cnnEouIfAdminStatus
CISCO-NAC-NAD-MIB ·
.1.3.6.1.4.1.9.9.484.1.3.1.1.1
Object
column
r/w
Enumeration
Setting this object to 'auto' means the Posture Validation via
EOU ability at this interface would be enabled if a end point
device is found.
If the value of this object is 'disabled' then the interface
will act as it would if it had no posture validation via EOU
ability.
Setting this object to 'bypass' allows the host connected
to this interface this interface to bypass the Posture
Validation and directly download the host network access policy
from AAA server.
Context
- MIB
- CISCO-NAC-NAD-MIB
- OID
.1.3.6.1.4.1.9.9.484.1.3.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cnnEouIfConfigEntry
- Table
- cnnEouIfConfigTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | auto |
2 | disabled |
3 | bypass |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cnnEouIfAaaFailPolicy Specified the name of the policy template to be applied when
cnnEouHostResultState is 'aaaFail'. The specified policy name
must exist in cpgPolicyTable if it is not empty string. | column | CISCO-POLICY-GROUP-MIBCpgPolicyNameOrEmpty | .1.3.6.1.4.1.9.9.484.1.3.1.1.10 |
| cnnEouIfAllowClientless This object specifies whether to allow authentication of
clientless hosts (system that does not run Cisco Trust Agent)
on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.3.1.1.11 |
| cnnEouIfAllowIpStationId This object specifies whether to send the host IP address
in the calling station ID field of RADIUS request for hosts
on the interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.484.1.3.1.1.12 |
| cnnEouIfMaxRetry The maximum number of retry by EOU for this interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.2 |
| cnnEouIfValidateAction An EOU validate action to the devices associated with the
interface.
This object always has the value 'none' when read.
none(1) no operati… | column | Enumeration | .1.3.6.1.4.1.9.9.484.1.3.1.1.3 |
| cnnEouIfTimeoutGlobalConfig This object indicates whether the timeout configurations on
this interface are based on the corresponding global
timeout configurations or not.
aaa(0) If … | column | Bits | .1.3.6.1.4.1.9.9.484.1.3.1.1.4 |
| cnnEouIfTimeoutAAA The timeout period used by EOU for the AAA server
connection on this interface. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.5 |
| cnnEouIfTimeoutHoldPeriod The hold period of this interface. The hold period
is the length of the time that can elapse before the client
session entries are purged from the system due to client
inactivity. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.6 |
| cnnEouIfTimeoutRetransmit The timeout period for the EOU message retransmitted at this
interface. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.7 |
| cnnEouIfTimeoutRevalidation The timeout period for the revalidation at this interface.
Setting this object to 0 will disable periodic revalidation on
this device. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.8 |
| cnnEouIfTimeoutStatusQuery The timeout period for the status query after revalidation at
this interface. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.484.1.3.1.1.9 |