cLApProfileHyperlocationTriggerThreshold
CISCO-LWAPP-AP-MIB ·
.1.3.6.1.4.1.9.9.513.1.16.1.1.47
Object
column
r/w
Unsigned32
This object represents the value of the Hyperlocation trigger threshold expressed in scan cycles. Valid range is 1 to 100 scan cycles.
Context
- MIB
- CISCO-LWAPP-AP-MIB
- OID
.1.3.6.1.4.1.9.9.513.1.16.1.1.47- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLApProfileEntry
- Table
- cLApProfileTable
- Siblings
- 98
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLApProfileName This object specifies one instance of an AP Profile on the
controller. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.1 |
| cLApProfileOeapEncryptionEnable This object specifies whether encyrption between
controller and OEAP is enabled or not in a profile.
A value of 'true' enables encryption between
controller and AP.… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.100 |
| cLApProfileOeapLocalAccessEnable This object specifies Personal SSID
broadcast
A value of 'true' enables local access of
AP Webui
A value of 'false' disables local access of
AP Webui. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.101 |
| cLApProfileOeapProvSsidEnable This object specifies Provisional SSID
broadcast
A value of 'true' enables broadcast of
Provisional SSID
A value of 'false' disables broadcast of
Pro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.102 |
| cLApProfileCountryCode This object specifies the country code for all APs
associated to this particular AP Profile. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.103 |
| cLApProfileFastHbTimerTimeout This object specifies the timeout value for the Fast Heart Beat
timer of all the APs associated to the current AP Profile. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.12 |
| cLApProfileFastHbTimerEnabled deprecated This object specifies if Fast Heart Beat Timer is enabled or
not.
A value of 'true' indicates that this timer is enabled.
A value of 'false' indicates that this timer is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.13 |
| cLApProfilePrimaryDiscoveryTimeout This object specifies the timeout value for the primary AP
discovery for a given Ap profile. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.14 |
| cLApProfileBackupPrimaryControllerAddressType This object specifies the type of the primary controller's
address made available through
cLApProfileBackupPrimaryControllerAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.15 |
| cLApProfileBackupPrimaryControllerAddress This object specifies the address of the primary controller
that the APs in the profile should associate with. The name and
address should be provided in the same set request. An … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.16 |
| cLApProfileBackupPrimaryControllerName This object specifies the name of the primary controller
that the APs in the profile should associate with. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.17 |
| cLApProfileBackupSecondaryControllerAddressType This object specifies the type of the secondary
controller's address made available through
cLApProfileBackupSecondaryControllerAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.18 |
| cLApProfileBackupSecondaryControllerAddress This object specifies the address of the secondary
controller that the APs in the profile should associate with.
The name and address should be provided in the same
set request. … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.19 |
| cLApProfileRowStatus This object specifies the row to be added or
deleted in this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.513.1.16.1.1.2 |
| cLApProfileBackupSecondaryControllerName This object specifies the name of the secondary controller
that the APs in the profile should associate. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.20 |
| cLApProfileBackupTertiaryControllerAddressType This object specifies the type of the tertiary
controller's address made available through
cLApProfileBackupTertiaryControllerAddress. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.21 |
| cLApProfileBackupTertiaryControllerAddress This object specifies the address of the tertiary
controller that the APs in the profile should associate with.
The name and address should be provided in the same
set request. An… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.22 |
| cLApProfileBackupTertiaryControllerName This object specifies the name of the tertiary controller
that the APs in the profile should associate with | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.23 |
| cLApProfileTcpMss This object specifies the AP TCP MSS value per AP profile.
The permissible value are between 536 and 1363. This will
also enable the global TCP MSS flag.
Any change of value for … | column | Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.25 |
| cLApProfileRetransmitCount This object specifies the retransmission count for the
control packet for all APs associated to this particular AP
profile. This value represents the number of packets
retransmit… | column | retries Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.26 |
| cLApProfileRetransmitTimeout This object specifies the retransmission timeout for the
control packet for all APs associated to this particular AP
profile. This value represents the timeout for each
control P… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.27 |
| cLApProfileOeapDisableLocalAccess deprecated This object specifies whether the local access is supported for
all the Office Extended Access Points associated to current AP
Profile. If set to true, the local SSID and and LAN … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.28 |
| cLApProfileLedState This object specifies whether the LED state of all the
access points associated to a profile should be enabled or
disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.29 |
| cLApProfileCredentialGlobalUserName This object specifies the global username for the APs
associated to a particular AP Profile.
