cnnEouIfTimeoutGlobalConfig
CISCO-NAC-NAD-MIB ·
.1.3.6.1.4.1.9.9.484.1.3.1.1.4
Object
column
r/w
Bits
This object indicates whether the timeout configurations on
this interface are based on the corresponding global
timeout configurations or not.
aaa(0) If this bit is set, the value of
cnnEouIfTimeoutAAA is based on the
value of cnnEouTimeoutAAA.
holdPeriod(1) If this bit is set, the value of
cnnEouIfTimeoutHoldPeriod is based on the
value of cnnEouTimeoutHoldPeriod.
retransmit(2) If this bit is set, the value of
cnnEouIfTimeoutRetransmit is based on the
value of cnnEouTimeoutRetransmit.
revalidation(3) If this bit is set, the value of
cnnEouIfTimeoutRevalidation is based on the
value of cnnEouTimeoutRevalidation.
statusQuery(4) If this bit is set, the value of
cnnEouIfTimeoutStatusQuery is based on the
value of cnnEouTimeoutStatusQuery.
maxRetry(5) If this bit is set, the value of
cnnEouIfMaxRetry is based on the
value of cnnEouMaxRetry.
clientless(6) If this bit is set, the value of
cnnEouIfAllowClientless is based on the
value of cnnEouAllowClientless.
ipStationId(7) If this bit is set, the value of
cnnEouIfAllowIpStationId is based on the
value of cnnEouAllowIpStationId.
If a bit is not set, the value of the corresponding object
in the same conceptual row is not based on its corresponding
global object.
If users configure object which is covered by
cnnEouIfTimeoutGlobalConfig in the same conceptual row
while the corresponding bit is set, the corresponding bit will
be unset in order to reflect that such configuration is not
from its corresponding global object.
Context
- MIB
- CISCO-NAC-NAD-MIB
- OID
.1.3.6.1.4.1.9.9.484.1.3.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnnEouIfConfigEntry
- Table
- cnnEouIfConfigTable
- Siblings
- 11
Syntax
Bits
Values & Constraints
Enumerated Values
0 | aaa |
1 | holdPeriod |
2 | retransmit |
3 | revalidation |
4 | statusQuery |
5 | maxRetry |
6 | clientless |
7 | ipStationId |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnnEouIfAdminStatus Setting this object to 'auto' means the Posture Validation via
EOU ability at this interface would be enabled if a end point
device is found.
If the value of this o… | column | Enumeration | .1.3.6.1.4.1.9.9.484.1.3.1.1.1 |
| cnnEouIfAaaFailPolicy Specified the name of the policy template to be applied when
cnnEouHostResultState is 'aaaFail'. The specified policy name
must exist in cpgPolicyTable if it is not empty string. | column | CISCO-POLICY-GROUP-MIBCpgPolicyNameOrEmpty | .1.3.6.1.4.1.9.9.484.1.3.1.1.10 |
| cnnEouIfAllowClientless This object specifies whether to allow authentication of
clientless hosts (system that does not run Cisco Trust Agent)
on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.3.1.1.11 |
| cnnEouIfAllowIpStationId This object specifies whether to send the host IP address
in the calling station ID field of RADIUS request for hosts
on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.3.1.1.12 |
| cnnEouIfMaxRetry The maximum number of retry by EOU for this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.2 |
| cnnEouIfValidateAction An EOU validate action to the devices associated with the
interface.
This object always has the value 'none' when read.
none(1) no operati… | column | Enumeration | .1.3.6.1.4.1.9.9.484.1.3.1.1.3 |
| cnnEouIfTimeoutAAA The timeout period used by EOU for the AAA server
connection on this interface. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.5 |
| cnnEouIfTimeoutHoldPeriod The hold period of this interface. The hold period
is the length of the time that can elapse before the client
session entries are purged from the system due to client
inactivity. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.6 |
| cnnEouIfTimeoutRetransmit The timeout period for the EOU message retransmitted at this
interface. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.7 |
| cnnEouIfTimeoutRevalidation The timeout period for the revalidation at this interface.
Setting this object to 0 will disable periodic revalidation on
this device. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.8 |
| cnnEouIfTimeoutStatusQuery The timeout period for the status query after revalidation at
this interface. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.9 |