CISCO-LWAPP-RLAN-MIB Table View

This table represents the RLAN configuration sent by
the controller to the APs for their operation.
          
LWAPP APs exchange configuration messages with the
controller and get the required configuration for
their 802.11 related operations.  As part of these
messages, the RLAN configuration is pushed by the
controller to the LWAPP APs.  
          
This table doesn't have any dependencies on other
existing tables.  By defining cLRlanIndex, the
unique identifier for a RLAN, this table provides
a common index structure for use in several other
new tables that populate information on security
related attributes like authentication, encryption,
802.11 parameters, Quality-of-Service attributes
etc., that would relate to a particular RLAN.
          
Rows are added or deleted by explicit 
management actions initiated by the user from a
network management station through the 
cLRlanRowStatus object.

cLRlanEntry row .1.3.6.1.4.1.9.9.856.1.1.1.1

Each entry in this table represents the RLAN
configuration sent by the controller to APs
for use during their operations. entries can be
added/deleted by explicit management actions by Prime
or by user console.

Indexes

cLRlanIndex

Column	Syntax	OID
cLRlanIndex This object uniquely identifies one instance of a RLAN on the controller.	Unsigned32 Constraints: range: 1-128	.1.3.6.1.4.1.9.9.856.1.1.1.1.1
cLRlanRowStatus This is the status column for this row and used to create, modify and delete specific instances of rows in this table. This table supports modification of writable objects when the RowStatus is 'active'. The following o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.856.1.1.1.1.2
cLRlanProfileName This object represents the profile name assigned to this RLAN. The name assigned to a RLAN has to be unique across all the RLANs on the controller. An administrator can assign a meaningful name that could later be used…	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.3
cLRlanMacFiltering A type of security policy for Mobile Stations (Clients). This enables filtering of clients by MAC address.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.4
cLRlanAuthList This object is used to configure AAA Authentication list for RLAN	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.5
cLRlanSecurity8021X This object specifies if the dot1x authentication is enabled or not for the RLAN. A value of 'true' indicates that dot1x security is enabled. A value of 'false' indicates that dot1x security is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.1.1.6
cLRlanSecurityWebAuth This object specifies if the web authentication is enabled or not for the RLAN. A value of 'true' indicates that web authentication is enabled. A value of 'false' indicates that web authentication is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.1.1.7
cLRlanEapAuthProfileName This object uniquely identifies the profile name using which EAP authentication is done for this RLAN	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.8
cLRlanEapAuthStatus This object specifies if the EAP authentication is enabled or not for the RLAN. A value of 'true' indicates that EAP authentication is enabled. A value of 'false' indicates that EAP authentication is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.1.1.9
cLRlanWebAuthParameter This object specifies the Parameter for web authentication for the given RLAN	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.10
cLRlanClientLimit This object indicates the maximum number of allowed clients for the given RLAN. Default value 0 indicates no restriction on the client number.	Unsigned32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.9.9.856.1.1.1.1.11
cLRlanStatus This object represents the status of the RLAN. A value of 'true' indicates that RLAN profile is enabled. A value of 'false' indicates that RLAN profile is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.1.1.12
cLRlanWebAuthIpv4Acl This object represents the pre web Auth IPv4 ACL for the given RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.13
cLRlanWebAuthIpv6Acl This object represents the pre web Auth IPv4 ACL for the given RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.14
cLRlanSecurity8021XAuthList This object represents the dot1x authentication list for the given RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.1.1.15
cLRlanMdnsMode This object represents the mdns mode of the Remote Lan 0 indicates RLAN is in Bridge mode for mDNS packets 1 indicates RLAN is is Drop mode for mDNS packets 2 indicates RLAN is in Gateway mode for mDNS packets	Enumerationr/w Enumerated Values: 0 bridge 1 drop 2 gateway	.1.3.6.1.4.1.9.9.856.1.1.1.1.16

This table holds the RLAN policies
configured on the controller. 
Each entry is represented by the object 
cLRlanPolicyEntry.

cLRlanPolicyEntry row .1.3.6.1.4.1.9.9.856.1.1.2.1

Each entry in this table represents the RLAN policy
configuration sent by the controller to APs
for use during their operations. entries can be
added/deleted by explicit management actions by
NMS or by user console