This user name is used to access the console on the AP. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.3 |
| cLApProfileRadioInterfaceShutdownEnabled deprecated This object allows the user to enable or disable radio
interface of all the APs associated to current AP Profile.
When enabled, AP radio's will be shut down when ethernet link
go… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.30 |
| cLApProfileEthernetInterfaceDowntime deprecated This object specifies the ethernet interface down time after
which the AP radio interface will be shut down for Aps in a
profile. | column | Seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.31 |
| cLApProfileMulticastGroupAddressType This object specifies the AP multicast group address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.32 |
| cLApProfileMulticastGroupAddress This object specifies the IPv6 multicast group address of all
the APs associated to current AP Profile. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.33 |
| cLApProfileMulticastMode This object specifies the ethernet multicast support of all
the APs associated to current AP Profile.
unicast - Controller will convert multicast to
unicast packet.
mu… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.34 |
| cLApProfilePrimedJoinTimeout This object specifies the primed timeout for the AP
discovery for a given profile. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.35 |
| cLApProfilePreferMode This object specifies the capwap tunnel prefer-mode for all APs
associated to this particular AP Profile.
unconfig - capwap tunnel is not established.
ipv4 - capwap tunnel establi… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.36 |
| cLApProfileApLagEnabled This object specifies the ap-lag capability state of all the
APs associated to current AP profile.
A value of 'true' indicates the ap-lag capability state is
enabled.
A value of … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.37 |
| cLApProfile802dot1xAuthenticationEnabled deprecated This object represents the 802.1x supplicant authentication
feature of APs associated to current AP Profile.
If configured as True, user can configure 8021.1x
authentication betw… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.38 |
| cLApProfile802dot1xSupplicantUsername This object represents the 802.1x supplicant username that
is to be inherited by all the APs associated to current AP
Profile. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.39 |
| cLApProfileCredentialGlobalPassword This object specifies the password corresponding to
the user name represented by cLApProfileCredentialGlobalUserName
object. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.4 |
| cLApProfile802dot1xSupplicantPassword This object represents the 802.1x supplicant Password that
is to be inherited by all the APs associated to current AP
Profile.
A query on this OID will always return '****'. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.40 |
| cLApProfileEncryptionEnable This object specifies whether encyrption between
controller and AP is enabled or not in a profile. Encryption
can only be enabled if ESM card in controller is
pluged in.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.41 |
| cLApProfileTelnetEnable This object specifies whether Telnet session
can be established to the APs in a given AP profile.
A value of 'true' indicates an Telnet session
can be established … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.42 |
| cLApProfileSshEnable This object specifies whether SSH session
can be established to the APs asscoaited to an AP Profile.
A value of 'true' indicates an SSH session
can be established t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.43 |
| cLApProfileHyperlocationEnable This object represents the admin status of Hyperlocation.
A value of 'true' indicates that Hyperlocation is enabled.
A value of 'false' indicates that Hyperlocation is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.44 |
| cLApProfileHyperlocationDetectionThreshold This object represents the value of the Hyperlocation
detection threshold expressed in dBm. Valid range is
-100 dbm to -50 dbm. | column | dBm Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.45 |
| cLApProfileHyperlocationResetThreshold This object represents the value of the Hyperlocation
reset threshold expressed in scan cycles. Valid range is
0 to 99 scan cycles. Its value must always be smaller
than the trigg… | column | Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.46 |
| cLApProfileHyperlocationNtpIpAddressType This object represents the NTP server IP address type
configured for Hyperlocation feature. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.48 |
| cLApProfileHyperlocationNtpIpAddress This object represents the NTP server IP address
configured for Hyperlocation feature. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.49 |
| cLApProfileCredentialGlobalSecret This object specifies the secret key for the APs associated
to particular AP profile. This provides read-write access
to the console on the AP. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.5 |
| cLApProfileAdjustMss To enable the TCP MSS flag | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.50 |
| cLApProfileDiscoveryTimeout This object represents the timeout for the AP
discovery for a particular AP profile. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.51 |
| cLApProfileHeartBeatTimeout This object represents the Heart beat timeout for the APs in
a particular AP profile. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.52 |
| cLApProfileCdpEnable This object specifies to enable the CDP for all APs
associated to particular AP Profile | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.53 |
| cLApProfileApPacketCaptureProfile This object represents the AP packet capture profile
name mapped to this AP join profile. Access Points in this
AP join profile will use the parameters of packet capture
profile | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.54 |
| cLApProfileRogueReportInterval This object specifies the rogue report interval,
which is the interval that monitor mode APs send
rogue detection details to the controller.
