cLApLEDFlashDuration

CISCO-LWAPP-AP-MIB · .1.3.6.1.4.1.9.9.513.1.1.10.1.2
MIB view Table view

Object

column r/w seconds SNMPv2-SMIUnsigned32 
This object specifies the duration for which the AP's LED
should blink. This is applicable when the value of 
cLApFlashStatus is TRUE. Value of 0 indicates the blinking 
for infinite duration.

Context

MIB
CISCO-LWAPP-AP-MIB
OID
.1.3.6.1.4.1.9.9.513.1.1.10.1.2
Type
column
Access
readwrite
Status
current
Units
seconds
Parent
cLApExtEntry
Table
cLApExtTable
Siblings
14

Syntax

seconds SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cLApLEDFlashStatus
This object specifies the state of the AP LED Flash. A value of 'true' indicates LED flash is enabled. A value of 'false' indicates LED flash is disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.1.10.1.1
cLApStaticIpv6GatewayInetAddress
This object specifies the IPv6 Address of the Gateway server. This attribute can be configured only if the static IP option is turned on in the AP.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.513.1.1.10.1.10
cLApStaticIpNetmaskType
This object specifies the netmask address type for AP's static IP.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.513.1.1.10.1.11
cLApStaticIpNetmask
This object specifies netmask for ipv4 address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.513.1.1.10.1.12
cLApPreferMode
This object represents the capwap prefer-mode (ipv4 or ipv6) of AP.
columnEnumeration.1.3.6.1.4.1.9.9.513.1.1.10.1.13
cLApPreferModeApplied
This object represents the prefer-mode of AP applied by apgroup config or global config. apgroup - capwap prefer mode applied at ap group level. global - capwap prefer mode applie…
columnEnumeration.1.3.6.1.4.1.9.9.513.1.1.10.1.14
cLApIndoorMode
This object specifies the indoor/outdoor mode of the AP. A value of 'true' indicates AP is in Indoor Mode. A value of 'false' indicates AP is in Outdoor Mode.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.1.10.1.17
cLApInetAddressType
This object specifies the type of the AP address made available through cLApInetAddress.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.513.1.1.10.1.3
cLApInetAddress
This object specifies the address of the Access Point.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.513.1.1.10.1.4
cLApStaticIpv6AddressEnabled
This object specifies that AP is configured to use static IPv6 address. A value of 'true' indicates AP can assign with static IP address. A value of 'false' indicates AP cannot …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.1.10.1.5
cLApStaticIpv6InetAddressType
This object specified the address type made available through cLApStaticIpv6InetAddress.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.513.1.1.10.1.6
cLApStaticIpv6InetAddress
This object specifies the static IPv6 address of the Access Point.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.513.1.1.10.1.7
cLApStaticIpv6PrefixLength
This object specifies the prefix length of the static IP Address configured on the AP.
columnUnsigned32.1.3.6.1.4.1.9.9.513.1.1.10.1.8
cLApStaticIpv6GatewayInetAddressType
This object specified the address type made available through cLApStaticIpv6GatewayInetAddress.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.513.1.1.10.1.9