceTypeTable'
A list of static authorized devices indexed by device type.
cnnEouAuthDeviceTypeEntry row .1.3.6.1.4.1.9.9.484.1.2.3.1
An entry containing the information of the static authorized
device indexed by device type.
Column Syntax OID
The static authorize device type.
CISCO-NAC-TC-MIBCnnEouDeviceType
Type Values:
1ciscoIpPhone
.1.3.6.1.4.1.9.9.484.1.2.3.1.1
The storage type for this conceptual row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.484.1.2.3.1.2
This object is used to create or delete an entry in the
cnnEouAuthDeviceTypeTable.

A row may be created using the 'CreateAndGo' option.

A row may be deleted by setting the RowStatus to 'des…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.484.1.2.3.1.3
.1.3.6.1.4.1.9.9.484.1.3.1 · 1 row entry · 12 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouIfConfigTable'
A list of EOU configurations for the EOU capable interfaces.
cnnEouIfConfigEntry row .1.3.6.1.4.1.9.9.484.1.3.1.1
An entry containing the EOU configuration information for a
particular EOU capable interface.
Indexes
Column Syntax OID
Setting this object to 'auto' means the Posture Validation via
EOU ability at this interface would be enabled if a end point
device is found.

If the value of this object is 'disabled' then the interface
w…
Enumerationr/w
Enumerated Values:
1auto
2disabled
3bypass
.1.3.6.1.4.1.9.9.484.1.3.1.1.1
The maximum number of retry by EOU for this interface.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.9.484.1.3.1.1.2
An EOU validate action to the devices associated with the
interface.

This object always has the value 'none' when read.

none(1) no operation is performed.

initiali…
Enumerationr/w
Enumerated Values:
1none
2initialize
3revalidate
4noRevalidate
.1.3.6.1.4.1.9.9.484.1.3.1.1.3
This object indicates whether the timeout configurations on
this interface are based on the corresponding global
timeout configurations or not.

aaa(0) If this bit is set, the value of
Bitsr/w
Enumerated Values:
0aaa
1holdPeriod
2retransmit
3revalidation
4statusQuery
5maxRetry
6clientless
7ipStationId
.1.3.6.1.4.1.9.9.484.1.3.1.1.4
The timeout period used by EOU for the AAA server
connection on this interface.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.3.1.1.5
The hold period of this interface. The hold period
is the length of the time that can elapse before the client
session entries are purged from the system due to client
inactivity.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.3.1.1.6
The timeout period for the EOU message retransmitted at this
interface.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.3.1.1.7
The timeout period for the revalidation at this interface.
Setting this object to 0 will disable periodic revalidation on
this device.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.3.1.1.8
The timeout period for the status query after revalidation at
this interface.
secondsSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.3.1.1.9
Specified the name of the policy template to be applied when
cnnEouHostResultState is 'aaaFail'. The specified policy name
must exist in cpgPolicyTable if it is not empty string.
CISCO-POLICY-GROUP-MIBCpgPolicyNameOrEmptyr/w
Type Constraints:
range: 0..128
.1.3.6.1.4.1.9.9.484.1.3.1.1.10
This object specifies whether to allow authentication of
clientless hosts (system that does not run Cisco Trust Agent)
on the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.484.1.3.1.1.11
This object specifies whether to send the host IP address
in the calling station ID field of RADIUS request for hosts
on the interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.484.1.3.1.1.12
.1.3.6.1.4.1.9.9.484.1.4.7 · 1 row entry · 14 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouHostQueryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouHostQueryTable'
A control table used to query the client host by
specifying retrieval criteria for the EOU information.
Each row instance in the table represents a query with
its parameters.  The resulting data for each instance of
a query in this table is returned in the
cnnHostQueryResultTable.
          
The maximum number of entries (rows) in this table cannot
exceed the value of cnnEouHostMaxQueries object.
cnnEouHostQueryEntry row .1.3.6.1.4.1.9.9.484.1.4.7.1
A conceptual row of the cnnEouHostQueryTable used to setup
retrieval criteria to search for the EOU hosts on the system.
The actual search is started by setting the value of
cnnEouHostQueryStatus to 'active'. Once a row…
Column Syntax OID
An arbitrary integer in the range of 1 to cnnEouHostMaxQueries
to identify this control query.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.7.1.1
Setting each value causes the appropriate action:

authenClientless(1) - causes the creation of row(s) in the
cnnHostQueryResultTable corresponding to the current
EOU information for th…
Enumerationr/w
Enumerated Values:
1authenClientless
2authenEap
3authenStatic
4interface
5ip
6mac
7postureToken
8all
9postureTokenString
.1.3.6.1.4.1.9.9.484.1.4.7.1.2
An index value that uniquely identifies an interface
where the end point device is connected.
The interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.9.9.484.1.4.7.1.3
The internet address type for the queried host.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.484.1.4.7.1.4
The Internet address for the queried host. The type of this
address is determined by the value of the
cnnEouHostQueryIpAddrType.

If the 'ip' option of cnnEouHostQueryMask is selected, an
appropriate IP a…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.7.1.5
The Mac address for the queried host.

If the 'mac' option of cnnEouHostQueryMask is selected, an
appropriate MAC address is assigned to this object
then only the host with the specified MAC address will b…
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.9.9.484.1.4.7.1.6
The assigned posture token for the queried host.

If the 'postureToken' option of cnnEouHostQueryMask is selected,
an appropriate posture token is assigned to this object then
only the host with the specif…
CISCO-NAC-TC-MIBCnnEouPostureTokenr/w
Type Values:
1unknown
2healthy
3checkup
4quarantine
5infected
.1.3.6.1.4.1.9.9.484.1.4.7.1.7
The number of searched detected hosts to be skipped before
storing any host in cnnEouHostResultTable.

