cldBandSelectAgeOutDualBand
CISCO-LWAPP-DOT11-MIB ·
.1.3.6.1.4.1.9.9.612.1.1.9.5
Object
scalar
r/w
seconds Integer32
This objects specifies age out period after which mobile
station entry will be removed for dual band AP.
When AP sees probe request from any mobile station in both
2.4GHz and 5GHz band AP will know that mobile station is
capable of operating on both band. Dual band capable
mobile stations are recorded in a dual band table which
is stored in internal database of controllers.
This record are kept to make sure 5GHz capable mobile station
should join 5GHz band only.
Entries in the table will be age out to make space for
new entries.
The AP will not respond to the dual band mobile station's
2.4GHz probe until is removed from the dual band
table. AP fills the dual band table in the
following order until it is full:
1) mobile station with 5GHz probe that have associated to
2.4GHz.
2) mobile station with 5GHz probe that also have 2.4GHz
probes.
3) mobile station with just 5GHz probe detected and 5GHz
association.
Context
- MIB
- CISCO-LWAPP-DOT11-MIB
- OID
.1.3.6.1.4.1.9.9.612.1.1.9.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cldBandSelect
- Siblings
- 6
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 10-300
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cldBandSelectEnable This object specifies the mode of Band Select.
Value of 1(enable) shows that the Band Select
is enabled and value of 2(disable) shows that it is
disabled.
If Band Selec… | scalar | Enumeration | .1.3.6.1.4.1.9.9.612.1.1.9.1 |
| cldBandSelectCycleCount This object specifies band select probe mobile station count.
Suppressed mobile stations and corresponding suppression count
are recorded in a suppression table which is stored in… | scalar | Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.2 |
| cldBandSelectCycleThreshold This object specifies time threshold for a new scanning
mobile station period. Mobile station cycle counter will
increment only if mobile station scans same channel any
time aft… | scalar | milliseconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.3 |
| cldBandSelectAgeOutSuppression Suppressed mobile station are recorded in a suppression table.
This object specifies age out period after which entry
of mobile station will be removed.
All entries will stay in t… | scalar | seconds Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.4 |
| cldBandSelectClientRssi This object specifies minimum mobile station RSSI threshold.
Mobile stations having RSSI below this value will not be
recorded in suppressed table.
This configuration filter out f… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.6 |
| cldBandSelectClientMidRssi This object specifies medium mobile station RSSI threshold.
Mobile station between this value and cldBandSelectClientRssi
will be recorded in suppressed table but will not be deni… | scalar | dBm Integer32 | .1.3.6.1.4.1.9.9.612.1.1.9.7 |