cldMultipleCountryCode

CISCO-LWAPP-DOT11-MIB · .1.3.6.1.4.1.9.9.612.1.1.2
MIB view Table view

Object

scalar r/w OctetString 
This object represents the countries in which the
controller is operating. Multiple countries can be set.
The countries are displayed using a 3 letter code 
for each country separated by a comma.

Context

MIB
CISCO-LWAPP-DOT11-MIB
OID
.1.3.6.1.4.1.9.9.612.1.1.2
Type
scalar
Access
readwrite
Status
current
Parent
cldConfig
Siblings
23

Syntax

OctetString

Values & Constraints

Object Constraints
range: 1-600

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cldHtMacOperationsTable
This table represents the operational parameters at the MAC layer for the 802.11n networks managed through the controller. An agent adds an entry to this table for every 802.11n…
table-.1.3.6.1.4.1.9.9.612.1.1.1
cld11axConfigTable
This table represents the operational parameters at the MAC layer for the 802.11ax networks managed through the controller. An agent adds an entry to this table for every 802.11ax…
table-.1.3.6.1.4.1.9.9.612.1.1.10
cld11axMcsTable
This table represents the operational parameters at the MAC layer for the 802.11ax networks managed through the controller. An agent adds an entry to this table for every 802.11…
table-.1.3.6.1.4.1.9.9.612.1.1.11
cldDot11axHeCapTable
This table represents the HE capabilities at the MAC layer for the 802.11ax networks managed through the controller. An agent adds an entry to this table for every 802.11ax band o…
table-.1.3.6.1.4.1.9.9.612.1.1.12
cld11axMbssidTable
This table represents the configuration of 802.11ax specific Mbssid settings on a controller.
table-.1.3.6.1.4.1.9.9.612.1.1.13
cldDot11RxsopThresholdnode-.1.3.6.1.4.1.9.9.612.1.1.14
cld11axTargetWakeupTimeTable
This table represents the configuration of 802.11ax specific target wake-up time settings on a controller.
table-.1.3.6.1.4.1.9.9.612.1.1.15
cld11axTargetWakeupTimeBroadcastTable
This table represents the 802.11ax target wake-up time broadcast configurations on a controller.
table-.1.3.6.1.4.1.9.9.612.1.1.16
cld11axBssColorConfigTable
This table represents the configuration of network 802.11ax BSS Color settings on a controller.
table-.1.3.6.1.4.1.9.9.612.1.1.17
cld11axBssColorRadioTable
This table represents AP radio-specific 802.11ax BSS Color capability and configuration.
table-.1.3.6.1.4.1.9.9.612.1.1.18
cldConfiguredCountryTable
This table provides the list of all configured countries on the wlc.
table-.1.3.6.1.4.1.9.9.612.1.1.19
cld11axObssPdConfigTable
This table represents the configuration of network 802.11ax OBSS PD settings on a controller.
table-.1.3.6.1.4.1.9.9.612.1.1.20
cldDot11NdpModenode-.1.3.6.1.4.1.9.9.612.1.1.21
cldDot116GHzPhynode-.1.3.6.1.4.1.9.9.612.1.1.22
cldDot116GHzGlobalConfignode-.1.3.6.1.4.1.9.9.612.1.1.23
cld11beMcsTable
This table represents the operational parameters at the MAC layer for the 802.11be networks managed through the controller. An agent adds an entry to this table for every 802.11be…
table-.1.3.6.1.4.1.9.9.612.1.1.24
cldRegulatoryDomain
This object represents the regulatory domains for the controller. Regulatory domain specifies allowed 802.11 chanels. Multiple domains can be listed seperated with spaces.
scalarOctetString.1.3.6.1.4.1.9.9.612.1.1.3
cld11nMcsTable
This table lists the MCS data rates used on the 802.11n networks managed by this controller.
table-.1.3.6.1.4.1.9.9.612.1.1.4
cld11acConfignode-.1.3.6.1.4.1.9.9.612.1.1.5
cld11acMcsTable
This table is used to configure 802.11ac specific MCS data rate settings on a controller.
table-.1.3.6.1.4.1.9.9.612.1.1.6
cldCountryChangeNotifEnable
This object is used to control the generation of ciscoLwappDot11CountryChangeNotif notification. A value of 'true' indicates that the agent generates ciscoLwappDot11Cou…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.612.1.1.7
cldLoadBalancingnode-.1.3.6.1.4.1.9.9.612.1.1.8
cldBandSelectnode-.1.3.6.1.4.1.9.9.612.1.1.9