cippfIpFilterTable

This table contains ordered lists of filters for 
all the IP protocol filter profiles.  Device traffic
filtering system applies filters of a filter profile 
according to the filter order position.  IP packets 
matching any filter will be processed according to 
the matching action specified by the filter or they
will be discarded if they do not match any filters.  
          
Any IP packet through an interface can theoretically
match multiple filters or rows of this table of the 
same filter profile.  When applying a filter to a 
packet, the cippfIfIpProfileTable is used to first
identify the filter profile to use, then this table 
is scanned according to filter profile name and 
filter order position.  If the packet matches all 
criteria for that row, the action defined in the 
cippfIpFilterAction object of the row will be taken.  
          
If the action for the matching filter is deny(1), 
the packet is discarded and the processing is 
completed.  If the action for the matching filter is
permit(2), the packet is accepted and permitted to 
be processed by the bridging or routing logic.  If 
the packet matches no filter in this table, the 
packet is always deny(1) and will be dropped.
          
To create a filter, the cippfIpProfileName must
already exists in the cippfIpProfileTable. No filter
can be created without an existing filter in the 
cippfIpProfileTable.  If the filter profile is 
deleted from the cippfIpProfileTable, all the 
associated filters in this table will also be 
deleted.

MIB

CISCO-IP-PROTOCOL-FILTER-MIB

OID

.1.3.6.1.4.1.9.9.278.1.1.3

Type

table

Status

current

Parent

cippfIpFilterConfig

Siblings

3

Children

1