cLApFraCoverageOverlapFactor

CISCO-LWAPP-AP-MIB · .1.3.6.1.4.1.9.9.513.1.2.1.1.32
MIB view Table view

Object

column percentage SNMPv2-SMIInteger32 
This object represents the COF(Coverage Overlap Factor) in
percentage.COF represents overlap on a given radio's transmit
cell size by its adjacent neighbors.When COF value is higher
than FRA(Flexible Radio Assignment) sensitivity, given radio
will be most likely marked as redundant by FRA algorithm.

Context

MIB
CISCO-LWAPP-AP-MIB
OID
.1.3.6.1.4.1.9.9.513.1.2.1.1.32
Type
column
Access
readonly
Status
current
Units
percentage
Parent
cLApDot11IfEntry
Table
cLApDot11IfTable
Siblings
41

Syntax

percentage SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cLApDot11IfSlotId
This object represents the slot ID of a dot11 interface on an AP. The slot ID for a particular dot11 interface as represented by this object ranges from 0 to cLAp…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.1
cLApLomFourthChannel
This object specifies the fourth location channel that is being monitored.
columnCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.1.2.1.1.10
cLApExtensionChannel deprecated
This object specifies the extension channel. This is applicable when the channel bandwidth is set to 40mhz.
columnCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.1.2.1.1.11
cLApLegacyBeamForming
This object indicates the status of legacy beam forming in this AP. This object is applicable only for 11n supported APs. For APs that does not support legacy beam forming, a get …
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.12
cLApCdpOverAirEnabled
This object specifies the status of Cisco Discovery Protocol(CDP) in this interface, represented by cLApDot11IfSlotId of the AP, represented by cLApSysMacAddress. A value of 'true…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.13
cLApDot11IfAdminStatus
This object specifies the AP's interface admin status. A value of 'true' indicates admin state is up. A value of 'false' indicates admin state is down.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.14
cLApDot11IfLinkChangeCount
This object represents the link change count of a dot11 interface on an AP.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.15
cLApDot11MaxClients
This object specifies the max supported associated clients of a dot11 interface on an AP.
columnUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.16
cLApPromiscuousModeDwelling
This object represents the percentage of time for the dot11 interface of an Access Point spent in promiscuous mode dwelling.
columnpercentage SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.17
cLApDot11IfStaKeepingTime
This object represents the time in hundredths of a second since the last dot11 interface state changed.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.9.9.513.1.2.1.1.18
cLApDot11IfLinkSpeed
This object represents the speed of the interface in units of 1,000,000 bits per second.
columnbps SNMPv2-SMIGauge32.1.3.6.1.4.1.9.9.513.1.2.1.1.19
cLApDot11IfType
This object represents the type of this dot11 interface.
columnCISCO-LWAPP-TC-MIBCLApIfType.1.3.6.1.4.1.9.9.513.1.2.1.1.2
cLApDot11IfMtu
This object represents interface's MTU value.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.20
cLApDot11IfDesc
This object represents the description of this interface.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.1.2.1.1.21
cLApDot11acSupport
This objects represents whether 802.11ac support is enabled on this AP. A value of 'true' indicates 11ac support for slot is enabled. A value of 'false' indicates 11ac support for…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.22
cLAp11ChannelBandwidth
This object specifies the channel bandwidth for this AP. This applies to 802.11n and 802.11ac networks only.
columnmhz Enumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.23
cLApExtensionChannels
This object represents the extension channels separated by commas. This is applicable when the channel bandwidth is set to 40mhz or 80mhz.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.1.2.1.1.24
cLAPDot11IfMinTxPowerStep
This object represents minimum adjust step of the AP radio TX power. The power step is coded as an unsigned integer in units of dbm.
columndbm SNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.25
cLApDot11XorRadioMode
This object specifies the radio mode for the AP which has XOR radio. servingClients - xor radio is configured to serve the clients (local/flexconnect/bridge). mo…
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.26
cLApDot11XorRadioBand
This object specifies the operating band of the dot11 interface of an AP. radioband24G - operating band for xor radio is 2.4GHz. radioband5G - operating band for xor radio is 5GH…