Indexes

cLRlanPolicyProfileName

Column	Syntax	OID
cLRlanPolicyProfileName This object uniquely identifies one instance of a RLAN policy on the controller.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.1
cLRlanPolicyRowStatus This is the status column for this row and used to create, modify and delete specific instances of rows in this table. This table supports modification of writable objects when the RowStatus is 'active'. The following o…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.856.1.1.2.1.2
cLRlanPolicyStatus This object specifies whether the RLAN policy is enabled or not. A value of 'true' indicates that RLAN policy profile is enabled. A value of 'false' indicates that RLAN policy profile is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.3
cLRlanPolicyDesc This object describes the policy of RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.4
cLRlanPolicyIpv4Acl This object uniquely identifies the name of ipv4 ACL for given RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.5
cLRlanPolicyIpv6Acl This object uniquely identifies the name of ipv6 ACL for given RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.6
cLRlanAAAOverride This object specifies if the AAA override for global parameters is enabled or disabled. A value of 'true' indicates that AAA Override is enabled. A value of 'false' indicates that AAA Override is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.7
cLRlanCentralSwitching This object specifies if the central switching for RLAN is enabled or disabled. A value of 'true' indicates that Central Switching is enabled. A value of 'false' indicates that Central Switching is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.8
cLRlanInterface This object uniquely identifies the RLAN interface name.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.9
cLRlanPoeEnabled This object uniquely identifies RLAN Power Over Ethernet status. A value of 'true' indicates that RLAN POE is enabled. A value of 'false' indicates that RLAN POE is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.10
cLRlanHostMode This object configures the host mode for the RLAN. 0 - SINGLE_HOST_MODE, 1 - MULTI_HOST_MODE, 2 - MULTI_DOMAIN_MODE.	Enumerationr/w Enumerated Values: 0 sinlgeHostMode 1 multiHostMode 2 multiDomainMode	.1.3.6.1.4.1.9.9.856.1.1.2.1.11
cLRlanViolationMode This objecti configures the voilation mode for the RLAN. 0 - REPLACE, 1 - SHUTDOWN, 2 - PROTECT	Enumerationr/w Enumerated Values: 0 protect 1 replace 2 shutdown	.1.3.6.1.4.1.9.9.856.1.1.2.1.12
cLRlanVoiceVlanId This object specifies VLAN ID for the voice during the multi domain mode for RLAN on the controller. The host mode (cLRlanHostMode) should be set to multi-domain mode(value: 3).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.856.1.1.2.1.13
cLRlanDataVlanId This object specifies VLAN ID for the data during the multi domain mode for RLAN on the controller. The host mode (cLRlanHostMode) should be set to multi-domain mode(value: 3).	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.856.1.1.2.1.14
cLRlanBlacklistEnabled This object identifies is the blacklisting is enabled or not for the given RLAN. A value of 'true' indicates that RLAN Blacklisting is enabled. A value of 'false' indicates that RLAN Blacklisting is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.15
cLRlanBlacklistTimeout This object identifies the timeout duration in seconds for the blacklist in RLAN.	Unsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.856.1.1.2.1.16
cLRlanAAAPolicyName This object identifies the AAA policy name for the given RLAN.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.17
cLRlanSessionTimeout This object identifies the session timeout duration in seconds for RLAN.	Unsigned32r/w Constraints: range: 20-86400	.1.3.6.1.4.1.9.9.856.1.1.2.1.18
cLRlanPreAuthEnabled This object specifies if the preAuth is enabled or not for the RLAN on the controller. A value of 'true' indicates that RLAN Pre-Authentication is enabled. A value of 'false' indicates that RLAN Pre-Authentication is…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.19
cLRlanDhcpServerType This object specifies the address type DHCP parameters IP for Remote-LAN.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.856.1.1.2.1.20
cLRlanDhcpServer This object configures the DHCP parameters for Remote-LAN	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.856.1.1.2.1.21
cLRlanRadiusHttpProfilingdeprecated This object uniquely identifies Client profiling on RLAN in Radius mode based on HTTP attribute. A value of 'true' indicates that Radius HTTP profiling is enabled. A value of 'false' indicates that Radius HTTP profil…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.22
cLRlanRadiusDhcpProfilingdeprecated This object uniquely identifies Client profiling on RLAN in Radius mode based on DHCP attribute. A value of 'true' indicates that Radius DHCP profiling is enabled. A value of 'false' indicates that Radius DHCP profil…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.23