This object can be used along with cnnEouHostQueryTotalHosts
object to skip previously found hosts by …
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.7.1.8
This is the maximum number of rows in the
cnnEouHostResultTable, resulting from this query.

A value of zero (0) indicates no limit rows in
cnnEouHostResultTable, resulting from this query.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.7.1.9
Indicating the total number of the hosts matching the query
criterion.

-1 - Either the query has not been started or the agent is
still processing this query instance. It is the default
value w…
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.9.9.484.1.4.7.1.10
Indicating the status of the query by following values:

-1 - Either the query has not been started or the agent is
still processing this query instance. It is the default
value when the row is …
Integer32
Constraints:
range: -1-2147483647
.1.3.6.1.4.1.9.9.484.1.4.7.1.11
Time when this query was last set to active.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
.1.3.6.1.4.1.9.9.484.1.4.7.1.12
The status object used to manage rows in this table.
When set to 'createAndGo', the query is initiated.

The completion of the query is indicated by the value of
cnnEouHostQueryRows as soon as it becomes g…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.484.1.4.7.1.13
The assigned posture token string for the queried host. If the
'postureTokenString' option of cnnEouHostQueryMask is selected,
an appropriate posture token string is assigned to this object
then only the host with the …
CISCO-NAC-TC-MIBCnnEouPostureTokenStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.7.1.14
.1.3.6.1.4.1.9.9.484.1.4.8 · 1 row entry · 18 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouHostResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouHostResultTable'
A table containing current detected host information
corresponding to all the completed queries set up in
the cnnEouHostQueryTable, that were detected in the device.
The query result will not become available until the current
search completes.
cnnEouHostResultEntry row .1.3.6.1.4.1.9.9.484.1.4.8.1
A conceptual row of cnnEouHostResultTable, containing
posture validation information of an detected host that
matches the search criteria set in the corresponding row of
cnnEouHostQueryTable.
Column Syntax OID
A number which uniquely identifies a result entry
matching a particular query.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.8.1.1
An index value that uniquely identifies an interface
where the end point device is currently connected.
The interface identified by a particular value of
this index is the same interface as identified
by the same value …
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.9.9.484.1.4.8.1.2
The type of Internet address by which the detected host
is reachable.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.484.1.4.8.1.3
The internet address for the detected host. The type
of this address is determined by the value of the
cnnEouHostResultIpAddrType object.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.4
Indicates The MAC address of the detected host.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.9.9.484.1.4.8.1.5
This object indicates the authentication type used in
the posture validation process for this detected host.
CISCO-NAC-TC-MIBCnnEouAuthType
Type Values:
1clientless
2eap
3static
4unknown
.1.3.6.1.4.1.9.9.484.1.4.8.1.6
Indicates the posture token of the detected host.
During the posture validation process, the host will be
placed into a particular category and have a token assigned to
it. This assignment will depend on the state of t…
CISCO-NAC-TC-MIBCnnEouPostureToken
Type Values:
1unknown
2healthy
3checkup
4quarantine
5infected
.1.3.6.1.4.1.9.9.484.1.4.8.1.7
Indicates the length of time, in minutes, that host
has been connected.
minutesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.8.1.8
This object specifies the URL(Web page) where the latest
Anti-Virus file can be downloaded or upgraded, if the
detected host fails the credential validation then it
may require remediation.
CISCO-TCCiscoURLString
Type Constraints:
range: 1..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.9
The mapped ACL to this detected host. A character string for
an ACL (Access Control List) name. Valid characters are a-z,
A-Z, 0-9, ,'#', '-', '_' and '.'. Some devices may require
that an ACL name contains at least…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.10
The timeout period, in seconds, for the status query after
revalidation at this interface.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.8.1.11
The timeout period, in second, for the revalidation at this
interface.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.484.1.4.8.1.12
Indicates the current EOU state of this detected host.
CISCO-NAC-TC-MIBCnnEouState
Type Values:
1initialize
2hello
3clientless
4eapRequest
5response
6authenticated
7fail
8abort
9aaaFail
10hold
11client
12server
.1.3.6.1.4.1.9.9.484.1.4.8.1.13
Indicates the posture token string of the detected host.
During the posture validation process, the host will be
placed into a particular category and have a token assigned to
it. This assignment will depend on the sta…
CISCO-NAC-TC-MIBCnnEouPostureTokenString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.14
Indicates the name of the access control list(ACL) for URL
redirection. Any ingress HTTP from the host that matches this
ACL will be subjected to redirection to the URL (Web page)
specified in cnnEouHostResultUrlRedir.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.15
Indicates the tag which is received as a policy response from
the ACS server for the detected host.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.16
This object uniquely identifies a host session. Session ID is
included in access requests to AAA server and in Web requests
to Audit server.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.17
This object indicates the name of policy template to be
applied when EouHostResultState is 'aaaFail'.
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.484.1.4.8.1.18
.1.3.6.1.4.1.9.9.484.1.5.4 · 1 row entry · 1 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnnEouIfIpDevTrackConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-NAC-NAD-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-NAC-NAD-MIB::cnnEouIfIpDevTrackConfigTable'
A table of IP Device Tracking configuration for EOU
interfaces in the system.
cnnEouIfIpDevTrackConfigEntry row .1.3.6.1.4.1.9.9.484.1.5.4.1
A set of EOU IP Device Tracking configuration information on
an EOU interface.
Indexes
Column Syntax OID
Specifies if IP Device Tracking feature is enabled on this
interface.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.484.1.5.4.1.1