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.27
cLApDot11XorRadioRoleAssignment
This object specifies the radio role assignment of XOR radio. auto - xor radio configured to change band/mode automatically. manual - xor radio's band/mode can be configured manua…
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.28
cLApDot11IfMaxDataRate
This object represents the maximum data rate of a dot11 interface on an AP in Mbps.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.29
cLApDot11IfRegDomain
This object represents the regulatory domain for this radio type on this AP.
columnOctetString.1.3.6.1.4.1.9.9.513.1.2.1.1.3
cLApDot11IfSensorReachability
This object represents sensor radio's ability to cover localized RF neighbors.It represents value in percentage which shows percentage of neighbors covered by this sensor.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.1.2.1.1.30
cLApDot11axSupport
This objects represents whether 802.11ax support is enabled on this AP. A value of 'true' indicates 11ax support for slot is enabled. A value of 'false' indicates 11ax support for…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.31
cLApFraSuggestedMode
This object represents the band/mode XOR radio can move to, for better performance. static - XOR radio's band/mode is in manual assignment. none - FRA(Flexible Radio Assignment) a…
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.33
cLApDot11IfDualRadioMode deprecated
This object represents dual radio mode status of radio enabled - Dual radio mode is enabled. disabled- Dual radio mode is disabled. None - Radio is not dual radio mode capable.
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.34
cLApDot11IfDualRadioCapable deprecated
This object represents whether radio is dual radio capable or not
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.35
cLApDot11IfRadioFRACapable deprecated
This object represents whether radio is FRA capable or not.
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.36
cLApDot11IfPhyS80EightyChannelNumber
Secondary 80MHz channel number of the AP Interface. Allowed channel numbers also depends on the current Country Code set in the Switch.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.513.1.2.1.1.37
cLApDot11IfDualRadioOperation deprecated
This object represents dual radio mode operation of the slot. auto - Dual radio mode is automatic. manual - Dual radio mode is configurable manually. none - Radio is not dual radi…
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.39
cLApDot11nSupport
This objects represents whether 11n support is enabled on this radio. A value of 'true' indicates 11n support is enabled. A value of 'false' indicates 11n support is disabled.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.4
cLApDot11IfRadioRoleOperation deprecated
This object represents the radio role operation of the slot. auto - Radio role assignment is automatic. manual - Radio role assignment is manual.
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.40
cLApDot11IfRadioRole deprecated
This object represents the role for the slot. local - The means the slot is capable of serving clients. monitor - The slot does not serves client, only monitors.
columnEnumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.41
cLApDot11IfRptncPresent
This object represents whether Self Identifying Antenna RP-TNC is present for the radio. A value of 'true' indicates SIA RP-TNC is present. A value of 'false' indicates SIA RP-TNC…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.42
cLApDot11IfDartPresent
This object represents whether Self Identifying Antenna DART is present for the radio A value of 'true' indicates SIA DART is present. A value of 'false' indicates SIA DART is not…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.43
cLAp11nChannelBandwidth
This object specifies the channel bandwidth for this AP. This applies to 802.11n networks only. This has been deprecated for cLAp11ChannelBandwidth.
columnmhz Enumeration.1.3.6.1.4.1.9.9.513.1.2.1.1.5
cLApLomEnabled deprecated
This object indicates whether this AP is being monitored by the location server. A value of 'true' indicates that the monitoring is enabled. A value of 'false' indicates that th…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.1.2.1.1.6
cLApLomFirstChannel
This object specifies the first location channel that is being monitored.
columnCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.1.2.1.1.7
cLApLomSecondChannel
This object specifies the second location channel that is being monitored.
columnCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.1.2.1.1.8
cLApLomThirdChannel
This object specifies the third location channel that is being monitored.
columnCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.1.2.1.1.9