cLRlanPolicyIpv4Acl
CISCO-LWAPP-RLAN-MIB ·
.1.3.6.1.4.1.9.9.856.1.1.2.1.5
Object
column
r/w
OctetString
This object uniquely identifies the name of ipv4 ACL for given RLAN.
Context
- MIB
- CISCO-LWAPP-RLAN-MIB
- OID
.1.3.6.1.4.1.9.9.856.1.1.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLRlanPolicyEntry
- Table
- cLRlanPolicyTable
- Siblings
- 44
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLRlanPolicyProfileName This object uniquely identifies one instance of
a RLAN policy on the controller. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.1 |
| cLRlanPoeEnabled This object uniquely identifies
RLAN Power Over Ethernet status.
A value of 'true' indicates
that RLAN POE is enabled.
A value of 'false' indicates
that RLAN POE is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.10 |
| cLRlanHostMode This object configures the host mode
for the RLAN.
0 - SINGLE_HOST_MODE,
1 - MULTI_HOST_MODE,
2 - MULTI_DOMAIN_MODE. | column | Enumeration | .1.3.6.1.4.1.9.9.856.1.1.2.1.11 |
| cLRlanViolationMode This objecti configures the voilation
mode for the RLAN.
0 - REPLACE,
1 - SHUTDOWN,
2 - PROTECT | column | Enumeration | .1.3.6.1.4.1.9.9.856.1.1.2.1.12 |
| cLRlanVoiceVlanId This object specifies VLAN ID for the voice
during the multi domain mode for RLAN on the controller.
The host mode (cLRlanHostMode) should be set to
multi-domain mode(value: 3). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.856.1.1.2.1.13 |
| cLRlanDataVlanId This object specifies VLAN ID for the data
during the multi domain mode for RLAN on the controller.
The host mode (cLRlanHostMode) should be set to
multi-domain mode(value: 3). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.856.1.1.2.1.14 |
| cLRlanBlacklistEnabled This object identifies is the blacklisting
is enabled or not for the given RLAN.
A value of 'true' indicates
that RLAN Blacklisting is enabled.
A value of 'false' indicates
that… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.15 |
| cLRlanBlacklistTimeout This object identifies the timeout
duration in seconds for the blacklist in RLAN. | column | Unsigned32 | .1.3.6.1.4.1.9.9.856.1.1.2.1.16 |
| cLRlanAAAPolicyName This object identifies the AAA policy name
for the given RLAN. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.17 |
| cLRlanSessionTimeout This object identifies the session
timeout duration in seconds for RLAN. | column | Unsigned32 | .1.3.6.1.4.1.9.9.856.1.1.2.1.18 |
| cLRlanPreAuthEnabled This object specifies if the preAuth is
enabled or not for the RLAN on the controller.
A value of 'true' indicates that
RLAN Pre-Authentication is enabled.
A value of 'false' in… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.19 |
| cLRlanPolicyRowStatus This is the status column for this row and used
to create, modify and delete specific instances of rows
in this table.
This table supports modification of writable objects when th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.856.1.1.2.1.2 |
| cLRlanDhcpServerType This object specifies the address type
DHCP parameters IP for Remote-LAN. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.856.1.1.2.1.20 |
| cLRlanDhcpServer This object configures the
DHCP parameters for Remote-LAN | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.856.1.1.2.1.21 |
| cLRlanRadiusHttpProfiling deprecated This object uniquely identifies Client profiling
on RLAN in Radius mode based on HTTP attribute.
A value of 'true' indicates that
Radius HTTP profiling is enabled.
A value of 'f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.22 |
| cLRlanRadiusDhcpProfiling deprecated This object uniquely identifies Client profiling
on RLAN in Radius mode based on DHCP attribute.
A value of 'true' indicates that
Radius DHCP profiling is enabled.
A value of 'f… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.23 |
| cLRlanLocalHttpProfiling deprecated This object uniquely identifies Client profiling
on RLAN in local mode based on HTTP attribute.
A value of 'true' indicates that
Local HTTP profiling is enabled.
A value of 'fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.24 |
| cLRlanLocalDhcpProfiling deprecated This object uniquely identifies Client profiling
on RLAN in local mode based on DHCP attribute.
A value of 'true' indicates that
Local DHCP profiling is enabled.
A value of 'fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.25 |
| cLRlanIpv6IngressStatus This object specifies if the flow monitor
on ingress traffic, for IPv6, is enabled or disabled.
