cLApDot11MaxClients
CISCO-LWAPP-AP-MIB ·
.1.3.6.1.4.1.9.9.513.1.2.1.1.16
Object
column
r/w
Unsigned32
This object specifies the max supported associated clients of a dot11 interface on an AP.
Context
- MIB
- CISCO-LWAPP-AP-MIB
- OID
.1.3.6.1.4.1.9.9.513.1.2.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cLApDot11IfEntry
- Table
- cLApDot11IfTable
- Siblings
- 41
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 1-200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLApDot11IfSlotId This object represents the slot ID of a dot11
interface on an AP.
The slot ID for a particular dot11 interface as
represented by this object ranges from 0 to
cLAp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.1 |
| cLApLomFourthChannel This object specifies the fourth location
channel that is being monitored. | column | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.1.2.1.1.10 |
| cLApExtensionChannel deprecated This object specifies the extension channel. This is
applicable when the channel bandwidth is set to 40mhz. | column | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.1.2.1.1.11 |
| cLApLegacyBeamForming This object indicates the status of legacy beam forming
in this AP. This object is applicable only for
11n supported APs.
For APs that does not support legacy beam forming,
a get … | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.12 |
| cLApCdpOverAirEnabled This object specifies the status of Cisco Discovery
Protocol(CDP) in this interface, represented by
cLApDot11IfSlotId of the AP, represented by
cLApSysMacAddress.
A value of 'true… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.13 |
| cLApDot11IfAdminStatus This object specifies the AP's interface admin
status.
A value of 'true' indicates admin state is up.
A value of 'false' indicates admin state is down. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.14 |
| cLApDot11IfLinkChangeCount This object represents the link change count of a dot11
interface on an AP. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.15 |
| cLApPromiscuousModeDwelling This object represents the percentage of time for the dot11
interface of an Access Point spent in promiscuous mode
dwelling. | column | percentage SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.17 |
| cLApDot11IfStaKeepingTime This object represents the time in hundredths
of a second since the last dot11 interface state changed. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.513.1.2.1.1.18 |
| cLApDot11IfLinkSpeed This object represents the speed of the interface
in units of 1,000,000 bits per second. | column | bps SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.19 |
| cLApDot11IfType This object represents the type of this dot11
interface. | column | CISCO-LWAPP-TC-MIBCLApIfType | .1.3.6.1.4.1.9.9.513.1.2.1.1.2 |
| cLApDot11IfMtu This object represents interface's MTU value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.20 |
| cLApDot11IfDesc This object represents the description of this interface. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.1.2.1.1.21 |
| cLApDot11acSupport This objects represents whether 802.11ac support is
enabled on this AP.
A value of 'true' indicates 11ac support for slot is
enabled.
A value of 'false' indicates 11ac support for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.22 |
| cLAp11ChannelBandwidth This object specifies the channel bandwidth for
this AP. This applies to 802.11n and 802.11ac networks only. | column | mhz Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.23 |
| cLApExtensionChannels This object represents the extension channels separated by
commas. This is applicable when the channel bandwidth is set
to 40mhz or 80mhz. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.513.1.2.1.1.24 |
| cLAPDot11IfMinTxPowerStep This object represents minimum adjust step of the AP radio TX
power. The power step is coded as an unsigned integer in units
of dbm. | column | dbm SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.25 |
| cLApDot11XorRadioMode This object specifies the radio mode for
the AP which has XOR radio.
servingClients - xor radio is configured to
serve the clients (local/flexconnect/bridge).
mo… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.26 |
| cLApDot11XorRadioBand This object specifies the operating band of
the dot11 interface of an AP.
radioband24G - operating band for xor radio is 2.4GHz.
radioband5G - operating band for xor radio is 5GH… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.27 |
| cLApDot11XorRadioRoleAssignment This object specifies the radio role assignment of
XOR radio.
auto - xor radio configured to change band/mode automatically.
manual - xor radio's band/mode can be configured manua… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.28 |
| cLApDot11IfMaxDataRate This object represents the maximum data rate of a dot11
interface on an AP in Mbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.29 |
| cLApDot11IfRegDomain This object represents the regulatory domain for
this radio type on this AP. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.2.1.1.3 |
| cLApDot11IfSensorReachability This object represents sensor radio's ability to cover
localized RF neighbors.It represents value in percentage
which shows percentage of neighbors covered by this sensor. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.30 |
| cLApDot11axSupport This objects represents whether 802.11ax support is
enabled on this AP.
