cLAPGroupVlanName

CISCO-LWAPP-AP-MIB · .1.3.6.1.4.1.9.9.513.3.33
MIB view Table view

Object

scalar OctetString 
This object specifies the code of the
AP Group Interface Name.

Context

MIB
CISCO-LWAPP-AP-MIB
OID
.1.3.6.1.4.1.9.9.513.3.33
Type
scalar
Access
notifyonly
Status
current
Parent
ciscoLwappApMIBNotifObjects
Siblings
39

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cLApAssocFailureReason
This object specifies the failure reasons when a AP fails to associate with a controller.
scalarCISCO-LWAPP-TC-MIBCLApAssocFailureReason.1.3.6.1.4.1.9.9.513.3.1
cLApIfUpDownFailureCode
This object specifies the code of the AP interface failure.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.3.10
cLApAlarmSet
This object specifies whether this event is raise or clear. A value of 'true' indicates this event is set. A value of 'false' indicates this even is cleared.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.3.11
cLApRogueClassType
This object specifies the AP class type of the Rogue AP detected.
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.12
cLApRogueDetectedChannel
This object represents the rogue detected channel number.
scalarCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.3.13
cLApRSSI
This object specifies the Rogue RSSI as seen by AP Interface.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.513.3.14
cLApSNR
This object specifies the SNR seen by AP Interface from Rogue
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.513.3.15
cLApDot11RadioCurrentChannel
This object represents the dot11 current channel.
scalarCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.3.16
cLApAdhocRogue
This object represents the flag used to state if the rogue found is an Adhoc rogue or it is an AP.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.3.17
cLApRogueAPOnWiredNetwork
This object represents the flag used to state if the rogue is found on the wired network. A value of '1' indicates Rogue AP is found on wired network. A value of '0' indicates Rog…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.3.18
cLApRogueMode
This attribute is use to specify the state in which the Rogue AP is user can set the Rogue AP in alert, known or acknowledge state. Alert state means Rogue AP can be a…
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.19
cLApRogueApMacAddress
This object represents the radio MAC address common to the dot11 interfaces of the rogue AP.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.9.9.513.3.2
cLApRogueIsClassifiedByRule
This object represents the flag used to state if the rogue is classified by a rogue rule. A value of 'true' indicates its classifed by rogue rule. A value of 'false' indicates its…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.3.20
cLApRogueClassifiedApMacAddress
This object represents the radio MAC address of the classified rogue AP.
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.9.9.513.3.21
cLApRogueClassifiedRSSI
This object represents the Rogue classified RSSI as seen by Airespace AP Interface.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.513.3.22
cLAPPreviousMonitorMode
This object represents the previous AP monitor Mode.
scalarCISCO-LWAPP-TC-MIBCLApMode.1.3.6.1.4.1.9.9.513.3.23
cLAPCurrentMonitorMode
This object represents the current AP monitor Mode.
scalarCISCO-LWAPP-TC-MIBCLApMode.1.3.6.1.4.1.9.9.513.3.24
cLApSsidKeyConfSsidA
This object represents the SSID which has same cipher key with another SSID on the same AP. The another SSID is represented by cLApSsidKeyConfSsidB.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.3.25
cLApSsidKeyConfKeyIdxA
This object represents key index of the SSID which has same cipher key with another SSID on the same AP. It is the key index of cLApSsidKeyConfSsidA. The another SSID is represent…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.3.26
cLApSsidKeyConfSsidB
This object represents the SSID which has same cipher key with another SSID on the same AP. The another SSID is represented by cLApSsidKeyConfSsidA.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.3.27
cLApSsidKeyConfKeyIdxB
This object represents key index of the SSID which has same cipher key with another SSID on the same AP. It is the key index of cLApSsidKeyConfSsidB. The another SSID is represent…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.3.28
cLApPreviousChannel
This object represents the channel before changed.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.3.29
cLApDot11RadioChannelNumber
This object represents the channel number of the radio interface of the AP, represented by cLApDot11IfType.
scalarCISCO-LWAPP-TC-MIBCLDot11Channel.1.3.6.1.4.1.9.9.513.3.3
cLApCurrentChannel
This object represents the channel after changed.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.3.30
cLApChannelCustomize
This object represents the channel's change mode. If this value is true, then bsnAPDot11CurrentChannel in bsnAPIfDot11PhyDSSSTable is assigned by dynamic algorithm and is read-onl…
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.31
cLApIfLoadChannelUtilization
This object specifies the code of the AP Interface channel load utilization.
scalarInteger32.1.3.6.1.4.1.9.9.513.3.32
cLApRuleName
This object represents the rule name to identify applied on the Ap.
scalarOctetString.1.3.6.1.4.1.9.9.513.3.34
cLApSeverityScore
This object is used to define the custom classification severity score of the rules. This object is applicable when cLRuleRogueType is configured as 'custom'.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.9.9.513.3.35
cLApDot11XorRadioRoleChangeReason
This object is used to identify the reason code for radio role change of XOR radio.
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.36
cLApDot11XorRadioBandChangeReason
This object is used to identify the reason code for radio band change of XOR radio.
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.37
cLApBrokenAntApName
This object represents the AP name of the trap with broken antenna info.
scalarOctetString.1.3.6.1.4.1.9.9.513.3.38
cLApBrokenAntInfo
This object represents the condition of antenna for a given AP. It denotes if AP antenna are broken or not; if broken, then which particular antenna (like ALL/A/B/C/D/AB/BC...) br…
scalarOctetString.1.3.6.1.4.1.9.9.513.3.39
cLApRogueApSsid
This object represents the SSID used by the rogue AP to intrude the network.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.3.4
cLApRogueDot11RadioBand
This object represents the radio band of the Rouge AP.
scalar-.1.3.6.1.4.1.9.9.513.3.40
cLApRogueType
This object represents the SSID of the used by the rogue AP to intrude the network.
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.5
cLApWipsReason
This object specifies the failure reasons for an AP when cLApWipsEnable is set to 'true'. noMonitoringDevice - No monitoring device connected to collect WIPs informati…
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.6
cLApWipsClear
This object specifies whether this event is raise or clear. A value of 'true' indicates this event is cleared A value of 'false' indicates this even is raised.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.513.3.7
cLApIfUpDownFailureType
This object specifies the type of the AP interface failure. detectedFailure(1) - Failure of radio. configuredReset(2) - Reset due to manual configuration.
scalarEnumeration.1.3.6.1.4.1.9.9.513.3.8
cLApIfUpDownCause
This object specifies the cause of the AP interface failure.
scalarSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.513.3.9