cLRlanLocalHttpProfilingdeprecated This object uniquely identifies Client profiling on RLAN in local mode based on HTTP attribute. A value of 'true' indicates that Local HTTP profiling is enabled. A value of 'false' indicates that Local HTTP profiling…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.24
cLRlanLocalDhcpProfilingdeprecated This object uniquely identifies Client profiling on RLAN in local mode based on DHCP attribute. A value of 'true' indicates that Local DHCP profiling is enabled. A value of 'false' indicates that Local DHCP profiling…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.25
cLRlanIpv6IngressStatus This object specifies if the flow monitor on ingress traffic, for IPv6, is enabled or disabled. A value of 'true' indicates that IPv6 Ingress traffic is enabled. A value of 'false' indicates that IPv6 Ingress traffic …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.26
cLRlanIpv6EgressStatus This object specifies if the flow monitor on egress traffic, for IPv6, is enabled or disabled. A value of 'true' indicates that IPv6 Engress traffic is enabled. A value of 'false' indicates that IPv6 Engress traffic i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.27
cLRlanIpv4IngressStatus This object specifies if the flow monitor on ingress traffic, for IPv4, is enabled or disabled. A value of 'true' indicates that IPv4 Ingress traffic is enabled. A value of 'false' indicates that IPv4 Ingress traffic …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.28
cLRlanIpv4EgressStatus This object specifies if the flow monitor on egress traffic, for IPv4, is enabled or disabled. A value of 'true' indicates that IPv4 Engress traffic is enabled. A value of 'false' indicates that IPv4 Engress traffic i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.29
cLRlanIpv6IngressName This object specifies the Qos profile name for flow monitor on ingress traffic, for IPv6.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.30
cLRlanIpv6EgressName This object specifies the Qos profile name for flow monitor on egress traffic, for IPv6.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.31
cLRlanIpv4IngressName This object specifies the Qos profile name for flow monitor on ingress traffic, for IPv4.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.32
cLRlanIpv4EgressName This object specifies the Qos profile name for flow monitor on egress traffic, for IPv4.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.33
cLRlanSplitTunnelGatewayType This object identifies the IP address type of gateway address for the split tunnel trafficking of the data on RLAN.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.856.1.1.2.1.34
cLRlanSplitTunnelGateway This object identifies the gateway address for the split tunnel trafficking of the data on RLAN.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.856.1.1.2.1.35
cLRlanSplitTunnelNetmaskType This object identifies the netmask for the split tunnel trafficking of the data on RLAN.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.856.1.1.2.1.36
cLRlanSplitTunnelNetmask This object identifies the netmask for the split tunnel trafficking of the data on RLAN.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.856.1.1.2.1.37
cLRlanSplitTunnel This object identifies whether the split tunnel traffic movement of the data is enabled. A value of 'true' indicates that split tunnelling is enabled. A value of 'false' indicates that split tunnelling is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.38
cLRlanAclName This object identifies the ACL name for the split tunnel data trafficking.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.39
cLRlanSplitTunnelOverride This object identifies whether the split tunnel traffic movement of the data is overriden. A value of 'true' indicates that split tunnel override is enabled. A value of 'false' indicates that split tunnel override is…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.40
cLRlanAccountingList This object specifies the AAA Accounting list associated to the given RLAN	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.9.9.856.1.1.2.1.41
cLRlanDhcpEnabled This object specifies whether the DHCP is required for the IPv4 of the given RLAN. A value of 'true' indicates that RLAN DHCP is enabled. A value of 'false' indicates that RLAN DHCP is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.42
cLRlanCentralDhcp This object specifies if the central dhcp for RLAN is enabled or disabled. A value of 'true' indicates that Central DHCP is enabled. A value of 'false' indicates that Central DHCP is disabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.856.1.1.2.1.43
cLRlanMdnsPolicy This object specifies the mDNS service policy configured under RLAN	OctetStringr/w Constraints: range: 1-64	.1.3.6.1.4.1.9.9.856.1.1.2.1.44
cLRlanPowerLevelId This object specifies the power level for port	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.856.1.1.2.1.45