cldBandSelectCycleCount
CISCO-LWAPP-DOT11-MIB ·
.1.3.6.1.4.1.9.9.612.1.1.9.2
Object
scalar
r/w
Integer32
This object specifies band select probe mobile station count.
Suppressed mobile stations and corresponding suppression count
are recorded in a suppression table which is stored in
internal database of controllers. AP will suppress
probe request of a mobile station till value of cycle count.
AP will increment cycle counter when a mobile station scan
a channel on 2.4GHz band after any time greater than
cldBandSelectCycleThreshold.
When a mobile station cycle count is reached and if mobile
station still sends a probe request then AP will respond
to it by probe response.
For example, we assume at minimum, a mobile station
will stay in a channel for 5 milliseconds and there are
11 channels. If the mobile station scans channel 1 and then the
other 10 channels, there should be at least a gap of 10x5
milliseconds between the last time AP hears the mobile station
probe and the latest one. AP only increments the count if
the difference of time between the latest and the last
probe is more than 50 milliseconds.
Context
- MIB
- CISCO-LWAPP-DOT11-MIB
- OID
.1.3.6.1.4.1.9.9.612.1.1.9.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cldBandSelect
- Siblings
- 6
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldBandSelectEnable This object specifies the mode of Band Select.
Value of 1(enable) shows that the Band Select
is enabled and value of 2(disable) shows that it is
disabled.
If Band Selec… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.9.1 |
| cldBandSelectCycleThreshold This object specifies time threshold for a new scanning
mobile station period. Mobile station cycle counter will
increment only if mobile station scans same channel any
time aft… | scalar | milliseconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.3 |
| cldBandSelectAgeOutSuppression Suppressed mobile station are recorded in a suppression table.
This object specifies age out period after which entry
of mobile station will be removed.
All entries will stay in t… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.4 |
| cldBandSelectAgeOutDualBand This objects specifies age out period after which mobile
station entry will be removed for dual band AP.
When AP sees probe request from any mobile station in both
2.4GHz and 5GHz… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.5 |
| cldBandSelectClientRssi This object specifies minimum mobile station RSSI threshold.
Mobile stations having RSSI below this value will not be
recorded in suppressed table.
This configuration filter out f… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.6 |
| cldBandSelectClientMidRssi This object specifies medium mobile station RSSI threshold.
Mobile station between this value and cldBandSelectClientRssi
will be recorded in suppressed table but will not be deni… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.7 |