This value is valid only for the curre… | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.55 |
| cLApProfileRogueMinimumRssi This object specifies the minimum value of RSSI
considered for detection of rogues.
This value is valid only for the current AP Profile. | column | dBm Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.56 |
| cLApProfileRogueTransientInterval This object specifies the rogue transient
interval for this AP Profile.
A value of '0' specifies that an AP sends
rogue detection details to the controller
as soon … | column | Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.57 |
| cLApProfileRogueContainFlexconnect This object specifies whether Rogue containment of
standalone flexconnect APs is enabled in this AP Profile.
A value of 'true' enables rogue containment.
A value of 'false' disabl… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.58 |
| cLApProfileRogueContainAutoRateEnable This object specifies whether Rogue containment auto-rate
is enabled in this AP Profile.
A value of 'true' enables auto-rate.
A value of 'false' disables auto-rate. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.59 |
| cLApProfileCredentialEnableGlobalCredentials deprecated This object specifies whether the global credentials for the
APs associated to a particular AP Profile is enabled or
disabled.
A value of 'true' enables the global… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.6 |
| cLApProfileRogueDetectionEnable This object specifies whether Rogue Detection
is enabled in this AP Profile.
A value of 'true' enables Rogue Detection.
A value of 'false' disables Rogue Detection.
Rogue detectio… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.60 |
| cLApProfileReportInterval24ghz This object specifies the interval at which APs
connected will send client statitics for 802.11b radio for a
particular AP profile. | column | seconds Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.61 |
| cLApProfileReportInterval5ghz This object specifies the interval at which APs
connected will send client statitics for 802.11a radio for a
particular AP profile | column | seconds Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.62 |
| cLApProfileDot1xApSwitchEapAuth This object specifies Dot1x EAP type
in this AP Profile. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.63 |
| cLApProfileDot1xApSwtichLscAuth This object specifies Dot1x LSC AP Auth
type in this AP Profile. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.64 |
| cLApProfileMeshProfileName This object uniquely identifies a mesh profile in a
particular AP profile. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.65 |
| cLApProfileUsbStatus This object specifies USB status(enable/disable) to be applied
to all APs belonging to this AP join profile. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.66 |
| cLApProfileVlanTagging deprecated This object specifies whether the Vlan tagging of all the APs
associated to current AP Profile should be enabled or disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.67 |
| cLApProfileApCountryCode deprecated This object represents the AP country code mapped to this
AP join profile. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.68 |
| cLApProfileExtModuleEnable This object specifies whether extended module
is enabled in this AP Profile.
A value of 'true' enables extended module.
A value of 'false' disables extended module. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.69 |
| cLApProfileLinkLatencyEnable This object specifies to the configuration of the Link
Latency on the APs associated to a particular AP profile.
disable - disables the link latency on the APs associated to
… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.7 |
| cLApProfileStatsTimer This object specifies the duration of the
stats timer value in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.70 |
| cLApProfilePoePreStandardSwitchFlag This object specifies whether the Pre-standard
switch state as PoE option.
A value of 'true' enables Pre-standard switch.
A value of 'false' disables Pre-standard switch. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.71 |
| cLApProfilePoePowerInjectorSelection This object specifies the Power over Ethernet (PoE) injector
state for all the APs associated to current AP profile.
A value of '1' represents the state of PoE injector is unknown… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.72 |
| cLApProfilePoeInjectorSwitchMac This object represents the MAC address of the
switch port that has a Power injector. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.73 |
| cLApProfileHaloBleBeaconAdvertisedPwr This object specifies the Power for HALO BLE beacon
advertisement. | column | dBm Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.74 |
| cLApProfileTftpDownGradeAddressType This object represents the TFTP servers
address type in use. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.75 |
| cLApProfileTftpDownGradeAddress This object represents the TFTP servers
IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.76 |
| cLApProfileTftpDownGradeFileName This object represents the AP image downgrade
file name on the TFTP server. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.77 |
| cLApProfileCoreDumpType This object specifies whether coredump is enabled and
whether it is in compress or uncompress.
