cLApStaticIpv6InetAddressType
CISCO-LWAPP-AP-MIB ·
.1.3.6.1.4.1.9.9.513.1.1.10.1.6
Object
This object specified the address type made available through cLApStaticIpv6InetAddress.
Context
- MIB
- CISCO-LWAPP-AP-MIB
- OID
.1.3.6.1.4.1.9.9.513.1.1.10.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLApExtEntry
- Table
- cLApExtTable
- Siblings
- 14
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLApLEDFlashStatus This object specifies the state of the AP LED Flash.
A value of 'true' indicates LED flash is enabled.
A value of 'false' indicates LED flash is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.1.10.1.1 |
| cLApStaticIpv6GatewayInetAddress This object specifies the IPv6 Address of the Gateway server.
This attribute can be configured only if the static IP
option is turned on in the AP. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.1.10.1.10 |
| cLApStaticIpNetmaskType This object specifies the netmask address type for AP's
static IP. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.1.10.1.11 |
| cLApStaticIpNetmask This object specifies netmask for ipv4 address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.1.10.1.12 |
| cLApPreferMode This object represents the capwap prefer-mode (ipv4 or ipv6)
of AP. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.1.10.1.13 |
| cLApPreferModeApplied This object represents the prefer-mode of AP applied by
apgroup config or global config.
apgroup - capwap prefer mode applied at ap group level.
global - capwap prefer mode applie… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.1.10.1.14 |
| cLApIndoorMode This object specifies the indoor/outdoor mode of the AP.
A value of 'true' indicates AP is in Indoor Mode.
A value of 'false' indicates AP is in Outdoor Mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.1.10.1.17 |
| cLApLEDFlashDuration This object specifies the duration for which the AP's LED
should blink. This is applicable when the value of
cLApFlashStatus is TRUE. Value of 0 indicates the blinking
for infin… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.1.10.1.2 |
| cLApInetAddressType This object specifies the type of the AP
address made available through
cLApInetAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.1.10.1.3 |
| cLApInetAddress This object specifies the address of the
Access Point. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.1.10.1.4 |
| cLApStaticIpv6AddressEnabled This object specifies that AP is
configured to use static IPv6 address.
A value of 'true' indicates AP can assign with static
IP address.
A value of 'false' indicates AP cannot … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.1.10.1.5 |
| cLApStaticIpv6InetAddress This object specifies the static IPv6 address
of the Access Point. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.1.10.1.7 |
| cLApStaticIpv6PrefixLength This object specifies the prefix length of the static IP
Address configured on the AP. | column | Unsigned32 | .1.3.6.1.4.1.9.9.513.1.1.10.1.8 |
| cLApStaticIpv6GatewayInetAddressType This object specified the address type made
available through cLApStaticIpv6GatewayInetAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.1.10.1.9 |