A value of 'true' indicates that
IPv6 Ingress traffic is enabled.
A value of 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.26 |
| cLRlanIpv6EgressStatus This object specifies if the flow monitor
on egress traffic, for IPv6, is enabled or disabled.
A value of 'true' indicates that
IPv6 Engress traffic is enabled.
A value of 'false… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.27 |
| cLRlanIpv4IngressStatus This object specifies if the flow monitor
on ingress traffic, for IPv4, is enabled or disabled.
A value of 'true' indicates that
IPv4 Ingress traffic is enabled.
A value of 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.28 |
| cLRlanIpv4EgressStatus This object specifies if the flow monitor
on egress traffic, for IPv4, is enabled or disabled.
A value of 'true' indicates that
IPv4 Engress traffic is enabled.
A value of 'false… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.29 |
| cLRlanPolicyStatus This object specifies whether the RLAN policy
is enabled or not.
A value of 'true' indicates that
RLAN policy profile is enabled.
A value of 'false' indicates that
RLAN policy … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.3 |
| cLRlanIpv6IngressName This object specifies the Qos profile name for
flow monitor on ingress traffic, for IPv6. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.30 |
| cLRlanIpv6EgressName This object specifies the Qos profile name for
flow monitor on egress traffic, for IPv6. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.31 |
| cLRlanIpv4IngressName This object specifies the Qos profile name for
flow monitor on ingress traffic, for IPv4. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.32 |
| cLRlanIpv4EgressName This object specifies the Qos profile name for
flow monitor on egress traffic, for IPv4. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.33 |
| cLRlanSplitTunnelGatewayType This object identifies the IP address type
of gateway address for the split tunnel
trafficking of the data on RLAN. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.856.1.1.2.1.34 |
| cLRlanSplitTunnelGateway This object identifies the gateway address
for the split tunnel trafficking of the data on RLAN. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.856.1.1.2.1.35 |
| cLRlanSplitTunnelNetmaskType This object identifies the netmask for the
split tunnel trafficking of the data on RLAN. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.856.1.1.2.1.36 |
| cLRlanSplitTunnelNetmask This object identifies the netmask for the
split tunnel trafficking of the data on RLAN. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.856.1.1.2.1.37 |
| cLRlanSplitTunnel This object identifies whether the split tunnel
traffic movement of the data is enabled.
A value of 'true' indicates that
split tunnelling is enabled.
A value of 'false' indicat… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.38 |
| cLRlanAclName This object identifies the ACL name
for the split tunnel data trafficking. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.39 |
| cLRlanPolicyDesc This object describes the policy of RLAN. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.4 |
| cLRlanSplitTunnelOverride This object identifies whether the split tunnel
traffic movement of the data is overriden.
A value of 'true' indicates that
split tunnel override is enabled.
A value of 'false' … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.40 |
| cLRlanAccountingList This object specifies the AAA Accounting list
associated to the given RLAN | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.41 |
| cLRlanDhcpEnabled This object specifies whether the DHCP is
required for the IPv4 of the given RLAN.
A value of 'true' indicates
that RLAN DHCP is enabled.
A value of 'false' indicates that
RLAN… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.42 |
| cLRlanCentralDhcp This object specifies if the central dhcp
for RLAN is enabled or disabled.
A value of 'true' indicates that
Central DHCP is enabled.
A value of 'false' indicates that
Central DH… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.43 |
| cLRlanMdnsPolicy This object specifies the mDNS service policy
configured under RLAN | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.44 |
| cLRlanPowerLevelId This object specifies the power level for
port | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.856.1.1.2.1.45 |
| cLRlanPolicyIpv6Acl This object uniquely identifies the
name of ipv6 ACL for given RLAN. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.6 |
| cLRlanAAAOverride This object specifies if the AAA override for
global parameters is enabled or disabled.
A value of 'true' indicates that
AAA Override is enabled.
A value of 'false' indicates tha… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.7 |
| cLRlanCentralSwitching This object specifies if the central switching
for RLAN is enabled or disabled.
A value of 'true' indicates that
Central Switching is enabled.
A value of 'false' indicates that
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.856.1.1.2.1.8 |
| cLRlanInterface This object uniquely identifies the
RLAN interface name. | column | OctetString | .1.3.6.1.4.1.9.9.856.1.1.2.1.9 |