cipslaReactThresholdRising
CISCO-IPSLA-AUTOMEASURE-MIB ·
.1.3.6.1.4.1.9.9.633.1.3.1.5
Object
This object defines the higher threshold limit.
If the value ( e.g rtt, jitterAvg, packetLossSD etc ) rises
above this limit and if the condition specified in
cipslaReactThresholdType is satisfied, a notification is
generated.
Default value of cipslaReactThresholdRising for
'rtt' is 5000
'jitterAvg' is 100.
'jitterSDAvg' is 100.
'jitterDSAvg' 100.
'packetLossSD' is 10000.
'packetLossDS' is 10000.
'mos' is 500.
'icpif' is 93.
'packetMIA' is 10000.
'packetLateArrival' is 10000.
'packetOutOfSequence' is 10000.
'maxOfPositiveSD' is 10000.
'maxOfNegativeSD' is 10000.
'maxOfPositiveDS' is 10000.
'maxOfNegativeDS' is 10000.
'successivePacketLoss' is 1000.
'maxOfLatencyDS' is 5000.
'maxOfLatencySD' is 5000.
'latencyDSAvg' is 5000.
'latencySDAvg' is 5000.
'packetLoss' is 10000.
This object is not applicable if the cipslaReactVar is
'timeout', 'connectionLoss' or 'verifyError'. For 'timeout',
'connectionLoss' and 'verifyError' default value of
cipslaReactThresholdRising will be 0.
Context
- MIB
- CISCO-IPSLA-AUTOMEASURE-MIB
- OID
.1.3.6.1.4.1.9.9.633.1.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cipslaReactEntry
- Table
- cipslaReactTable
- Siblings
- 9
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cipslaReactConfigIndex This object along with cipslaAutoGroupOperType and
cipslaAutoGroupOperTemplateName identifies
a particular reaction-configuration for one IP SLA
template.
This num… | column | Unsigned32 | .1.3.6.1.4.1.9.9.633.1.3.1.1 |
| cipslaReactRowStatus This objects indicates the status of the conceptual
Reaction Control Row.
When this object moves to active state, the conceptual row
is monitored and notification… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.633.1.3.1.10 |
| cipslaReactVar This object specifies the type of reaction configured for an
IP SLA template. Default value is 'rtt' for ICMP echo, UDP echo
and TCP connect. Default value is 'jitterAvg' for UDP … | column | CISCO-IPSLA-TC-MIBIpSlaReactVar | .1.3.6.1.4.1.9.9.633.1.3.1.2 |
| cipslaReactThresholdType This object specifies the conditions under which
a notification ( trap ) is sent. The rttMonReactOccurred
object defined in rttMonReactTable in CISCO-RTTMON-MIB will
change accord… | column | Enumeration | .1.3.6.1.4.1.9.9.633.1.3.1.3 |
| cipslaReactActionType Specifies what type, if any, of reaction to
generate if one of the watched
(reaction-configuration ) conditions is satisfied:
none(1) - no reaction i… | column | Enumeration | .1.3.6.1.4.1.9.9.633.1.3.1.4 |
| cipslaReactThresholdFalling This object defines a lower threshold limit. If the
value ( e.g rtt, jitterAvg, packetLossSD etc ) falls
below this limit and if the condition specified in
cipslaReactThresholdTyp… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.633.1.3.1.6 |
| cipslaReactThresholdCountX If cipslaReactThresholdType value is 'xOfy', this object
defines the 'x' value.
If cipslaReactThresholdType value is 'consecutive'
this object defines the number of… | column | Unsigned32 | .1.3.6.1.4.1.9.9.633.1.3.1.7 |
| cipslaReactThresholdCountY This object defines the 'y' value of the xOfy condition
if cipslaReactThresholdType is 'xOfy'. The default for the
'y' value is 5.
For other values of cipslaReactT… | column | Unsigned32 | .1.3.6.1.4.1.9.9.633.1.3.1.8 |
| cipslaReactStorageType The storage type of this conceptual row.
By default the entry will be saved into non-volatile
memory. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.633.1.3.1.9 |