cldBandSelectCycleThreshold
CISCO-LWAPP-DOT11-MIB ·
.1.3.6.1.4.1.9.9.612.1.1.9.3
Object
scalar
r/w
milliseconds Integer32
This object specifies time threshold for a new scanning
mobile station period. Mobile station cycle counter will
increment only if mobile station scans same channel any
time after cldBandSelectCycleThreshold is passed.
For example, if a mobile station is scanning a channel after
every 150 milliseconds and cycle threshold value is
configures as 200, then cycle count will be incremented
after 300 seconds. But if mobile station is scanning after every
250 milliseconds, then mobile station count will be incremented
after 250 milliseconds.
Context
- MIB
- CISCO-LWAPP-DOT11-MIB
- OID
.1.3.6.1.4.1.9.9.612.1.1.9.3- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- cldBandSelect
- Siblings
- 6
Syntax
milliseconds Integer32
Values & Constraints
Object Constraints
range: 1-1000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldBandSelectEnable This object specifies the mode of Band Select.
Value of 1(enable) shows that the Band Select
is enabled and value of 2(disable) shows that it is
disabled.
If Band Selec… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.9.1 |
| cldBandSelectCycleCount This object specifies band select probe mobile station count.
Suppressed mobile stations and corresponding suppression count
are recorded in a suppression table which is stored in… | scalar | Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.2 |
| cldBandSelectAgeOutSuppression Suppressed mobile station are recorded in a suppression table.
This object specifies age out period after which entry
of mobile station will be removed.
All entries will stay in t… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.4 |
| cldBandSelectAgeOutDualBand This objects specifies age out period after which mobile
station entry will be removed for dual band AP.
When AP sees probe request from any mobile station in both
2.4GHz and 5GHz… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.5 |
| cldBandSelectClientRssi This object specifies minimum mobile station RSSI threshold.
Mobile stations having RSSI below this value will not be
recorded in suppressed table.
This configuration filter out f… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.6 |
| cldBandSelectClientMidRssi This object specifies medium mobile station RSSI threshold.
Mobile station between this value and cldBandSelectClientRssi
will be recorded in suppressed table but will not be deni… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.7 |