cLApBleBeaconAdvTxPower
CISCO-LWAPP-AP-MIB ·
.1.3.6.1.4.1.9.9.513.1.13.3.1.8
Object
column
r/w
Hz Unsigned32
This object specifies the beacon advertised transmission power in the BLE beacon payload. This value is common to all beacons for a single AP.
Context
- MIB
- CISCO-LWAPP-AP-MIB
- OID
.1.3.6.1.4.1.9.9.513.1.13.3.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- Hz
- Parent
- cLApBleBeaconEntry
- Table
- cLApBleBeaconTable
- Siblings
- 7
Syntax
Hz Unsigned32
Values & Constraints
Object Constraints
range: 40-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cLApBleBeaconMajorField This object specifies the Major value of ibeacon
that is used to differentiate ibeacons that have the same
proximity UUID. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.13.3.1.1 |
| cLApBleBeaconMinorField This object specifies the Minor value of ibeacon
that is used to differentiate ibeacons that have the same
proximity UUID and has same major value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.513.1.13.3.1.2 |
| cLApBleBeaconTxPower This object specifies TX power of particular ibeacon for
specified HALO enabled AP. The TX power value is based on
the size of proximity zone needed. | column | dBm Unsigned32 | .1.3.6.1.4.1.9.9.513.1.13.3.1.3 |
| cLApBleBeaconStatus This object specifies the status of the BLE beacons.
A value of 'true' indicates BLE beacon is enabled,
A value of 'false' indicates BLE beacon is disabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.13.3.1.4 |
| cLApBleBeaconUuid This object specifies the UUID (universally unique identifier)
which is a 128-bit value. | column | OctetString | .1.3.6.1.4.1.9.9.513.1.13.3.1.5 |
| cLApBleBeaconInterval This object specifies the beacon interval
between each transmissions from BLE module.
This value is common to HALO enabled APs that
have joined the controller. | column | Hz Unsigned32 | .1.3.6.1.4.1.9.9.513.1.13.3.1.6 |
| cLApBleBeaconApplyGlobal This object specifies to clear all BLE configuration at AP.
A value of 'true' indicates configurations need to be cleared.
A value of 'false' indicates configurations need not be … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.513.1.13.3.1.7 |