cnnEouHostValidateAction

CISCO-NAC-NAD-MIB · .1.3.6.1.4.1.9.9.484.1.4.1

Object

scalar r/w Enumeration

An EOU validate action to the devices.
          
Initialize: When a device is initialized, all previous state
information about that host is deleted and the admission
control process for that host will start with no state.
          
Revalidate: When a host is revalidated, state information about
that host is retained so that the host still has its' normal
access during the revalidation process.
          
This object always has the value 'none' when read.
          
none(1) - no operation is performed.
          
initializeAll(2) - to manually initiates reauthentication of
          all endpoint devices on the system.
          
initializeAuthClientless(3) - to manually initiates
          reauthentication of all clientless endpoint devices.
          
initializeAuthEap(4) - to manually initiates reauthentication of
          all the endpoint devices authorized by Extensive
          Authentication Protocol.
          
initializeAuthStatic(5) - to manually initiates reauthentication
          of all the statically authorized endpoint devices.
          
initializeIp(6) - to manually initiates reauthentication of a
          specific IP device.  The value in
          cnnEouHostValidateIpAddrType and
          cnnEouHostValidateIpAddr are used by this operation.
          
initializeMac(7) - to manually initiates reauthentication of the
          endpoint device identified by MAC address.  The value
          in cnnEouHostValidateMacAddr is used by this
          operation.
          
initializePostureToken(8) - to manually initiates
          reauthentication of the endpoint device(s) with a
          specify posture token assigned.  The value in
          cnnEouHostValidatePostureToken is used by this
          operation.  
          
          This enumerated integer is deprecated and replaced by
          initializePostureTokenStr.
          
revalidateAll(9) - to revalidate EOU posture credentials of all
          devices on the system.
          
revalidateAuthClientless(10) - to revalidate EOU posture
          credentials of all clientless devices on the system.
          
revalidateAuthEap(11) - to revalidate EOU posture credentials of
          the devices authorized by EAP on the system.
          
revalidateAuthStatic(12) - to revalidate EOU posture credentials
          of all statically authorized devices on the system.
          
revalidateIp(13) - to revalidates EOU posture credentials of a
          specific IP device.  The value in
          cnnEouHostValidateIpAddrType and
          cnnEouHostValidateIpAddr are used by this operation.
          
revalidateMac(14) - to revalidates EOU posture credentials of a
          specific device identified by MAC address.  The value
          in cnnEouHostValidateMacAddr is used by this
          operation.
          
revalidatePostureToken(15) - to enable revalidates EOU posture
          credentials of the devices with the specific posture
          token assigned.  The value in 
          cnnEouHostValidatePostureToken is used by this
          operation.
          
          This enumerated integer is deprecated and replaced by
          revalidatePostureTokenStr.
          
noRevalidateAll(16) -  to disable revalidation of all devices on
          the system.
          
noRevalidateAuthClientless(17) - to disable the revalidation of
          all clientless devices on the system.
          
noRevalidateAuthEap(18) - to disable the revalidation of all
          devices authorized by EAP on the system.
          
noRevalidateAuthStatic(19) - to disable the revalidation of all
          statically authorized devices on the system.
          
noRevalidateIp(20) - to disable the revalidation of the specific
          IP device.  The value in cnnEouHostValidateIpAddrType
          and cnnEouHostValidateIpAddr are used by this operation.
          
noRevalidateMac(21) - to disable the revalidation of the specific
          device identified by MAC address.  The value in
          cnnEouHostValidateMacAddr is used by this operation.
          
noRevalidatePostureToken(22) - to disable the revalidation of all
          device with the specific posture token assigned.
          The value in cnnEouHostValidatePostureToken is used by
          this operation.
          
          This enumerated integer is deprecated and replaced by 
          noRevalidatePostureTokenStr.
          
initializePostureTokenStr(23) - to manually initiates
          reauthentication of the endpoint device(s) with a
          specify posture token assigned.  The value in
          cnnEouHostValidatePostureTokenStr is used by this
          operation.
          
revalidatePostureTokenStr(24) - to enable revalidates EOU
          posture credentials of the devices with the specific
          posture token assigned.  The value in
          cnnEouHostValidatePostureTokenStr is used by this
          operation.
          
noRevalidatePostureTokenStr(25) - to disable the revalidation
          of all device with the specific posture token
          assigned.  The value in
          cnnEouHostValidatePostureTokenStr is used by this
    operation.

Context

MIB: CISCO-NAC-NAD-MIB
OID: .1.3.6.1.4.1.9.9.484.1.4.1
Type: scalar
Access: readwrite
Status: current
Parent: cnnEouHostMIBObjects
Siblings: 8

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	none
`2`	initializeAll
`3`	initializeAuthClientless
`4`	initializeAuthEap
`5`	initializeAuthStatic
`6`	initializeIp
`7`	initializeMac
`8`	initializePostureToken
`9`	revalidateAll
`10`	revalidateAuthClientless
`11`	revalidateAuthEap
`12`	revalidateAuthStatic
`13`	revalidateIp
`14`	revalidateMac
`15`	revalidatePostureToken
`16`	noRevalidateAll
`17`	noRevalidateAuthClientless
`18`	noRevalidateAuthEap
`19`	noRevalidateAuthStatic
`20`	noRevalidateIp
`21`	noRevalidateMac
`22`	noRevalidatePostureToken
`23`	initializePostureTokenStr
`24`	revalidatePostureTokenStr
`25`	noRevalidatePostureTokenStr

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cnnEouHostValidateIpAddrType The type of Internet address for a detected host.	scalar	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.9.484.1.4.2`
cnnEouHostValidateIpAddr The Internet address for a detected host. The type of this address is determined by the value of the cnnEouHostValidateIpAddrType.	scalar	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.9.484.1.4.3`
cnnEouHostValidateMacAddr The Mac address for a detected host.	scalar	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.9.9.484.1.4.4`
cnnEouHostValidatePostureToken deprecated Type of posture token for a detected host. This object is deprecated and replaced by cnnEouHostValidatePostureTokenStr.	scalar	CISCO-NAC-TC-MIBCnnEouPostureToken	`.1.3.6.1.4.1.9.9.484.1.4.5`
cnnEouHostMaxQueries Maximum number of query entries allowed to be outstanding at any time, in the cnnEouHostQueryTable.	scalar	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.484.1.4.6`
cnnEouHostQueryTable A control table used to query the client host by specifying retrieval criteria for the EOU information. Each row instance in the table represents a query with its parameters. The…	table	-	`.1.3.6.1.4.1.9.9.484.1.4.7`
cnnEouHostResultTable A table containing current detected host information corresponding to all the completed queries set up in the cnnEouHostQueryTable, that were detected in the device. The query res…	table	-	`.1.3.6.1.4.1.9.9.484.1.4.8`
cnnEouHostValidatePostureTokenStr Posture token string for a detected host.	scalar	CISCO-NAC-TC-MIBCnnEouPostureTokenString	`.1.3.6.1.4.1.9.9.484.1.4.9`