A value of 'true' indicates 11ax support for slot is
enabled.
A value of 'false' indicates 11ax support for… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.31 |
| cLApFraCoverageOverlapFactor This object represents the COF(Coverage Overlap Factor) in
percentage.COF represents overlap on a given radio's transmit
cell size by its adjacent neighbors.When COF value is high… | column | percentage SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.32 |
| cLApFraSuggestedMode This object represents the band/mode XOR radio can move to,
for better performance.
static - XOR radio's band/mode is in manual assignment.
none - FRA(Flexible Radio Assignment) a… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.33 |
| cLApDot11IfDualRadioMode deprecated This object represents dual radio mode status of radio
enabled - Dual radio mode is enabled.
disabled- Dual radio mode is disabled.
None - Radio is not dual radio mode capable. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.34 |
| cLApDot11IfDualRadioCapable deprecated This object represents whether radio is dual radio capable or
not | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.35 |
| cLApDot11IfRadioFRACapable deprecated This object represents whether radio is FRA capable or not. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.36 |
| cLApDot11IfPhyS80EightyChannelNumber Secondary 80MHz channel number of the AP Interface.
Allowed channel numbers also depends on the current
Country Code set in the Switch. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.513.1.2.1.1.37 |
| cLApDot11IfDualRadioOperation deprecated This object represents dual radio mode operation of
the slot.
auto - Dual radio mode is automatic.
manual - Dual radio mode is configurable manually.
none - Radio is not dual radi… | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.39 |
| cLApDot11nSupport This objects represents whether 11n support is enabled
on this radio.
A value of 'true' indicates 11n support is enabled.
A value of 'false' indicates 11n support is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.4 |
| cLApDot11IfRadioRoleOperation deprecated This object represents the radio role operation
of the slot.
auto - Radio role assignment is automatic.
manual - Radio role assignment is manual. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.40 |
| cLApDot11IfRadioRole deprecated This object represents the role for the slot.
local - The means the slot is capable of serving clients.
monitor - The slot does not serves client, only monitors. | column | Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.41 |
| cLApDot11IfRptncPresent This object represents whether Self Identifying Antenna RP-TNC is
present for the radio.
A value of 'true' indicates SIA RP-TNC is present.
A value of 'false' indicates SIA RP-TNC… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.42 |
| cLApDot11IfDartPresent This object represents whether Self Identifying Antenna DART is
present for the radio
A value of 'true' indicates SIA DART is present.
A value of 'false' indicates SIA DART is not… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.43 |
| cLAp11nChannelBandwidth This object specifies the channel bandwidth for
this AP. This applies to 802.11n networks only.
This has been deprecated for cLAp11ChannelBandwidth. | column | mhz Enumeration | .1.3.6.1.4.1.9.9.513.1.2.1.1.5 |
| cLApLomEnabled deprecated This object indicates whether this AP is being monitored
by the location server. A value of 'true' indicates that
the monitoring is enabled. A value of 'false' indicates
that th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.2.1.1.6 |
| cLApLomFirstChannel This object specifies the first location channel that is
being monitored. | column | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.1.2.1.1.7 |
| cLApLomSecondChannel This object specifies the second location channel that
is being monitored. | column | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.1.2.1.1.8 |
| cLApLomThirdChannel This object specifies the third location
channel that is being monitored. | column | CISCO-LWAPP-TC-MIBCLDot11Channel | .1.3.6.1.4.1.9.9.513.1.2.1.1.9 |