cLApRogueApMacAddress
CISCO-LWAPP-AP-MIB ·
.1.3.6.1.4.1.9.9.513.3.2
Object
scalar
SNMPv2-TCMacAddress
This object represents the radio MAC address common to the dot11 interfaces of the rogue AP.
Context
- MIB
- CISCO-LWAPP-AP-MIB
- OID
.1.3.6.1.4.1.9.9.513.3.2- Type
- scalar
- Access
- notifyonly
- Status
- current
- Parent
- ciscoLwappApMIBNotifObjects
- Siblings
- 39
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLApAssocFailureReason This object specifies the failure reasons when
a AP fails to associate with a controller. | scalar | CISCO-LWAPP-TC-MIBCLApAssocFailureReason | .1.3.6.1.4.1.9.9.513.3.1 |
| cLApIfUpDownFailureCode This object specifies the code of the
AP interface failure. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.3.10 |
| cLApAlarmSet This object specifies whether this event is
raise or clear.
A value of 'true' indicates this event is set.
A value of 'false' indicates this even is cleared. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.3.11 |
| cLApRogueClassType This object specifies the AP class type of the
Rogue AP detected. | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.12 |
| cLApRogueDetectedChannel This object represents the rogue
detected channel number. | scalar | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.3.13 |
| cLApRSSI This object specifies the Rogue RSSI as seen by
AP Interface. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.513.3.14 |
| cLApSNR This object specifies the SNR seen by AP
Interface from Rogue | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.513.3.15 |
| cLApDot11RadioCurrentChannel This object represents the dot11
current channel. | scalar | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.3.16 |
| cLApAdhocRogue This object represents the flag used to state if
the rogue found is an Adhoc rogue or it is an AP. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.3.17 |
| cLApRogueAPOnWiredNetwork This object represents the flag used to state if
the rogue is found on the wired network.
A value of '1' indicates Rogue AP is found on wired
network.
A value of '0' indicates Rog… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.3.18 |
| cLApRogueMode This attribute is use to specify the state in which
the Rogue AP is user can set the Rogue AP in alert,
known or acknowledge state.
Alert state means Rogue AP can be a… | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.19 |
| cLApRogueIsClassifiedByRule This object represents the flag used to state if the
rogue is classified by a rogue rule.
A value of 'true' indicates its classifed by rogue rule.
A value of 'false' indicates its… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.3.20 |
| cLApRogueClassifiedApMacAddress This object represents the radio MAC address
of the classified rogue AP. | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.513.3.21 |
| cLApRogueClassifiedRSSI This object represents the Rogue classified RSSI as
seen by Airespace AP Interface. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.513.3.22 |
| cLAPPreviousMonitorMode This object represents the previous AP monitor Mode. | scalar | CISCO-LWAPP-TC-MIBCLApMode | .1.3.6.1.4.1.9.9.513.3.23 |
| cLAPCurrentMonitorMode This object represents the current AP monitor Mode. | scalar | CISCO-LWAPP-TC-MIBCLApMode | .1.3.6.1.4.1.9.9.513.3.24 |
| cLApSsidKeyConfSsidA This object represents the SSID which has same
cipher key with another SSID on the same AP.
The another SSID is represented by cLApSsidKeyConfSsidB. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.3.25 |
| cLApSsidKeyConfKeyIdxA This object represents key index of the SSID which has same
cipher key with another SSID on the same AP.
It is the key index of cLApSsidKeyConfSsidA.
The another SSID is represent… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.3.26 |
| cLApSsidKeyConfSsidB This object represents the SSID which has same
cipher key with another SSID on the same AP.
The another SSID is represented by cLApSsidKeyConfSsidA. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.3.27 |
| cLApSsidKeyConfKeyIdxB This object represents key index of the SSID which has same
cipher key with another SSID on the same AP.
It is the key index of cLApSsidKeyConfSsidB.
The another SSID is represent… | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.3.28 |
| cLApPreviousChannel This object represents the channel before changed. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.3.29 |
| cLApDot11RadioChannelNumber This object represents the channel number of the
radio interface of the AP, represented by
cLApDot11IfType. | scalar | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.3.3 |
| cLApCurrentChannel This object represents the channel after changed. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.3.30 |
| cLApChannelCustomize This object represents the channel's change mode.
If this value is true, then bsnAPDot11CurrentChannel in
bsnAPIfDot11PhyDSSSTable is assigned by dynamic
algorithm and is read-onl… | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.31 |
| cLApIfLoadChannelUtilization This object specifies the code of the
AP Interface channel load utilization. | scalar | Integer32 | .1.3.6.1.4.1.9.9.513.3.32 |
| cLAPGroupVlanName This object specifies the code of the
AP Group Interface Name. | scalar | OctetString | .1.3.6.1.4.1.9.9.513.3.33 |
| cLApRuleName This object represents the rule name to identify
applied on the Ap. | scalar | OctetString | .1.3.6.1.4.1.9.9.513.3.34 |
| cLApSeverityScore This object is used to define the custom classification
severity score of the rules.
This object is applicable when cLRuleRogueType is configured
as 'custom'. | scalar | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.3.35 |
| cLApDot11XorRadioRoleChangeReason This object is used to identify the reason code for
radio role change of XOR radio. | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.36 |
| cLApDot11XorRadioBandChangeReason This object is used to identify the reason code for
radio band change of XOR radio. | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.37 |
| cLApBrokenAntApName This object represents the AP name of
the trap with broken antenna info. | scalar | OctetString | .1.3.6.1.4.1.9.9.513.3.38 |
| cLApBrokenAntInfo This object represents the condition of
antenna for a given AP. It denotes if
AP antenna are broken or not; if broken, then which
particular antenna (like ALL/A/B/C/D/AB/BC...) br… | scalar | OctetString | .1.3.6.1.4.1.9.9.513.3.39 |
| cLApRogueApSsid This object represents the SSID used by the
rogue AP to intrude the network. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.3.4 |
| cLApRogueDot11RadioBand This object represents the radio band of the Rouge AP. | scalar | - | .1.3.6.1.4.1.9.9.513.3.40 |
| cLApRogueType This object represents the SSID of the used by the
rogue AP to intrude the network. | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.5 |
| cLApWipsReason This object specifies the failure reasons for an AP
when cLApWipsEnable is set to 'true'.
noMonitoringDevice - No monitoring device
connected to collect WIPs informati… | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.6 |
| cLApWipsClear This object specifies whether this event is
raise or clear.
A value of 'true' indicates this event is cleared
A value of 'false' indicates this even is raised. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.3.7 |
| cLApIfUpDownFailureType This object specifies the type of the
AP interface failure.
detectedFailure(1) - Failure of radio.
configuredReset(2) - Reset due to manual
configuration. | scalar | Enumeration | .1.3.6.1.4.1.9.9.513.3.8 |
| cLApIfUpDownCause This object specifies the cause of the
AP interface failure. | scalar | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.3.9 |