cisTimeToLiveCheckEnabled
CISCO-IGMP-SNOOPING-MIB ·
.1.3.6.1.4.1.9.9.263.1.1.21
Object
Specifies whether Time-To-Live (TTL) check is enabled when
processing IGMP packets in the system.
Setting this object to 'false' disables TTL check when
processing IGMP packets in the system.
Setting this object to 'true' enables TTL check, whether TTL
check for IGMP packets on each VLAN is done or not is
controlled by the corresponding instance of
cisVlanTimeToLiveCheckEnabled.
Context
- MIB
- CISCO-IGMP-SNOOPING-MIB
- OID
.1.3.6.1.4.1.9.9.263.1.1.21- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cisSystemInfo
- Siblings
- 21
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cisIgmpSnoopingEnabled This object indicates whether IGMP Snooping has been
enabled for the system. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.1 |
| cisFallbackTime The object indicates the time the IGMP address aliasing mode
is fallback(2). | scalar | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.263.1.1.10 |
| cisReportSuppressionEnabled When this object is set to 'true', IGMP Snooping will
suppress duplicate IGMP Reports. When this object is set
to 'false', all IGMP Reports are forwarded to all multicast
router… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.11 |
| cisTopoChangeFloodQueryCount This object specifies the flooding period for multicast
traffic upon receiving Topology Change Notifications (TCN).
IGMP Snooping will flood multicast traffic until
cisTopoChang… | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.263.1.1.12 |
| cisTopoChangeQuerySolicitEnabled This object specifies whether the device running IGMP
Snooping will solicit IGMP General Queries from the
Querier upon receiving a Topology Change Notification (TCN).
The root de… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.13 |
| cisSourceOnlyLearningEnabled This object specifies whether Source Only multicast entries
are learned by IGMP Snooping or not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.14 |
| cisSourceOnlyEntryAgeTime deprecated This object specifies the aging time for Source Only
multicast entries when cisSourceOnlyLearningEnabled is
set to 'true'. When cisSourceOnlyEntryAgeTime is set to
0, aging is dis… | scalar | minutes Integer32 | .1.3.6.1.4.1.9.9.263.1.1.15 |
| cisV3SnoopingSupport This object indicates IGMP Snooping support for
IGMPv3 as described below:
basic(1): Basic support for IGMPv3. IGMPv3 packets are
processed similar to IGMPv2 packets. … | scalar | Enumeration | .1.3.6.1.4.1.9.9.263.1.1.16 |
| cisSourceOnlyEntryAgingTime This object specifies the aging time in seconds for Source
Only multicast entries when cisSourceOnlyLearningEnabled is
set to 'true'. When cisSourceOnlyEntryAgingTime is set to
0,… | scalar | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.263.1.1.17 |
| cisRobustnessVariable Specifies the Robustness Variable of this device. This
value will be used at each VLAN if the corresponding
instance of cisVlanRobustnessVariable is not configured. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.263.1.1.18 |
| cisLastMemberQueryInterval Specifies the IGMP Last Member Query Interval of this device.
This value will be used at each VLAN if the corresponding
instance of cisVlanLeaveQueryInterval is not configured. | scalar | milliseconds Unsigned32 | .1.3.6.1.4.1.9.9.263.1.1.19 |
| cisV3ProcessEnabledAdminStatus This object indicates the administrative status of IGMP v3
processing in the system. With the condition that IGMP
protocol has been enabled, a system will process IGMPv3
messages… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.2 |
| cisLastMemberQueryCount Specifies the Last Member Query Count value of this
device. This value will be used at each VLAN if the
corresponding instance of cisVlanLastMemberQueryCount is
not configured. | scalar | Unsigned32 | .1.3.6.1.4.1.9.9.263.1.1.20 |
| cisRouterAlertCheckEnabled Specifies whether checking of Router-Alert option is enabled
for IGMP traffic in the system.
Setting this object to 'false' disables Router-Alert check in
the system.
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.22 |
| cisV3ProcessEnabledOperStatus This object indicates the current operational status of IGMP
v3 processing in the system. This object is enabled if the
system is operating with IGMPv3 protocol. Value of this ob… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.3 |
| cisFastLeaveEnabled This object indicates whether Fast-Leave mechanism has been
configured to be enabled in the system. If Fast-Leave is
enabled in the switch, IGMP Snooping will prune the port on
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.4 |
| cisFastBlockEnabled The object indicates whether Fast-Block mechanism has been
enabled for the system. This object only has effect if the
value of cisV3ProcessEnabledOperStatus is 'true'. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.263.1.1.5 |
| cisAdminMode The object indicates the administrative snooping mode of IGMP
Snooping feature, depends on whether only IGMP devices, or
also CGMP devices are existing in the network. | scalar | CisIgmpMode | .1.3.6.1.4.1.9.9.263.1.1.6 |
| cisOperMode The object indicates the operational snooping mode of the
device. The object should return igmpOnly(2) or igmpCgmp(3)
only. Value of this object is meaningful only if the value
of… | scalar | CisIgmpMode | .1.3.6.1.4.1.9.9.263.1.1.7 |
| cisLeaveQueryType The object indicates the type of IGMP-leave query that the
device will send on the interface the IGMP-leave message was
received.
generalQuery(1) : A General Query wil… | scalar | Enumeration | .1.3.6.1.4.1.9.9.263.1.1.8 |
| cisAddressAliasingMode The object indicates the current IGMP Address Aliasing Mode of
the device.
normal(1) : IGMP is working in normal mode without detecting
address aliasing.
fa… | scalar | Enumeration | .1.3.6.1.4.1.9.9.263.1.1.9 |