A value of '1' represents uncompressed form of core dump file.
A value of '2' repres… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.78 |
| cLApProfileCoreDumpTftpAddressType This object represents the TFTP server address type used
for AP core dump transfer. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.513.1.16.1.1.79 |
| cLApProfileHaloBleBeaconInterval This object specifies the time interval between HALO BLE
beacon transmissions.
This value is common to HALO enabled APs that have joined the
controller under the same AP profile. | column | Hz Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.8 |
| cLApProfileCoreDumpTftpAddress This object represents the TFTP server address used for AP
core dump transfer. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.513.1.16.1.1.80 |
| cLApProfileCoreDumpCoreFileName This object represents core dump file name
on the TFTP server. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.16.1.1.81 |
| cLApProfileBackupFallbackEnabled This object represents fallback status of APs asscoaited
to an AP Profile.
A value of 'true' represents AP fallback enabled.
A value of 'false' represents AP fallback disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.82 |
| cLApProfileClientRssiStatsEnabled This object represents the status of Client RSSI
statistics from Access Point.
A value of 'true' represents Client RSSI statistics reporting from
AP is enabled.
A value of 'fals… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.83 |
| cLApProfileClientRssiStatsReportInterval This object represents Client RSSI statistics reporting interval
value in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.84 |
| cLApProfileGasRateLimitEnable This object represents the GAS limit status of APs associated
to an AP Profile.
A value of 'true' represents AP GAS limit enabled.
A value of 'false' represents AP GAS disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.85 |
| cLApProfileGasRateLimitNumReqPerInterval This object specifies the maximum number of GAS messages
per interval. | column | packets Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.86 |
| cLApProfileGasRateLimitIntervalMsec This object specifies the interval for GAS message limit. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.87 |
| cLApProfileQoSMapApTrustsUpstreamDSCP This object specifies whether the APs associated
with an AP Profile use the upstream/received DSCP
for outer CAPWAP tunnel QoS marking instead of
802.11 User Priority.
A value of … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.88 |
| cLApProfileUdpliteState This object specifies the capwap tunnel ipv6 UDP-Lite checksum type
for all APs associated to this particular AP Profile.
unconfig - capwap tunnel is not established.
udplite_enab… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.89 |
| cLApProfileMethodListName This object specifies the method list used for the AP
accounting | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.1.16.1.1.90 |
| cLApProfileWindowSize This object specifies the capwap window size for
capwap multiwindow | column | Integer32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.91 |
| cLApProfileCredentialGlobalSecretType This object specifies the secret password type corresponding to
the secret password type represented by cLApProfileCredentialGlobalSecret
object. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.92 |
| cLApProfileCredentialGlobalPasswordType This object specifies the secret password type corresponding to
the secret password type represented by cLApProfileCredentialGlobalSecret
object. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.93 |
| cLApProfile802dot1xSupplicantPasswordType This object specifies the dot1xSupplicant password type corresponding to
the dot1xSupplicantPassword represented by
cLApProfile802dot1xSupplicantPassword object. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.16.1.1.94 |
| cLApProfileBssidEnableStats This object specifies whether the BSSID stats feature
is enabled or disabled per ap config profile
- A value of 'true' represents the BSSID stats as enabled.
- A Value of 'false' … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.95 |
| cLApProfileBssidStatsFrequency This object specifies the BSSID stats frequency set on the AP for
sending the stats in the current AP profile | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.513.1.16.1.1.96 |
| cLApProfilePersistentSsidBroadcastEnable This object specifies whether persistent SSID broadcast
is enabled or disabled per ap config profile
- A value of 'true' represents persistent SSID broadcast is enabled.
- A Valu… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.97 |
| cLApProfileDhcpFallback This object specifies whether the AP fallback to DHCP
is enabled or disabled per ap config profile
- A value of 'true' represents that AP moves to DHCP if it fails to join contro… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.98 |
| cLApProfileOeapRogueDetectionEnable This object specifies whether Rogue Detection
is enabled for OEAP.
A value of 'true' indicates rogue detection is enabled.
A value of 'false' indicates rogue detection is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.16.1.1.99 |